Trying to connect locally to W2012 R2

Similar Questions

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• Trying to connect to a homegroup, but I need to activate IPv6.

  Trying to connect to a homegroup, but I need to activate IPv6.

  Hi SteinarDahle,

  Do any error message when you try to active IPV6?

  Method 1:

  a. right click on the network icon

  b. Select Open the network and sharing Center.

  (c) in the window that appears, select "change the map settings.

  d. in the network connections window, select the 'connection to the Local network' for the interface NETWORK integrated (or whatever it's called), then "change settings of this connection" or file > properties.
  e. in connection properties page, check the box 'Protocol Version 6 (TCP/IPv6) Internet'.

  Method 2:

  Click Start and type this command in the start search box:
  NCPA.cpl [Enter]
  Right click on the Ethernet connection or wireless you are troubleshooting.
  Select properties and acknowledge the UAC quick.
  Verify IPv6, and then click OK.

  Hope this information helps you.

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• I have windows vista Enterprise edition and trying to connect to a PPTP VPN, I get an error 691.

  I have windows vista Enterprise edition and trying to connect to a PPTP VPN, I get an error 691 name of user and password are fine, I can connect to the VPN on XP without problem.

  original title: VPN Error 691

  I was able to find a solution by the way that the domain has been configured. I was adding the complete domain name and extension (i.e. domain.local). The .local was me screwing up. I edited the domain field to only reflect the domain name without any extensions. One that I did this it worked like a charm. I have been using a VPN PPTP on a computer Server 2003 domain mixed with 2000 and 2003 domain controllers and Windows 7 Pro laptop computers. Hope this helps someone.

• connection failure: unknown username or bad password. Windows 7 computer tries to connect to Vista

  I bought a PC W7 and tries to connect to other computers on the network. I can connect to one, cannot connect to the other, but see them as well in the network and sharing Center/view network computers and devices. When I try to log into the device poor, the system automatically changes the ID of the user - I'm on ADMIN, try to connect to GUEST - it varies from my sign in COMMENTS to ADMIN_PC\GUEST.

  I connect to the local network of the W7 machine wireless. Vista machine I can connect is connected via the ethernet connection to the router. The machine, I can see, but cannot connect to is connected to a switch via ethernet and then connected by ethernet to the router.

  After reading discussion forums, it seems that this problem could be resolved through amendments to the local security policy - network security: LAN Manager authentication level, but I can't find where to do this.

  I'm at the end of my thether - I believed the hype and thought that W7 would be easy to use. What should I do to get this thing to work?

  You don't need to change anything with LAN Manager. The problem is probably related to point C below. Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. In XP, you can run the Network Setup Wizard or just enable file sharing / print in the Windows XP firewall exceptions. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.
  MS - MVP - Elephant Boy computers - don't panic!

• I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.

  I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.   Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the address of the DNS server

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\mark>ipconfig/all

  Windows IP configuration

  Name of the host...: cookiemonster

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: ccrtc.com

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-22-8B-C3

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : ccrtc.com

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : 64-31-50-43-AE-8F

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::3458:a8df:c03c:d596% 12 (Preferred)

  IPv4 address...: 75.103.136.150 (Preferred)

  ... Subnet mask: 255.255.252.0.

  Lease obtained...: Wednesday 10 October 2012 21:16:34

  End of the lease...: Thursday, October 11, 2012 21:16:34

  ... Default gateway. : 75.103.136.1.

  DHCP server...: 209.132.160.25

  DHCPv6 IOOKING...: 207892816

  DHCPv6 DUID customer...: 00-01-00-01-14-FF-6D-A2-64-31-50-2E-2F-F5

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: enabled

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-22-8B-C2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : ccrtc.com

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2002:4 67 b: 8896:4 b 67:8896 (Preferred)

  ... Default gateway. : 2002:c058:6301:c058:6301

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: disabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  Active DHCP...
  . . . . . . . . : No.
  Autoconfiguration enabled...: Yes
  IPv6 address...: d 2001:0:9 38: 6ab8:3482:e41:b498:7769 (preferred
  EXEs)
  Address IPv6 local link...: fe80::3482:e41:b498:7769% 16 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter ISATAP.ccrtc.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : ccrtc.com
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\mark >

  Hello

  Thanks for asking! If I understand correctly, you cannot connect to Facebook and get error, Internet is also slow. Try the question of fixing.

  Before I continue, I would like to collect some personal information.

  1. have there been recent changes to the system before the show?

  2. what web browser do you use?

  Method 1:

  Follow this link can not connect to some Web sites to perform the troubleshooting steps. Check if it helps.

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 2:

  Follow this link Internet connection is slow , and perform the operations. Check if it helps.

  Method 3:

  Follow this link, Update driver and update the network map. Check if it helps.

  For more information, see: link

  Answer us with the results. I'd be happy to help you further.

• Unable to connect local database using net service name

  Hello all;

  
  

  FYI: This question has been posted in high availability. Now, it has been deleted from there.

  
  

  I'm trying to connect my local database using authentication remote.

  but make a mistake. Client & server are on the same server.

  
  

  SQL > conn u1/u1@primdb

  ERROR: ORA-12545: Connect failed because target host or object does not exist

  
  

  SQL > conn / as sysdba

  Connected.

  
  

  SQL > show parameter db_name;

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  db_name chain primary

  
  

  SQL > show parameter service_name.

