Evaluation of posture before logon - possible with ISE?

Similar Questions

• Evaluation of Posture ISE

  Hello
  I'm doing an assessment of posture on a Linux OS with ISE 1.4 and Anyconnect 4.x, we also
  Use cisco ASA 5500-x for VPN connections. but the document says that Cisco ISE does not support on Linux OS, the posture assessment
  I was wondering is there any workaround for this problem solution
  or it's the limitation of technology and we should wait. did anyone done this before?

  Thank you

  There is no support for linux with anyconnect ise posture.

• Evaluation of posture transmitted by mistake using Cisco ISE

  Hi all

  I would like to help try to understand why a customer who has not been connected to the network for a little over a month has allowed full network access despite being older than 28 days AV definitions.

  We have 2 mandatory requirements of posture,

  1 Symantec Av MUST be installed

  2. the definitions AV MUST be expired LESS THAN 28 days

  Currently, the machine I have watch the defs AV as being 25 March 2013.

  When I produce the detailed report posture, it shows me even that the two mandatory requirements described above were successfully which means that the endpoint is compliant posture. Clearly this is not the case if...!

  Is there anything else I can check on the ISE to help debug this?

  Mario

  Hello

  You may have two problems:

  1 al ' ISE, you have a set global clients not supported of the NAC Agent (Android, etc.) that specifies what their default state of compliance. If the default setting is "consistent" and you do not have a rule in this customer service or you simply do not have client provisioning rules, any machine that does not fit in the provisioning rule (IE thinks them ISE which is not supported) Gets a consistent event compliance status if NAC Agent is installed and that the rules are not met.

  2. problem of ANC Agent version?

  I saw in the papers that you use NAC 4.9.1.6 agent but the latest NAC Agent recommended to be used with (later) ISE is version 4.9.0.51.

  4.9.1.6 is a version of NAC Appliance and Cisco does not guarantee that is 100% compatible with ISE.

  Check

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/compatibility/ise_sdt.html#wp78131

  Cisco NAC Agent Interoperability Between NAC Appliance and Identity Services Engine (ISE)
  Cisco supports different versions of the NAC Agent for integration with  NAC Appliance and ISE. Current releases are developed to work in either  environment, however, interoperability between deployments is not  guaranteed. Therefore, there is no explicit interoperability support for  a given NAC Agent version intended for one environment that will  necessarily work in the other. If you require support for both NAC  Appliance and ISE using a single NAC Agent, be sure to test NAC Agent in  your specific environment to verify compatibility.
  Unless there is a specific defect or feature required for your NAC  Appliance deployment, Cisco recommends deploying the most current agent  certified for your ISE deployment. If an issue arises, Cisco recommends  restricting the NAC Agent's use to its intended environment and  contacting Cisco TAC for assistance. Cisco will be addressing this issue  through the standard Cisco TAC support escalation process, but NAC  Agent interoperability is not guaranteed.
  Cisco is working on an approach to address NAC Agent interoperability testing and support in an upcoming release.
  

• XP hangs before logon for the user profile.

  Propely at startup of Windows, but XP hangs before logon for the user profile.

  The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.

  What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.

  Hi ANM

  · Have you created an image of the system using Norton ghost backup software?

  When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.

  If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.

  If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ASA 5525 X Anyconnect configuration with ISE 2.1

  I have a new deployment of ISE 2.1 which is used only for the management of the devices at the moment.  The intention is that it will serve as radius for authentication of our VPN server.

  5525 x is a brand new ASA runs the 9.4 code.  I want to configure VPN on the SAA strategy so that each user is assigned a DAP based on their Department.

  I already have the designation of the Department for user accounts assigned in AD through a group membership.  I don't know how to get ISE to belonging to a group at the ASA so that she can associate the user based on this correct in RAP group membership.

  I succumbed to determine how this is supposed to work.  Thanks for any help.

  @Jonathan Harrison ,

  Normally we authenticate and authorize users and then push DACL or allow connection from ISE etc. of such conditions profiles that check results Posture or parts constituting the identity of the user (such as AD or another external identity store belonging to a group).

  There are a couple of good guides to do so, including detailed examples:

  https://communities.Cisco.com/docs/doc-68158

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-app...

