ESXi installer does not see my raid.

Similar Questions

• installation does not see the printer when I plug

  I have a printer HP LaserJet, 1006 running on a Windows XP 32 - bit attached to a USB1 port system. I have no USB2 ports. The printer works fine, but the drivers are up to date. I downloaded the file (hp_LJ_P1005_P1505_Full_Solution_ROW.exe) and when I run it, and it gets to the point where it tells me to connect my printer, I plug in and turn on and nothing happens. Apparently the installer does not see when I turn on my printer. The problem would be that it is plugged into the port of USB1 and if so what do about it?

  Sorry must have misread your first message.  Before trying to reinstall the software, make sure that the printer and the old software is uninstalled.  The installer can be easily confused by older facilities, in order to ensure that those who are cleaned before installing the latest orders.  Hope that helps.

• I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not

  I have download ESXi 3.5 VMware site, write on CD, but unable to boot from the CD, why? ESXi installation does not occur.

  Please help on this issue.

  Since there is no integration PAM for ESXi, you cannot authenticate to ESXi itself using active directory.  -What are you talking about?  You can always have virtual machine with windows and active directory.

  -KjB

  VMware vExpert

• ESXi on HP BL460C to EVA SAN, Installer does not see the disk non - ESX(I) Although not

  We have a BL460C with qlogic (QMH2462), talk to an EVA 4400 SAN with LUNS = 1 presented for a boot disk and LUN = 2 for the data store.

  San switch is Silkier, if all the paths are visible.  We have installed ESX 3.5.0 u3 on this blade to the same LUN.  The goal is to support an environment entirely multichannel without interaction of zoning, so far all porous bones have been configured to work fine until we tried ESXi

  When we try to install ESXi 3.5.0 u3 for the same logical unit number, the installer décompacte, starts, appears to find the discs and stops with an error "device cannot find support to write... on the image for.

  Is there a driver/known compatibility issue with the ESXi installation program that prevents installation in a multi-channel environment?

  I don't think that ESXi supports booting from SAN.  This is perhaps where the fuse box is.

  You must use the local storage, or possibly a 1 GB (or more) USB stick to boot from.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• ESX4i does not see the RAID controller card

  I install the ESX4 and the ESXi4. Considering that ESX sess card RAID controller, ESXi4 will not work. I was wondering if there was a solution to this?

  Memory I don't remember ESXi4 support adding additional drivers (unlike ESX4 Installer) but I was wondering if I climbed to U1 ESX4i, that would help. Or is just "not supported"?

  Concerning

  Mike Landry

  www.RTFM-Ed.co.uk

  My problem has been resolved by the way of the ESXi 4.0 to ESXi 4.0 Update 1... which includes a driver update...

  I managed to ESXi in order to run from a USB key on the servers, but found the previous day, and DPM mode did not work properley. While he was going to suspend the ESX box very well, the machine just and seems to lose its settings to boot PXE boot - regardless of what I did with the BIOS...

  I found ESX4i U1 to install on the physical disk is more reliable...

  Concerning

  Mike

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Double post please see also /questions/925441 #answer - 326583

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• Satellite Pro M70 does not see HARD drive sometimes

  Help me!

  My computer does not see my hard drive but see Installer and another computer.
  My hard drive is working and I put the new drive hard but computer does not see.
  And when I install XP on the computer I can see HDD format during the installation.
  And when prawns my computer I do not see the HARD disk again.

  Help me please

  Hello

  I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

  Good bye

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• ENVY 4520: Computer does not see section scanner WANT

  Last weekend, I bought a 4520 want TO replace a malfunctioning Lexmark all in one. I quickly learned that the software for this printer avaulable was not available for Mac OS X 10.7.5 (Lion). However, I followed the instructions on the Apple and this site and downloaded the appropriate drivers for the 4500 series. I am able to print wireless from my Mac, but when I attempy yo scan, the 4520 does not appear. In fact, printing and control panel Scan sees not the 4520 otherwise than as a printer no scan option available. Utility HP 'sees' the fevice but offers no adjustment of parameters. The application of scanning HP, does not see it no more.

  While printing is the main reason I bought this unit, the scan function is also valuable and I would like to be able to use it. Of course the current HP software does not support my Mac and OS (Lion) - are there any ear; first versions of installation scanning software partitions. If not, do you have suggestions for () maybe) generic software that will allow me to use the scanner?

  -colin

  Hi Colin,

  Sorry for the frustration you must be feeling.  I did some checking and confirmed that HP only provides drivers scan of your product on OS X 10.8 and later versions.  This product also supports the Apple AirPrint (scan) functionality, which allows you to scan without HP software, but still this support is only available on OS X 10.10 and later versions.

  I am not familiar with the features of 3rd party scan applications.  My only suggestion would be to consider upgrading the version of the OS on your Mac (if possible) because this opens up your options considerably.

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip