Explorer crashes often with 'ShredderContextMenu.dll '.

Similar Questions

• Explorer crashes often

  In recent days, Explorer crash. Before crashing, my computer freezes and the mouse is not responding or is moving too slowly. It happens every day. I use Windows 8 unilingual with Intel Pentium G2010 2.80 GHz CPU and 2 GB of ram.

  The Module 'fault' is not formally identified:

  Fault Module name: StackHash_ccc1
  Fault Module version: 0.0.0.0
  Module Timestamp error: 00000000

  It can help to see what modules are loaded during the crash.

  You can download and run the following application (AppCrashView):

  http://www.NirSoft.NET/utils/app_crash_view.html

  Click on one of the mistakes recent explorer.exe.

  Can you copy and paste the information that appears in the lower window that loaded modules.

• Applications crashing - problems with urlmon.dll

  Many applications "has encountered a problem and needs to close" message at startup. First noticed with the Flash plugin, but now in Fireworks, Dreamweaver, Internet Explorer, Flash, all affected. Seen a similar problem on these forums and instructions followed to reregister the urlmon.dll that is mentioned in all the error messages. Successfully re-entered the .dll, but problems persist.

  Hello

  ·        When you encounter this error message, at random, or whenever you try to open any application?

  ·        Since when are you facing this problem?

  ·        Remember to make any change to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest opening the applications in safe mode with network and check if the problem persists. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode with networking from the list and press ENTER.

  Method 2:

  I suggest you todo a SFC scan. Of file system (CFS) when checking that all the Windows XP system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

  If the problem started recently then, I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Explorer crashes constantly on the new Asus

  I bought a new X53SV-SX288V Asus with windows 7 64 bit on it and after installing some programs Windows Explorer crashes constantly for some reason any...

  I have restored the pc to factory a couple of times now, hoping it might fix the problem, but it is persistent...

  Windows Explorer crashes often and sometimes it seems that the problem has disappeared, but then it happens randomly. When I restart the Explorer usually just, it freezes again and gives me the same error permanently after each restart of Explorer... it just crashes, restarts, block immediately, restart and so on...

  I don't know what to do. I'm not much of a geek...

  The thing is, the problem occurs only after you have installed programs. Not directly after the time I restore settings, is probably not a hardware problem (I think).

  Still, I installed an antivirus before anything else.
  First of all, I tried Comodo several times. Then Avira. And now I'm with AVG. Thus, all the programs I download should be good.

  Side note: programs Evernote who install are all widely used programs like CCleaner, Skype, iTunes, Chrome,... All of their own websites, so I do not understand how they are the problem.

  Is it possible that this is a problem material, even when the problem occurs only after you have installed (well known) programs?

  How to fix this problem?

  Here is the message that comes up with the error:

  -----

  Description:

  Stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Explorer.EXE

  Application version: 6.1.7601.17567

  Application timestamp: 4d672ee4

  Fault Module name: ASUSWSShellExt64.dll

  Fault Module Version: 1.1.0.27

  Timestamp of Module error: 4c7f631d

  Exception code: c0000005

  Exception offset: 00000000000051da

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1043

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  -----

  Just to follow up on the post of madtor.

  The shell extension which seems to be the cause of the accident is the ASUSWSShellExt64.dll:

  Fault Module name: ASUSWSShellExt64.dll

  Fault Module Version: 1.1.0.27

  The ASUSWSShellExt64.dll appears to be from ASUS WebStorage software.

  The same problem has been reported in the following link:

  http://Forum.asuswebstorage.com/showtopic.aspx?TopicId=205

  Try to update or if necessary, uninstall the software ASUS WebStorage.

• Windows Explorer crashes failed msvcr90.dll

  Friends

  I have this most annoying problem. It happens on my computer and the computer of a friend. I have Vista Pro 64 bit and my friend a Windows 7 Home Premium, also 64-bit.

  We both use the same two programs for a specific project, we want to do. A program is a data management program called FieldWorks, where export us the data in the format of LibreOffice. I think that this problem started during the installation of LibreOffice and then begins to export stuff in the program of FieldWorks.

