Exadata and node Timestamp

Similar Questions

• accidentally ran root.sh as installation of cluster grid in node 2. Now, node 1 has + ASM2 instance and node 2 has + ASM1

  Version of the OS is redhat 5

  Network cluster version is 11.2.0.4.2.

  I accidentally fell root.sh as cluster grid facility in node 2. Now, node 1 has + ASM2 instance and node 2 has + ASM1.

  I bet that node 1 is not the primary node now. How to fix this?

  Urgent help please. I have to go forward to the installation of the db.  It is a prod environment.

  Appreciate your help.

  Hello

  Unconfigure and reconfigure the clusterware.

  as root

  (1) ' $GRID_HOME/crs/install/rootcrs.pl - deconfig-force "on Node2

  (2) "$GRID_HOME/crs/install/rootcrs.pl - deconfig - force - lastnode" on node1

  (3) run root.sh on node1

  (4) run root.sh on node2

  See you soon,.

  Krisz

• Execution of Javascript different ESTK and Node.js

  I have this function to clean up text for the JSON output that simplifies the line different stream formats and escapes the quotes. So far, it worked fine, but now I've noticed that when ESTK and Node.js provide different output when it is executed with a change of line:

  • ESTK outputs '\n '.
  • Node.js outputs "\\n".

  
  

  That is the different treatment of the literal string gets, but don't know if it's the parsing Javascript or replace itself. Thoughts, ideas?

  sanitizeJsonText: {function (str)}

  return str.replace (/ \r\n/g, "\\n")

  Replace (/ \r/g, "\\n")

  Replace (/ \n/g, "\\n")

  Replace (/ \'/ g, "\'")

  Replace (/ \ "/ g," \ "");

  },

  Nevermind PBCAK. Question has been duplicated escapes into the branch of a code that was not used in ESTK that was matched debug printing behavior of duplicate code

• Exadata and 12 c

  Hello gurus,
  
  Could someone share what is the difference between Exadata and Oracle database 12 c? As I looked, it does not show only 12 c OEM that supports the exadata environment but there is no database of such 12.
  
  Please correct me if I misunderstood.
  
  Thank you
  Amit.

  The version of database 12 c has not yet been published - that is to say, it's not GA (it was in the beta program of last year).

  Exadata is currently 11gRelease2.

  Hemant K Collette

  Published by: Hemant K Collette on February 1, 2013 13:25
  Adding line on Exadata

• When creating collections and nodes via PHP setting is not the storage schema

  Hello!
  I am trying to create cat Collection and nodes with PHP backend.
  I use this setup as the basis for all nodes with small changes:

  static private $CHAT_CONFIGURATION = array(
     'accessModel'=>self::ROLE_VIEWER,
     'publishModel'=>self::ROLE_VIEWER,
     'persistItems'=>true,
     'modifyAnyItem'=>false,
     'userDependentItems'=>false,
     'sessionDependentItems'=>false,
     'itemStorageScheme'=>self::STORAGE_SCHEME_QUEUE,
     'allowPrivateMessages'=>false,
     'lazySubscription'=>false,
     'p2pDataMessaging'=>false
  );
  

  STORAGE_SCHEME_QUEUE = 1
  And this value has changed not for any node of hostory_ *.
  But when the node created I'm trying to use the chat and may not serve more than one value. Then I checked the configuration of the node from room console and found that this storage system has the value ITEM UNIQUE. When I changed it (using the room console) to TAIL cat began to work properly. How to set up the storage system correctly?
  Thank you!

  Well, I still don't know what it is.

