Dynadock U Display problems on external monitor.

Similar Questions

• Cannot get T500 to display on the external monitor

  Hello
  I'm running Windows 7 on a ThinkPad T500 (type 2082.BSG), and I'm having problems after have recently updated my display on the Lenovo site software (read the list of installed software, I think that the installation of the software that is the cause of the problem is "ThinkPad features video [AMD switchable Graphics (M8x)] for Windows 7 [32/64 bit] ') version 8.752.4 - 101022 a-107489C-Lenovo). Before the update my computer has guessed what display is active (laptop screen or external monitor) and used the active display. For example, when the laptop is docked and the cover closed he used the external monitor. After the update when the laptop is connected and the lid is closed, I can't display on the external monitor. I have to open the lid and use the Fn + F7 to get the display on the external monitor. Can anyone tell me please what settings should I use to get the old behavior.

  Kind regards

  bostjanv

  The previous is an old post, but as there was no response, and I recently solved the problem, I write in case someone else runs into the same problem.

  After having encountered the problem I restored the factory default driver (which does not show the problem). However, lately I received another message to the effect that it is recommended to install Lenovo "Thinkpad video Features (AMD Switchable Graphics...). ...". I installed the software but the problem described in my original message reappeared. However, this time, the software of (the age AMD) had a "driver update" option and my video material is correctly recognized and the correct driver has been downloaded from the AMD website, after which the problem described in my original post disappeared.

  Kind regards

  bostjanv

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal

• Qosmio X 300-problem of external monitor

  Hi all!

  I am the proud owner of a 300-157 x, but I have a problem. I would use my laptop as a desktop workstation and use an external VGA monitor to the output.
  Everything is fine when the operating system (Vista or Ubuntu) is responsible, but I can't figure out how to make the external monitor to view BIOS and POST messages to completely get rid of the internal display.

  Any clue?

  >... I can't understand how the external monitor to view BIOS and POST messages to completely get rid of the internal display.
  AFAIK this option doesn't exist. In General, computer laptop Qosmio is designed as a multimedia mobile gear and games. Of course you can use it with external screen or a TV, but I think that it is not designed to be desktop replacement. For example, professional laptop computers Tecra and Portege that can be used with a docking station to have multiply and different options for use with external display.

  I had X 300 but I ve never used it with external monitor so I can't say with certainty how it works but if I m remembering well this option to disable the laptop computer's display is not available.

  Every time when you want to use your laptop as a desktop replacement you should open it, start it, wait that the OS is fully charged, switch to the external display (FN + F5), and then close the cover.
  I know it's a little annoying, but, more or less, in 2 minutes, you can use your laptop as a desktop replacement, especially if you use an external wireless keyboard.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Satellite A660-1FM - maximum resolution of the display of the external monitor

  Hi all

  Maybe it is (probably) an easy question to answer, but I have a Satellite A660-1FM and want to use it with my external screen Samsung Syncmaster (forgot model). I got a HDMI-> DVI - D adapter and everything is going well, but here's my question:

  The page of specifications of toshiba for my laptop (http://uk.computers.toshiba-europe.com/innovation/product/Satellite-A660-1FM/1096013/toshibaShop/false/) shows a capacity of external resolution of:
  Maximum resolution: 2 048 x 1 536
  Max refresh rate: 100 Hz
  Resolution No interlaced with the maximum refresh rate: 1920 x 1 200

  But I get what I call resolution HDMI standard (no wonder, I guess) when connected HDMI-> DVI - D to my external monitor. I have already run this monitor on my desk at highest resolution of 1080 p, so the monitor is capable.
  Wondering what I'm missing here, or is that a matter of graphics card specification is more than possible to the output of the laptop?

  Thanks for any help
  Andy

  Hi Khaled,

  What is the native screen resolution of your external display?
  Can you connect your laptop and monitor with HDMI cable only why you need an adapter?

  To be honest I don't understand your question. If you already have the Full HD screen resolution why do you need more?

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Satellite L500: internal display is dead - external monitor is ok

  I haven't used my L500 for about 6 weeks
  I tried to start it yesterday only to find "dead".

  I charged the battery overnight and I tried again this morning to find that my screen does not work.
  I plugged an external display that works, then I tried FN + F5 to switch between screens.

  The pc now only works in safe mode

  Help

  Hello

  It looks like a malfunction of the internal display.

  If the external monitor works properly, then I guess the graphics chip is ok too.

  In my opinion, there must be something wrong with the internal display.

  What do you think?

• HP Pavilion dv6-7029wm: BIOS display on an external monitor

  Hello

  The screen of my laptop has been broken for quite awhile now and I tried to find a way to be able to view the BIOS on an external monitor.

  I tried pressing f2 and f8, f10 or esc on startup and try using f4 to toggle the display without result.

  As a side note, when I press f10 if I try to press keys f later my computer makes a high-pitched beep, I don't know if this means anything but I feel like it is worth noting. I use an external keyboard, so I don't have a fn key, if all that matters.

  Finally, I tried to disconnect the front lcd screen but my attempts to disassemble my laptop in the past have not exactly well and I do not trust myself without ruining things more far.

  What I can do about it, or am I out of luck?

  I'm afraid you're out of luck when it comes to BIOS on external monitor display. The switch of the F4 does that once the computer is started. Same goes for making a recovery system - several have posted asking how to see recovery on external monitor... screens cannot be done.

  Your Service and Maintenance Guide should help with reeplacing lcd.

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5272094/manuals

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• HP Pavilion 14-v140la: pilot HDMI to connect to the display of the external monitor

  I have in my drivers Control Panel devices does not:

  1. the PCI driver

  2. when I want to connect a external monitor he sent me a message thar I have to re install driver or change my video card.

  Works perfectly, using another computer with monitr even please help.

  Hello

  Please try the following ' AMD high definition (HD) Graphics Driver:

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69161.exe

  Kind regards.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Dynadock U10 display problems

  Hello

  There seems to be a conflict between the Dynadock and Apple usb drivers. As soon as I connect my iPhone to the USB port on my laptop or the Dynadock the monitor which is connected to the dynadock constantly turns black with a slow refresh of the content of the screen the mouse is placed on the screen. This happens every few minutes while the iPhone is connected.

  I downloaded the latest drivers and software and currently 5.4 on a computer laptop 64 bit Windows 7. Is that what someone else has similar problems or can anyone suggest a workaround/fix other solution do not connect the phone?

  Thank you.

  Colin.

  Exciting announcement.
  Have you noticed this behavior with any other external USB device when you connect it to Dynadock U10?

• Dynadock U Series showing not external monitor

  I have a series of Dynadock U that will not show an image on my monitor Dell1905FP. I use the VGA connection between the dynadock and the monitor and a usb connection between the dynadock and my laptop samsung QX310 with a NVIDIA GEFORCE 310 M 512 MB graphics card. I tried to configure the display settings through the on-board Intel HD Graphics and the dedicated graphics, without success.

  When I snaps, he acknowledges that a monitor is attached and the power off standby, but it fails to display anything on the screen. I tried the display of the function of switching without success as well.

  I have no problems when connecting this monitor directly to the laptop.

  Did you install software that you have with your Dynadock?
  What operating system do you use on your laptop?