External DVP11 of display, tablet screen turned off?

Similar Questions

• The AT200 tablet screen turns off

  Help...

  I had my AT200 for a little more than 24 hours and the sceen went now empty, but the Tablet is still on, screen is blank, but on and the unit is completely insensitive.

  Can not switch it out... don't know what to do now?

  Really disappointed :-(

  Can someone help, please?

  Thank you

  Hi Catherine,
  This happened to my Tablet too early. But after that in the past few weeks, my Tablet ran completely without this problem occurring again (after installing a few fix, see below). So there is hope.

  Certainly your tablet is at a standstill. A software error has occurred which even turned off the power button.
  There are also no way for a hard reset on the AT200 (like removing the battery).

  You can try in any case to press the longest power button (5-10 seconds) maybe it helps.

  My solution is:
  Let your only Tablet for a few hours. Important: Do not plug the power supply!

  After a few hours (I think that mine took about 12 to 20 h) battery will be (nearly) exhausted, and I hope that the material will turn off the tablet at a standstill to save the battery against damage.

  At any time, you can try the power switch. I have the Tablet is at a standstill should not react. If the Tablet is turned off, the power led should continue for a second, then turns off. (Because of the battery it won't turn)

  Then you can connect the power supply. The power led should go on now, which indicates that the Tablet battery is charged.

  After a few minutes you should be able (I hope) back on the shelf. (Leave the power supply connected)

  It worked for me.

  Now, of course, an Internet connection is present (active Wifi).
  Open the App 'Toshiba Service Station', updates, and then install the hotfix for 3.2.1. (I guess that the Tablet has not already the 4.0? Mine doesn't).

  If you get no reaction against the ignition switch after waiting a longer time. Alternatively, you can connect the power supply for a trial. If the power led lights which can be a good indicator that the Tablet is alive again.

  Good luck!

• Satellite A200 - screen turns off without reason

  I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythings... Although a few times after the restart he still went.

  I tried to upgrade to the last poster of drivers (I have an Nvidia Geforce Graphics card 7300 Go with 128 MB of VRAM)

  Another weird thing, Vista SP1 does not install on my machine. tried to uninstall my Anti virus, but that did not help either one.

  Can anyone shed light on my dark screen?

  Hello!

  You have the same problem on an external monitor?
  I m not sure if it s a display problem, mother or software card

  Do you have what display driver installed? You have downloaded the driver from the Web from Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Satellite A210 - 17L - screen turns off

  Hello people,

  I have a similar problem to [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61255&tstart=15], screen turns off by itself randomly, but backlight remains lit and laptop always seems to work (judging by fan). This started after upgrading Vista to Windows 7 (new installation), there was no problem before. I tried to update the display driver, first ATI Catalyst, then Toshiba official one, the customer pays less often, but still doesn't work, it's nice embarrassing ;) It occurs regardless if the laptop is used or just slowed down and is not caused by overheating or saving energy, also cell is generally connected with mounted battery.

  I have the last opportunity to go and update the BIOS, but I'm in fear of bricking the thing, so he would try as a last resort.

  Any idea guys?

  Thank you

  Hello

  There is an easy way to solve this problem: connect an external monitor and check what happens. If everything is ok on the external monitor installation (Windows) and internal monitor are ok, the problem must be internal monitor itself.

  If it s the monitor itself it s inverter FL, LCD cable or LCD itself. That s is not easy to say on this virtual path for your laptop needs to be checked to an authorized service provider. Guys can make an accurate diagnosis.

• Equium A200 - screen turns off

  Hi, I'm having a problem with my Toshiba laptop, the screen turns off randomly and the computer still seems to work, but when I use a VGA cable to connect to a TV it does not display anything.

  Here are pictures of when it fires
  http://Tinypic.com/r/vr9d7d/7 yellow on the disc tray is turned on
  http://Tinypic.com/r/2d9poya/7 that the front turned on lights and computer sounds like its operation.

  This led me to believe it's a hardware problem, but when I turn on the computer in Mode safe it never turns off. I also got the fixed ups this year because the screen was losing power.

  Can anyone help I can't really afford a new laptop at the moment

  Hi David,

  It's a little confusing, it doesn't always happen when you shut down the computer, or just sometimes?
  What do you do to get rid of this? Always remove the battery and the AC adapter or what exactly?

  I think that it s a hardware malfunction, usually has nothing to do with the software. What you can try is a BIOS update from the official website of Toshiba.

• Satellite A100 - 784 PSAANE - screen turns off automatically

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE with windows visa Home Basic edition.
  Now for 15-20 days I am facing a strange problem. The screen of the laptop emits a sometimes (not necessarily every time) and then when the frequency increases the display turns off automatically!
  Then I must Hibernate or he put laptop to sleep to find again the screen... Seriously, I don't understand the problem.

  Please help me.
  Thanks in advance

  Hi Julie,.

  It sounds as if something is harming your graphics driver causing the display to turn off. If the problem occurs only when you use certain applications or only started after installing a new application you may need to restore your system to a restore point before new applications have been installed. As a test, you can try to start your system in safe mode and see if the problem persists.

  I also recommend that you re-install your graphics drivers to see if it improves the problem.

  Other possibilities are that your graphics chip is a failure or overheating causing this problem in which case you have to return your laptop to a Service approved for the additional diagnostic agent.

  My last thought is that you may have a problem with the inverter FL (the component that provides the lighting of your LCD screen). Check, when the screen turns off, if you can still see a residual image on the screen. If yes then the FL inverter is definitely at fault.

  Kind regards

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Anyway continue Voiceover if the screen turns off?

  Hello world

  I use Voiceover to read eBooks for me, but the voice-over goes out once the auto lock turns off the display.

  Is it possible to do the Voiceover to continue even if the screen turns off?

  Thanks for your help!

  Hi Dionysus17,

  AFAIK the only way to solve this problem is to disable the auto-lock on your iPad. To do this, go to settings > General > lock and from here you can choose when you want to stay for before your locks iPad screen.

  Hope this helps,

  Aaron

• Screen turns off when the Satellite A45-S250 is moved in the direction of less

  Hello.

  I have a satellite A45-S250. I had no previous problem with this machine. However, when the computer is running too long, or it is moved in the slightest way the screen turns off. I don't even have to type very slowly - or I lose the screen.

  But also, as I have said - sometimes I won't even be near the computer and the screen turns off. When I lose the screen if the light shines on it - I can see, it's always VERY fair Sun. Generally, it will come if I use the FN + F5 button.

  I don't know if it is a screen problem or a connection problem. It occurs with increased frequency. Any suggestion would be appreciated.

  Thank you

  Mindylea1

  Hello

  From your description, I assume FL converter is defective and must be replaced. FL inverter is responsible for the background light and the typical symptom for faulty FL inverter is dimming or blinking display.

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.