  I tried your code and it works fine for me. After you run your 'createSession_chat' on a room newly created, I call getNodeConfiguration on the new nodes and that's what I get:

  -ALL-

  http_get: https://na2.collaboration.adobelivecycle.com:443/app/rtc? path = / chat_1/nodes/history/config print

  10.0 true false 1.0

  -PARTICIPANTS-

  http_get: https://na2.collaboration.adobelivecycle.com:443/app/rtc? quotes/configuration of the path = / chat_1/nodes/history_partic

  10.0 50.0 faux 1.0

  -HOSTS-

  http_get: https://na2.collaboration.adobelivecycle.com:443/app/rtc? path = / chat_1/history_hosts/nodes/configuration

  10.0 100.0 false 1.0

  -TYPING-

  http_get: https://na2.collaboration.adobelivecycle.com:443/app/rtc? ration = / chat_1/nodes/typing/adjustment path

  true 10.0 false 2.0 true

  ItemStorageScheme values match the values you used during the creation of nodes.

  Not sure what disaster happens with the Whiteboard because everything you showed us so far was connected to the nodes of cat, and I guess that I have no intention to proceed with changes to the PHP code since everything seems to work as specified.

• Hierarchical query, differentiate between the leafs and nodes?

  Hello
  
  I started coding a small program PL/SQL (not finished) with a hierarchical query:
  

  DECLARE
  
  CURSOR cur IS
  select 
    op_id||' '||op_descript as description, level
  from operations
  connect by prior op_id = op_parent_op_id
  start with op_id = 0;
  
  BEGIN
  
  HTP.prn('<ul id="arbre2" class="filetree">');
    for c in cur loop
      HTP.prn('<li><span class="folder">'||c.description||'</span></li>');
    end loop;
  
    HTP.prn('</ul>');
  END;

  This program must return a hierarchical HTML code like this (he does not at the moment):
  

  <ul id="arbre" class="filetree">
   <li><span class="folder">Folder 1</span>
    <ul>
     <li><span class="file">Item 1.1</span></li>
    </ul>
   </li>
   <li><span class="folder">Folder 2</span>
    <ul>
     <li><span class="folder">Subfolder 2.1</span>
      <ul>
       <li><span class="file">File 2.1.1</span></li>
       <li><span class="file">File 2.1.2</span></li>
      </ul>
     </li>
     <li><span class="file">File 2.2</span></li>
    </ul>
   </li>
   <li class="closed"><span class="folder">Folder 3 (closed at start)</span>
    <ul>
     <li><span class="file">File 3.1</span></li>
    </ul>
   </li>
   <li><span class="file">File 4</span></li>
  </ul>

  then jQuery will make a tree.
  
  But I don't know how to differentiate leafs and nodes in the request, to allow me to specify a class = 'file' or class = 'file '.
  
  Does anyone have a solution?
  
  A more general question might be: how to generate a hierarchical HTML code exactly as it is above my table operations (op_id, op_parent_op_id, descript).
  
  Thank you.
  
  Yann.

  Discover the CONNECT_BY_ISLEAF pseudo-column. Returns 1 if it is a leaf and zero otherwise.

  HTH!

• Geolocation and the timestamp in iphone > iCloud > iMac - what Photos Dungeon?

  Hello

  my employer takes 4 cameras with SD cards, 1 iphone more than 6s and 45 odd customers out in January. We are trying to work on how I can access the photos they take to create photo albums custom without us catching up to directly download of SD cards on the iMac (me in the office... a few hours drive...)

  So far, they just bought the iphone 6 s more and were planning to do a SD card reader to pick up the phone and import photos. Then synchronization using "my photo stream" so that I can see the images on the desktop iMac. (also nine).

  What worries me is that my workflow has the timestamp of all the images, also the geo-tagging. Up to now I imported directly from an SD card directly on the iMac and date stamps camera are here. I'm afraid I'll lose this information via iCloud.

  Please can someone confirm what metadata are kept intact during the transfer? That is to say iphone > icoud > imac for editing and album creation?  I know about 4 000 pictures in January, so I really need them stamped and geo tagged.

  Thank you, Pippa

  Edited to add:

  Combinations of material used for this project:

  6 sec more than 64 GB iPhone

  iMac 27 inches the big one!

  SD cards with several Cameras Nikon «cool pix»

  Final result: individual customer photo printed by Apple albums.

  Wanted to add - they look a "lightning of SD card reader.