  Very often, when we click on an exported file in .odt (LibreOffice) on the desktop, or simply click anywhere in a folder on the desktop, where we store .odt files, then immediately the Windows Explorer crashes with the following error message:

  Explorer Windows has stopped working. Windows can check online... Check online... The details of the problem are:

  Problem signature: problem event name: BEX64 Application name: the Explorer.EXE Application Version: 6.0.6002.18005 timestamp of the Application: 49e02a1e fault Module name: MSVCR90.dll fault Module Version: 9.0.30729.6161 fault Module Timestamp: 4dace4e7 Exception offset: Code of Exception 00000000000552d 4: c0000417 data exception: 0000000000000000 OS Version: 6.0.6002.2.2.0.256.6 locale ID: 1033 additional information 1: complementary 46e0 2 information: information additional 4ce498f1e2ebb3719af008d4ef97bedc 3 : 7 d 05 additional information 4: 729ac305dabb24e28fbe99019ecbbab7
  Also my friend and I get the exact same message and the same fault Module name and version. It can happen several times in a row, insofar as we cannot get to any of the .odt files in the folder via the Windows Eplorer window or desktop, but I got a remove the .odt file in a command window.  Otherwise just Explorer to crash. :-(

  I tried many things to fix this, among them:
  1. I re-entered the msvcr90.dll
  2. I learned that it is the program of MS Visual C++ 2008 that installs this msvcr90.dll and use it
  3. I removed all instances of MS Visual CC ++ Vista computer
  4. I removed all instances of the msvcr90.dll and restarted. Then I made sure that no file with this name has appeared again.
  5. even after that I still get this crash explore with this error message about this being the fault module msvcr90.dll!
  6. I used Windows find defective or missing files, sfc scannow. No gain.

  How this possible error, if there is no msvcr90.dll is left on the system? And no Visual C++ 2008?

  I then tried to reinstall MS Visual C++ 2008 SP1 Redistributable to see if that helped, but once again no change. :-( The same error came once again. This version of Visual C++ have not yet installed a version of msvcr90.dll but a msvrc100_XXX.dll

  Until I deleted the MS Visual C++ 2008 (and 2005 and 2010) of my system, I noticed that the existing msvcr90.dll was not even the same version that says that this error report is the version of the Module of fault!

  I am quite at a loss here. What can I do to solve this problem, which is annoying and time consuming? I could send one .odt files, someone at Microsoft to look at, or what?

  Thank you
  Calle2012

  The problem seems to be the shlxthdl_x64.dll:

  WARNING: Unable to verify timestamp for shlxthdl_x64.dll
  ERROR: Module load completed but symbols can be loaded for shlxthdl_x64.dll
  Failed to load image C:\Windows\System32\ieframe.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ieframe.dll
  Probably caused by: msvcr90.dll (msvcr90 invalid_parameter + 70)

  The shlxthdl_x64.dll, which is at version 3.6.1.2, is a component of LibreOffice.

  The error that you are experiencing seems to be a known issue:

  https://bugs.freedesktop.org/show_bug.cgi?id=52078

  This problem can be fixed in an update of LibreOffice, so make sure you're running the latest version.

  If you are running the latest version of LibreOffice or if the error persists you can try the following:

  Go to the following folder:

  C:\Program Files (x 86) \LibreOffice 3.6\program\shlxthdl

  In this folder, right-click and rename the shlxthdl_x64.dll to shlxthdl_x64.old.

• Problem with explore crashing.

  Separated from this thread.

  I have problem with explore crashing. This web page has not a place to post my question.

  Details of the accident are:

  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  The failed module name: ole32.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c92c
  Exception code: 0xc0000005
  Offset: 0x00000000001729ac
  ID of the process failed: 0xcb0
  Start time of application vulnerabilities: 0x01cfd840a81222d8
  The failing application path: C:\Windows\Explorer.EXE
  The failed module path: C:\Windows\system32\ole32.dll
  Report ID: 7ae39c84-444c-11e4-b245-00030d000001

  Try this link:

  http://support.Microsoft.com/kb/2541119/en-us

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Digital Photo Professional crash with ntdll.dll

  Digital Photo Professional crash with ntdll.dll Module fault. Error message reads Viewer DPP module has stopped working, and then closes. Failed application DPPViewer.exe, version 3.8.0.0 failing module ntdll.dll, version 6.0.6002.18005

  Please please help, this problem makes me crazy.   I used Canon's Digital Photo Professional for a little while, then all of a sudden it started crashing whenever I go into one folder other than the one it opens upward in, which is the office.  I had updated some drivers between it works and does not not and maybe do a few other things, but nothing significant that pilots.  I've restored since the pilots said, they were the USB drivers in Device Manager, but they are back to normal now.  I uninstalled and reinstalled many times and we have tried various other things also.  Please HELP, it is important in my work flow software.

  I opened the event viewer, and that's what it came with:

  Failing application DPPViewer.exe,

  version 3.8.0.0.

  timestamp 0x4b2f0b54,

  failed ntdll.dll module,

  version 6.0.6002.18005.

  timestamp 0x49e03821,

  exception 0xc0000374 code,

  offset 0x000afaf8,

  process 0xa98 ID,

  start time of application 0x01cadce8e36a701b.

  I spoke to Canon and they said that, because it is ntdll.dll that causes the problem, then is there nothing they can do.  I noticed that the ntdll.dll version is the same version that the drivers I have has been updated since and am now back to.  Is there a link? Really bad, I need this problem sorted and preferably without a new installation of windows.