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  service name string mydb

  
  

  SQL > show parameter db_domain;

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  db_domain string primary.com

  
  

  SQL > show parameter global_name;

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  global_names boolean FALSE

  
  

  SQL > select * from global_name;

  GLOBAL_NAME

  --------------------------------------------------------------------------------

  PRIMARY

  [oracle@localhost admin] $ lsnrctl start

  LSNRCTL for Linux: Version 10.2.0.1.0 - Production on January 18, 2014 16:32:08

  Copyright (c) 1991, 2005, Oracle.  All rights reserved.

  From /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...

  TNSLSNR for Linux: Version 10.2.0.1.0 - Production

  System settings file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora

  Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log

  Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=oel5.linuxserver) (PORT = 1521)))

  TNS-12545: Connect failed because target host or object does not exist

  AMT-12560: TNS:protocol adapter error

  TNS-00515: Connect failed because target host or object does not exist

  Listening port could start. See the above error messages...

  
  

  -----------------------------------------------------------------------------------

  
  

  My listener.ora file content:

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = primary)

  (ORACLE_HOME = u01/app/oracle/product/10.2.0/db_1)

  (GLOBAL_DBNAME = mydb.primary.com)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oel5.linuxserver) (PORT = 1521))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))

  -----------------------------------------------------------------

  My tnsnames.ora content

  primdb =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST= oel5.linuxserver) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = mydb)

  )

  )

  --------------------------------

  $ tnsping primdb

  
  

  AMT Ping utility for Linux: Version 10.2.0.1.0 - Production on January 18, 2014 16:40:55

  Copyright (c) 1997, 2005, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = oel5.linuxserver)(PORT=1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = mydb)))

  TNS-12545: Connect failed because target host or object does not exist

  Thanks in advance...

  
  

  SERVICE_NAME =? in tnsnames.ora file should MATCH what is reported by the listener EXACTLY (like one from below)

  > Service 'mydb.primary.com' has 1 instance (s).

  Instance of 'primary', State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  > Service 'primary.primary.com' has 1 instance (s).

  Instance of 'primary', State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  > Service 'primary_XPT.primary.com' has 1 instance (s).

• ORA-28545-error when trying to connect to a MSSQL DB

  Like many others, I came across problems trying to connect to a MSSQL-DB. I tried various things mentioned in the forum, but nothing helped.

  I did the following:

  On Windows INFORDBSERVER02 servers where our Oracle11-Installation is hosted, I installed the software bridge in a different location.

  During installation, I decided to use the port 1531 for the listener, and then asked me about the connection parameters to our MSSQL Server:

  Our database is located on the 'profileserver02' server and the DB is called 'profile', but there was an entrance third (for me unknown) and I gave him the same value

  as the name of the server.

  The listener has started and there was a listener.ora with the following entries:

  LISTENER_PROFILE =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1531))

  )

  )

  ADR_BASE_LISTENER_PROFILE = D:\Ora_GW

  I then checked the initdg4msql.ora, which had entries

  HS_FDS_CONNECT_INFO = [profileserver02] / profileserver02/profile

  HS_FDS_TRACE_LEVEL = OFF

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  On the server where I want to get access, I've added an entry for the tnsnames.ora:

  dg4msql.INFORDBSERVER02 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (CONNECT_DATA =

  (SID = dg4msql)

  (GLOBAL_DBNAME = dg4msql.INFORDBSERVER02)

  )

  (HS = OK)

  )

  Finally, I created a link DB:

  CREATE DATABASE LINK PUBLIC profile02 CONNECT TO "anw' IDENTIFIED BY 'password' USING 'dg4msql.infordbserver02 '.

  I tried to access the DB in issueing of position

  Select * from dual@profile02

  I got the errormessage:

  Error: ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: before 2 lines von PROFILE02

  SQLState: 99999

  ErrorCode: 28545

  Position: 19

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02]

  that got rid of this third unknown parameter, but nothing has changed...

  I tried to use the listener.ora.sample in the dg4msql directory

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  #CONNECT_TIMEOUT_LISTENER = 0

  but then the listener has not yet started.

  Any tips?

  For the first listener that you posted you do not have a section of SID. So he won't be able to lay a bridge. In addition, it would be easier when you use the earpiece of the spawn House door entrance to the gateway process o gateway.

  So put a listener.ora file at your home, gateway network\admin with this content:

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  Then stop the LISTENER_PROFILE listener, open a DOS window and correctly set the ORACLE_HOME. Change to D:\Ora_GW\bin and start the listener using lsnrctl start.

  What I don't understand is your comment:

  "

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02] '.

  I assume you are talking about initdg4msql.ora...

  So let's just check the link if it works...

  If not, please provide a status of Auditor for the listener of the entry door and an exit of tnsping from home using "tnsping dg4msql.INFORDBSERVER02" database Oracle

  -Klaus

• Every day someone is trying to connect my Iphone. Do I have to change my password every time?

  Every day someone is trying to connect my Iphone6. Do I have to change my password every time? How can I stop this?

  Your post says that someone is trying to connect 'on' your iPhone 6 - have - they possession of the phone or they try to connect your Apple from another device ID?

  Note also that there are a number of phishing scams that send e-mails that appear to come from Apple, but are not current. Do not use any links in these emails if you are not.

  If they are trying only to log in instead of sign in successfully it would be not necessary to change your password. However, you can consider on for Apple ID - Apple Support two-factor authentication or frequently asked questions about check in two steps for Apple ID - Apple Support (if available) for more security.

  If they are correctly connected, see: If you think that your ID Apple has been compromised - Apple supports

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?