Failed installation of Windows XP on the laptop replacement

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail.

  Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.

  Not this problem when I go to Internet Explorer.

  Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.

• need to install windows 7 but the laptop has initially windows 10

  Hello

  I need to install windows 7 but the laptop has initially windows 10.

  I'm not very satisfied with windows 10 because we need to separately purchase MS office.

  can someone guide me pls the process...

  Option 1:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  Option 2: (recommended)

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  Buy Microsoft Office

  Office of 2016 for the House, students and professionals - Microsoft Store

• I want to delete windows 7 but I do not have the installation disk that came with the laptop

  I had a friend who has installed its own version of windows 7, however a month later his request for the code, which I did not, all want to remove and put windows vista back on but do not have the original installation disc

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• delete the partition after a failed installation of windows 10

  Hello world

  How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

  So I made a failure (several) attempts to install windows 10 on my new iMAC.

  I could download an ISO of windows and start the bootcamp assistant.

  In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

  I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

  Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

  Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

  I was unable to delete the Mac partition.

  Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

  However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

  Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

  So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

  any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

  concerning

  Evan

  1. your iMac has a Fusion drive?

  2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

  3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

  4 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Installation of Windows 7 on the second laptop

  first post so please bear with me.

  my Dell Studio 1558 running windows-7 recently deceased.  the motherboard somehow got fried.  I pulled the laptop hard disk on and recycled.  a friend gave me his old inspiron from dell (under Vista).  It is slow and freezes a lot when surfing the internet.

  recently, I remembered that I have a "reinstallation DVD' for windows 7 that came with my (now deceased) Studio 1558.

  I was wondering if I can replace (legally) of Vista with Windows 7?  I want to do a clean install, wipe everything off the Inspiron portable computer, and load Windows-7.

  I ran a diagnosis and the Inspiron can run Windows 7.

  I suppose that if I try to install windows-7, I asked for some kind of activation key (which I did not).  as my old laptop is dead and buried, is there someone or somewhere I can reach out where they can give me activation key because I really only run a version of the OS?

  one last note: I still have the old hard disk of death studio 1558 - I could exploit that somehow?

  hope I posted this in the right forum, thank you

  LouNYC

  Legally, the key was put on a sticker at the bottom of your Studio 1558 and is approved only for this laptop.  If you still had the key, could you transfer it on your computer 'new '? technically, Yes, but with Microsoft EULA changing all the time I don't know if its "legal", I had a key on an old computer and I transferred to a newer computer when the old man died and everything was fine.  The Microsoft Police did not stop for me or anything.

  Long story short the biggest problem is anyway, that if you trashed the laptop with the key on there is no way to recover it.

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Satellite 1800-700 - f3d failed installation of Windows me

  Hello
  I really need help.
  I'm trying to reinstall Windows ME on my S1800. It formats the computer and when the installation is gona start. It stops just before she even coms to 1% and it failure f3d know?

  I use the CD I got whit the computer when we bought it many years ago... What I am doing wrong?
  My kids went to use the laptop so I'd love some help here...

  THX

  > I am trying to reinstall Windows ME on my S1800. It formats the computer and when the installation is gona start. It stops just before she even coms to 1% and it failure f3d know?

  You n t do anything wrong.
  Maybe your CD is scratched or there is a problem with your HARD drive and so the installation can not produced.
  In this case, you would not be able to copy the contents of the CD to the HARD drive.

  However, you should check if you could start other discs.
  For example a live Linux CD or other window (Win XP) etc.

• Failed installation of Windows Genuine Advantage Notification (KB949810)

  After many months of Windows & Office updates there is failure of the last update, installation of Windows Genuine Advantage Notification (KB949810) - OGA notice 2.0.0048.0. Since of attempts by Windows updates to install OGA 2.0.0048.0 reviews all the time, but it fails with one "Installation failed" message in the error log.

  I already tried to install notice of OGA 2.0.0048.1.0 by folloing the instruction provided here:
  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/thread/3f9f11fa-b4c8-436C-9c32-d696dbc8cf15

  In addition, I tried running manual setup, after I disabled the scanner in real-time of the Norman Virus Control. No other AV tool is installed.

  KB949810 is an optional update. As long as you have been able to validate your installation of Office by clicking on the button post Office on thishttp://www.microsoft.com/genuine/page, do not hesitate to hide KB949810.

  HOW to hide an update or restore a hidden Update [good for Win7 & Vista]
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of Windows 7 for their laptop computer Inspiron

  Hello... Someone at - it with Windows 8 / 8.1 laptop been able to install Windows 7? If so, would you care to share how? Thank you

  I'm tired now. I have try this installation of all possible ways and it can not be installed. I even went to try and see if my disc of windows 7 is originally by installing windows on my desktop pc, no problems with the slice. If the drive is good. Any ways I give up and I am returning this unit in MS and get a full refund. Now, I need to figure out how to do a factory reset. Thank you

• Hard disk failed to keep windows 7 for the new hard drive or SSD

  Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

  I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

  I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

  Specifications:

  Laptop: TOSHIBA Satellite A660

  OS: Windows 7 Home Premium

  (Let me know if you need more details)

  Thanks for any help.

  If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

  https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

  After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

  You will need 4 blank DVDs.

• Trying to clean installation of Windows XP, but the installation maintains suspended to 24%.

  Im trying to make a clean instalation and followed all the instructions. However it says Setup is formatting, but it seems not move past of 24%. His taped summer to 24% for the last 45 minutes. I'm using the windows xp disk came with the laptop. I am a novice and do only to prove a point to her husband. If there is anyone out there with advice, I would be extremely grateful.

  Thank you very much

  original title: the Setup program formats, stuck at 24%

  This might be useful:

  http://www.pcuser.com.au/pcuser/HS2.nsf/Web/3D2F91493F7B80D5CA256EA80038C9A7

  Tom Ferguson

• white background for hours during the installation of windows 7 from the dvd hp system recovery

  I own a dv7 - 3186cl and recently bought a new hard drive to replace the damaged one.  When I go to install windows 7 from the recovery of the system DVD purchased by hp, it loads a blank screen background image and stays there.

  I had kept it slowed down on it for about 6 hours now.  The mouse still moves, but nothing has changed.

  I ran Diagnostics on the computer before this point and he passed all the tests.

  Someone help me please... I have no idea what to do

  Please reinitate the recovery process. Please remove all other devices connected to the laptop. Here is the link that has the steps:

  http://support.HP.com/us-en/document/c01895783

• Windows XP on the laptop, but saying Windows 7 Build 7?

  My laptop runs Windows XP Edition family, but at the bottom right of the screen is, Windows 7 Build 7600 this copy of Windows is not genuine.
  the laptop never had other copies of Windows is installed, this message just came at the start of the laptop, one morning, help any with this please.

  This should tell us what is happening...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.