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  While they focus on the case of use of Posture, they can be adapted to add other uses. For example, ISE registration condition may be the result of not only a Posture check also membership in a given group or another if you make it a State.

  I do not think we can specify to the ASA to call a given font of DAP like Hostscan module cannot be used at the same time that the module ISE Posture. However, you should be able to accomplish just about everything you used to depend on the DAP with ISE Posture Module AnyConnect (assuming you have AnyConnect 4.x Apex licenses).

  If you want to stick with the ASA DAP model, you can forgo using policies and module ISE Posture and instead create an authorization profile (result) to send the ASA, a pair of RAY - V based on a correspondence (in the authorization of the ISE policy) with the ad group. He is a "Cisco-VPN-3000" A - V called "PIX7x-members-from' that can be used in ASA dynamic access policies. You can see (and all other pairs A - v supported buy ISE) here:

  https://communities.Cisco.com/docs/doc-67894

• ASA Windows7 and startup-before-logon problems (SBL)

  We try in vain to get Windows7 SBL working with configuration following (SBL works for XP);

  ASA5520

  ASA 8.0 (4)

  ASDM 6.1 (5)

  AnyConnect 2.4.1012

  VPN Plus license (SSL VPN peers 100)

  When you configure the group policy for Clent download optional Module we have option for vpngina and can not see module start before logon (EPP), in paragraph 2.4 of the AnyConnect Client documentation.

  Is this a problem of license type or do we need an ASA/ASDM software update?

  Thanks in advance for your help.

  The following doc can be referenced on the rest of the SBL configuration:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809f0d75.shtml

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Client VPN 3.6.3.B - start before logon - connection fails immediately

  It is the most extraordinary and I can't decide if the problem is with the VPN, Windows 2000 Dialer, the Toshiba Tecra 9100 or a combination of both.

  The problem happens when 'Enable start before logon' is ticked on and I try to dial up the ISP before logging on to Windows. When you click the button to connect, the historical connection window immediately:

  Initializing the connection...

  Cannot establish a connection with your ISP.

  The modem never seems to receive the command to dial a number.

  Other specific comments:

  1. If I'm already connected to standalone Windows on the laptop (i.e. not connected to a local network), the VPN dialer works perfectly and I am able to establish a tunnel (although I can't authenticate with a domain controller)

  2. on this same machine with the same version of the VPN Client, I have not experience this problem when Windows XP has been installed. (I hate XP that is installed on the new machine. I downgraded to Windows 2000 SP2 After reformatting the hard drive.)

  Everyone knows about this problem? Does anyone have suggestions for troubleshooting?

  Hello

  I you suggest trying to create a new entry for remote access for the access provider (using the dial-up connection to the Public Network option), and then try to use NFP, or on the other hand you can try creating a new vpn connection entry and then try that as well.

  This feature works fine with 3.6.3 client versions.

  Thank you

  AFAQ

• We can connect remote vpn ipsec before logon in windows?

  can connect us to the vpn remote ipsec before logon in windows? is there an option in cisco vpn client?

  Hello Krishna,

  You can do this with the start function prior to logon.

  The following link describes the same thing:

  http://www.Cisco.com/en/us/docs/security/vpn_client/cisco_vpn_client/vpn_client500_501/release/notes/51client.html#wp1568402

  You can even activate as follows:

  VPN client > options > Windows user properties > check the box "enable start before logon".

  I hope this helps.

  Kind regards
  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved.

• I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  Look for the hand brake.

  It is a free application which can convert your DVD to QuickTime formats.

• On the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  Hi, on the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  I don't think it is necessary for the remote control of Siri.

• I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

  The ColorfulTabs extension can be useful for you.

• Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  This will show you the model and year: https://checkcoverage.apple.com/

  If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)

• Is this possible with the 6 having touch 3D iPhone

  Is this possible with the 6 having touch 3D iPhone

  Is there anyone to answer my question pl

• Dictation of texts long is possible with an iMac?

  I have to dictate texts long very often. Is this possible with an iMac? What do need me for this? The quality-related experiences?

  The Mac OS fact have the ability to dictation built in but I find it annoyingly inaccurate even in more precise mode. When I use it, I find I have to correct several errors, usually involving misunderstood words and some very strange kinds of mistakes as well. In General, I can type faster that I can dictate and correct.