• Graph and node property

  Hello all;

  I want to do my most powerful .vi, so what I wanted to do are the following:

  1. my entry should be: "checkbox system Boolean" table 1 d (it's must have, I need this as input in the function call library node)

  2. all these checkbox (12) are connected to the graph (in this example, I chose 12 graphs and a signal input which is the same, in real time, I have different signals, the scales...)

  What I wanted to do when I check the first box, first graph will appear (and on the graph will display its name, which is identical to the box). And then for example if I choose will be 3,5,8 checkbox graphic 3,5,8 which will follow one after the other and so on;

  I started making table 1 d box, but after I group all together and try to rename it for example check box 1 for channel 1, is to change all names not only those who I have renamed it. I know that I can use 'property node' and choose 'visible' and 'value', but I don't know how to implement together and also move graphic one after the other, if I choose for example 1,5,8 channel.

  I attach test file and photo;

  Thank you

  Look at this.

  This makes the Cluster to table as I talked earlier and locates also each chart based on a table of positions.

• DMA FIFO and node VHDL

  Hi guys!

  I am writing here after many days of attempts without success...

  My request is 'simple', send data from the Panel of Labview RT within a DMA FIFO target host. Then the FPGA core receives data and imported through a knot of VHDL processes, and then after the data is pointing to the Labview RT through a target to host DMA FIFO.

  I tested my node VHDL simulation mode in Labview FPGA where data sent by a target scope THAT FIFO and just work fine.

  But when I try to run the node VHDL in the real target with data from the RT by DMA FIFO basis, it won't. I already do some checks:

  -Data are properly sent through the host target DMA FIFO;

  -The data are correctly received in the FPGA base;

  -The data are correctly sent to the node VHDL;

  -Result of the node VHDL are correctly sent to the heart of the RT through the target to host DMA FIFO;

  -Result are correcly received in the heart of the RT, , but the result is false and absurd. But I have proof that my node is semanticly correct with my mock test

  So my question: are there reasons to see my work VHDL nice knot in simulation mode and not in mode real target with data from the base RT by DMA FIFO taking into account data Transfer between DMA FIFO work well in both sides? Is there some sample available with data send RT FPGA-based via DMA and data processing with a knot of VHDL and returned to the RT kernel to inspire me?

  I can't post my screw here because I work for a company, I use a MyRIO with Labview FPGA 2014 target.

  Thank you guys! I am available for some details on my implementations.

  Afghow.

  Hey!

  Thank you for your answer but I solved my problem. Indeed, at first, I tried to make a knot of Combinatorics (without clock) pure, but the problem seemed to come from that.

  I modified my node in order to incorporate a clock, according to the prescriptions of this white paper: http://zone.ni.com/reference/en-XX/help/371599K-01/lvfpgaconcepts/ipin_prepare_ip/ . And now, every thing seems to work well.

  The question remains why the combinatorial node has worked in simulation mode en not in the actual target?...

  But for people with the same problem, I suggest add them a CLK and check an edge of entry with rising_edge (CLK) and if it does not, add an input signal to check if the input signals are valid or not.

  Afghow.

• Vista and NOD 32 antivirus software compatibility issues

  I have Vista and you just install software antivirus NOD 32 but the component Security Center Windows on my compputer says that it is not compatible. How can I fix the problem so that I can run NOD 32 on my computer safely and effectively manage updates?

  When you installed it were there problems?

  If you opt for a trial to reinstall right click on the Setup.exe, and then selecting the option "Run As Administrator"?

  See if something interferes with NOD32, maybe another program of security as Windows Defender?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  See what this article says about the C:\Windows\System32\Wbem\Repository and corruption of the database.

  The Windows Security Center displays incorrect information on my ESET security product
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN367&ACTP=search&viewlocale=en_US&searchID=1263926034562

  You will find the official Forum of Support of NOD32 on Mr. Wilders Security.
  http://www.wilderssecurity.com/search.php?SearchId=3575798

  When I used NOD32 was (and probably still is) a very good product, but I found that I have doesn't have protection money and now shoot with good sense and that one of these free products.

