Failed to load during the disconnection frontend.dll

Similar Questions

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list.

  I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?

  Hello

  Yes, it can be in hidden files that may cause by the virus.

  I also suggest you to see link and check.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Flight Simulator panels and add on models fails to load on the main screen

  Original title: problem FSX and windows

  Some of the panels such as the F-18 and add it on the templates may not appear or do not come up on top of the screen when picked up. I just reinstalled windows and do not know what happened during the installation. I'm not sure if all the main files are missing for something wasn't going to install it. I run FSX with acceleration pack and is a 32-bit microsoft windows xp.

  Hi United869,
   
  Try these steps and check the result.
  Step 1: Download and install the drivers for Windows XP-compatible video card.
  a. visit the video card or the system manufacturer's Web site to download the driver.
  b. install the driver and restart the computer for the changes to take effect.
  c. start the game and check the difference.
   
  Step 2: Adjust display settings
  a. right click on the desktop, click on properties.
  b. click on the settings tab and adjust the screen resolution at best.
  c. click ok to apply the changes.
   
  Step 3: If the problem persists, reduce the game to the minimum settings. To do this, follow these steps:
  a. start the game.
  b. click on settings.
  c. click Reset defaults.
   
  See Troubleshooting of problems in Flight Simulator X graphics
  Step 4: Check the Windows updates to see if there are updates available for flight simulator
  a. see using Windows Update for Windows XP

  See Solutions for the Flight Simulator Centre

  Visit our Microsoft answers feedback Forum and let us know what you think.

• On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

  I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

  Original title: a registry file

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• Photoshop CS3 fails to load into the old user profile.

  Original title: Photoshop CS3

  I try to install Photoshop CS3 with windows 7 Professional, but the computer tells me it is not compatible, but after creating a profile, it loaded ok, but it does not always load profile original I have on my PC, any ideas?

  Hi Mike,.

  As Photoshop CS3 to load in the new profile, this clearly indicates it as corruption of profile.

  Profile may get corrupted for various reasons like virus etc.

  You can analyze your computer by using the Microsoft safety scanner and check if the officers correctly else try steps according to the link to transfer all the files from one account to the other.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Answer if you need help with Windows, and we will be happy to help.

• Loading during the DB query message

  I have an output of the query with 9000 + files in there that i'm view 200 per hour. and I'm using cfFlush to display a message to wait while he s of loading. (which I can't figure how to get rid from loading)
  
  My question is (and I guess that there is not), but is it possible to know the status of the query to display a progress bar. or y at - it a cfflush means the output so that it will begin to populate all interviewing yet? It takes about a minute for the page to display, and I'm trying to prevent users to reload the page in the workplace application.
  
  
  Thank you.
  

  Javascript code in the onload event handler in thetag removes the message "loading" from view.

  The point in which the page has finished loading in the browser is an event called "load". The value of the "onload" attribute in thetag is the event handler for the load event. The event handler is the Javascript code that simply makes the invisible "Loading" message.

  Note that the "Loading" message is inside a

  block and that the

  block is positioned absolutely. This is important. When a block element (the

  block in this case) is positioned absolutely, it is removed from the normal document flow. This means that all output, what follows is not placed after him but under it. (You can also force it to appear on the top of the block of absolute positioning by specifying the z axis). The effect is that the

  block and the other output seem to be in separate layers. You don't have to place the

  block, but if you do not, the space it occupies will remain on the page, even after you set the visibility to "Hidden". If the

  is not absolutely positioned, but you want the space it occupies to 'close' when the message is deleted, you can set the display property to "none" instead of setting the 'hidden' visibility property