  Thanks a lot a lot.

  Jakob Tungelund

  Hello

  The DPPViewer.exe is a Canon utility to check with their support for any updates and/or
  known issues. The error occurs when not not using the program from Canon? If not then it is in fact
  caused by the program of Canon or its associated drivers.

  The ntdll.dll is actually leads to the fault and it not actually the cause of the error.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Explorer crashes when the click with the right button on folders

  My Windows Explorer crashes whenever I right click on a folder, any folder.  It is for me a "Windows Explorer has stopped working" then it gives me a warning 'Windows restarts.  Then he closes my Explorer window.  I tried many things to see if that would help and nothing has done so far.  Anyone has any suggestions on how to solve this problem or knows what could be the problem?

  Click right problems are very often caused by third-party programs adding entries in the context menu.  Here is a program that can help you manage these inscriptions: http://www.nirsoft.net/utils/shexview.html.  Here, another article written for XP, but it applies to Vista that may be useful: http://windowsxp.mvps.org/context_folders.htm.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Windows Explorer crashes when you try to open avi files

  I can't open avi files as windows Explorer crashes, if I open even a folder with an AVI in it, then windows Explorer crashes.

  I tried to run the Mats_run_codec from microsoft, but it just says: I need to run dot_run_fx (box 2), but when I run it I get the error message - system error: 0 x 80131107.

  I am running windows XP SP3

  I have seen "Event Viewer" and found the following: application

  Event type: error

  Event source: Application Error Event Category: no ID:1000 event date of publication: 14/03/2011

  Time: 20:04:22 user: n/a

  Description:

  Failing application iexplore.exe, version 6.0.2900.5512, failed module urlmon.dll, version 8.0.6001.19019, address 0x0002df6e failure. and the other error event is - Faulting application explorer.exe, version 6.0.2900.5512, failed module ntdll.dll, version 5.1.2600.6055, fault address 0 x 00011053.

  I hope someone can help as this has happened for a few weeks now.

  Firefly1z

  FIXED! Large.

  Windows Essentials Codec Pack (WECP) corrected all the problems immediately.

  "WECP is designed as an almost complete solution for all your video and audio should" see: http://www.mediacodec.org/

• Windows Explorer crash exception c0000005

  Original title: Windows Explorer Crash

  When I try to create a portfolio of 'My Documents' explorer.exe crashes. He bagan when the Briefcase is not responding because Data Execution Prevention stopped the process. Then begins the Explorer window crashes. The application error message is that it generated an exception c0000005 at address 7E4DB9AA2(,nosymbols>). The following error - what the failing application, version 6.0.2900.5512, faulting module synceng.dll version5.1.2600.5512 explorer.exe. address failure 0x00001a11. What is my problem and how do I fix it. Please help me. I need to sync my files desjtop with my laptop because my laptop crashes. Now my office explore does not work.

  Thank you

  Nancy

  Windows XP service Pack 3

  If you have SP3 installed, you also installed KB938828.

  You can read here all the things that are included when you install SP3 (including this update), so you shouldn't have to install again.

  If you get the DEP errors, I suspect a third party extension of the Explorer.  If someone offers you make an exception to DEP for Explorer, this is the wrong idea.

  DEP errors occur when XP shuts down an application because she feels threatened by the latter.  XP should never feel threatened by his own substance - like Windows Explorer or Internet Explorer.  If XP gives you an error DEP of one of these applications, something is wrong with them and the best thing to do is to understand what the problem is and fix it (or I guess you can just start to try things and maybe get lucky).

  Also, we are not a 'thing' on your system, what makes blind troubleshooting especially a roll of the dice.

  But, let's see how you go with this idea of clean boot and optimization of the Microsoft Support Engineer and you can check if this may help.

• Windows Explorer crashes repeatedly on startup and cannot choose a restore point?

  Equipped with Vista 64-bit... Had a problem for a while opening now and then records that have videos in them.  I could open other programs (email, etc.), but not the files with the Solution Explorer or Explorer would crash.  Not a big deal and I did have the time to fix it (no online seemed to know anyway).

  Trying to send two videos to two friends via Skype, somehow shortcuts placed got video on my desktop and Explorer crashed.  Whenever he finishes crashing and returns, it crashes again so I can't even get rid of them by removing their or whatever it is.  It crashes so quickly, that you can not even click on one.

  I tried to reboot (har har) and even in safe mode, what happens.  I tried to go to a system restore, but it tells me that the System Restore Wizard is already running when it is obviously not.  I don't really know what I can do at this point, that the only thing that stops it is the cancellation of the application of Solution Explorer, but then I can't access anything that anyone else.  If only I could get the icons on my desktop, I could solve the problem with the videos, but I can't even get to them to get rid of them.