• Stop a server managed using WLST and Node Manager

  Hello

  I use Node Manager (NM) to start my managed servers. After connecting to the Server Admin, I run the command:

  Start ('myserver1', 'Server')

  I check the log file and the console and the managed server shows no error, either it RUNS. The tail of the log file says "SOA platform is running accept queries"

  I'm now trying to write a script to stop for the same managed servers. I connect to the Node Manager via wlst, connect to the Admin Server successfully and deliver:

  Shutdown ('myserver', 'Server')

  Here is the error I see in the managed server log file:

  [JCABindingManager]: this operation is not supported for JCA base MDB.

  The managed server then passes State SUSPENDED.

  I have renamed the data files, cache and tmp, restarted the server and once again tried to arrest him, but the same thing happened.

  Any suggestion is appreciated.

  Thank you

  Andy

  What happens if you add strength = "true" as an additional parameter for your

  stop command?

• Problem starting managed server and Node Manager

  Hello

  I created the WebLogic domain with 2 managed servers. I use Jdevevloper11.2.3 integrated WebLogic server.  I can't start the servers ManagedWebLogic. On the console, I get an error stating:

  "For the server Server1, the Node Manager associated with new_Machine_1 of the machine is not accessible."

  Nor any of the management server is started through the startManagedWebLogic.cmd. Any help on this?

  Hello

  To start the managed from the console server, you must first start the node Manager process and then you can start managed based on the console server.

  Find the link to the screenshot of how to configure Nodemanager and start the managed server.

  NODE MANAGER configuration and starting managed server from Console - weblogicexpert

  To start the managed break with start-up follow the link below Scrip.

  Starting/Stoping Weblogic Managed Server - weblogicexpert

  It may be useful

• Port of DRP and node Configuration of workflows in the Env Production

  Hello

  In my production env. I have 4 servers running BCC cluster, if I have to configure all these in workFlowProcessManager.xml as below to support automatic creation and deployment of the BCC Production projects env OR just need to configure only PUB1:8850 and copy workFlowProcessManager.xml into ATGDIR/haveblishing/localconfig/atg/epub/workflow/process/workflowProcessManager.xml so that it will apply to the entire cluster servers?

  <? XML version = "1.0" encoding = "UTF-8"? >

  < process-manager-configuration >

  < Server-Editor-process >

  < Servername >PUB1:8850< / server name >

  < / Publisher-bailiff >

  < Server-Editor-process >

  < Servername >PUB2:8850< / server name >

  < / Publisher-bailiff >

  < Server-Editor-process >

  < Servername >PUB3:8850< / server name >

  < / Publisher-bailiff >

  < Server-Editor-process >

  < Servername >PUB4:8850< / server name >

  < / Publisher-bailiff >

  < / configuration-manager-process >

  Thank you

  Wonderful Shaik and again thanks a lot.

• the value node id and baud rate by lss (CANOpen)

  Hello

  for a research project, we try to use 2 volume CAN flow sensors (http://www.hydrotechnik.com/english/QT106_DSEN.pdf) . For use in our network CAN I first set up the node id and the baudrate of each of them. The manufacturer told me to do it via the put layer Service (LSS). (How) I can do using Labview?

  I can use one of the following cards, NEITHER CAN: NI PCI-CAN/2 and NOR-PCI-8512.

  Thanks for the tips.

  Greetings,

  Thomas

  Unfortunately, none of your interfaces are compatible with CANopen. You will need a PCI-8531.

  The flow rate in baud rate and node id can be configured easily with the library OR industrial for CANopen communication .

• Creating a configuration supported MSCS by using the node and sharing of majority files in VCD?

  Would like to know if 1.5 VCD with Vcentre 5.0 & ESXi 5.0 can support SQL2012 of installation of the cluster using the majority file sharing and node running on Windows 2008R2

  not that I can find.  Maybe you can be a first and blog the heck out of him.