  Please help, I really need to use this PC this week and I tried almost everything I can think of at my disposal.

  The 'failing module' is the kernel32.dll file, which is a Windows file.

  However, the problem can actually be someone else, possibly from third parties, of the file.

  It may be useful to try to capture a dump of user of the explorer.exe crash mode.

  You can configure Windows to create dumps of user mode. First, create a System Restore Point.

  If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
  00, 6 D, 00, 70, 00, 73, 00, 00, 00

  
  After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  More information on the collection of user-mode dumps:

  ("msdn.microsoft.com/en-us/library··· 85) .aspx

• Taskbar crashes often, but everything else works

  My sister has a HP with Windows Vista.  Recently it started to act up.  The taskbard crashes often through all day, but everything that is currently open would continue to operate.  When this happens, she must do ctrl + tab to navigate between applications and browser.  The only way I know how to unlock the taskbar is by pressing ctrl + alt + delete, then esc.  It solves the problem temporarily, but it's really annoying.  At first I thought that his computer has been infected by a virus, so I did a complete system restore, but the problem persists.  Help, please.

  Without guarantees, try this...

  Press Ctrl + Alt + Delete keys together > Task Manager > processes tab > right click on explorer.exe > end process > file > "new task (run...)".
  > Type explorer.exe > OK

  Check the taskbar again. It's still freezing? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Explorer crashes after update requires restart

  Hello. I am running Windows Vista x 64 final. I'm not in the sidebar of pestiferous bug.

  Every time that Windows Update requires a restart, Explorer crashes (no longer) after the reboot. After a few minutes of waiting to explore to start, I click on get something and I got the white box that says something like "this program does not respond, you want to . I kill and, for good measure, I restart Windows.

  The second time I restarts Windows, Explorer loads and works for less than a minute before it crashes again. I have to kill him, and then restart Windows. Then only Explorer does not work with anything approaching reliability.

  I have run chkdsk - checked everything very well. I ran sfc/scannow to find any problems in the file system, but got only standard Sidebar.ini questions (sfcdetails.exe will be in a response to this post). I also runSophos Anti-virus residents; I did a scan of Sophos Anti-virus ; I did a scan ofMalwarebytes Anti-Malware ; I did a scan Spybot Search and Destroy ; I performed aStinger anti-virus scan; I ran Windows malware removal scan. None of them found any viruses.

  This problem occurred regularly since I was the computer. Why Windows Explorer does not hang after a Windows update reboot? How can I solve this problem?

  Hello

  My best guess is that the Sophos has an important role in the problem you are experiencing. That can SpyBot.

  Notice that the bottom line is that "all the files and registry keys listed in the framework of this operation have been
  managed to fix it. So the question of the update is not missing or damaged system files, at least
  not those that CFS can check and correct.

  The only errors exist for settings.ini which is for the sidebar and probably does not
  no effect on the functioning of the sidebar. There's certainly no impact on the question of the update.

  Close the sidebar for that.

  Is there the thing for the settings.ini - run AutoRuns and look at the SideBar Gadget entries - all
  This point is no longer existing files such as temp or uninstalled gadgets or not running? Generally
  those who have "Yellow icons" on the left side and the files/folders will not exist. If so right click on them
  and delete - restart. This may correct the errors that you see.

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  ----------

  Another thing that often correct this problem is to close and start a couple of different gadgets.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Explorer crashes on startup and cannot be restarted

  I have a laptop HP running on Windows 7 64 bit. I have not used in a week. The last thing I did was install shutdown and Windows updates. When I connect I immediately encounter a black screen with a dialog box indicating that "Windows Explorer has stopped working. "A problem caused blocking the program works correctly Windows will close the program and notify you if a solution is available. The only option is to close the program. Another smaller dialog box is in the upper left corner. It is empty and says the settings customized on top. I can still run CTRL ALT DEL and go to the Task Manager. I try to manually start the Explorer, but the same thing happens. I restarted and start in safe mode with network and loads everything correctly. Don't know what is the next step or how to solve. Help, please!

  Thank you!!

  The problem might be this module:

  LoadedModule [50] = C:\Program Files\Synergy\synwinxt.dll

  In SafeMode with network go to the C:\Program Files\Synergy folder and right-click the synwinxt.dll and rename it to synwinxt.old

  Then see if you can start the computer in Normal Mode.

  The error that you are experiencing may be similar to what has been reported in the following link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/c4290bb2-305C-4210-B04B-f086c9824e5a/Explorer-crashes-due-VC-201012-in-Windows-7-ultimate?forum=w8itprogeneral

  In this link, the user has used ShellExView to disable the extension Windows synergy and synergy still worked.