Failure alarm [Collector] store ACS5.1 (DCACSBGLR, TacacsAccounting)

Similar Questions

• A better description for "alarm data store capacity.

  I tried to find a description for the "ability of the data store alarm." In the list of the alarms of the Victoria Cross, there is this: default alarm that goes off when the capacity status changes to support the data store or the volumes.

  I guess I don't understand what "State of capacity for the volume" means exactly/specifically. Can someone explain?

  Hello

  Welcome to the communities.

  Please find the details at the bottom of link with an example.

  If you did not follow the.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2006858

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.solutions.doc_50%2FGUID-067B62CC-5EB7-42C0-BA30-A3FF0F4916AB.html

  Take care!

• alarm data store (if the data store is 90% full)

  I would like to receive an alarm email if my data stores are 90% full.

  any help would be appreciated

  First, we will eliminate any potential problems with the SW forum and the copy that you made.

  I have attached the script, see if that also returns an empty mail.

  To ensure that we use the same VITK can you do a Get-VIToolkitVersion

  Made this comeback

  VI Toolkit Version
  -----
  VMware VI Toolkit for Windows 1.5 build 142961
  

  And the fact that the return values

  Get-Datastore | Select Name, Type, CapacityMB, FreeSpaceMB
  

• 5.2 Cisco ACS system alarm [Collector]

  Hello

  I have a problem with my ACS 5.2 General reports, if anyone can help would be great.

  We have two ACS 5.2 primary and secondary. Both work fine, but have an alarm to the General reporting system.

  list '(too long) value '.

  I have attached the screenshot of this error.

  At this point, we use GANYMEDE device of authentication only, no RADIUS. These servers are sync both conf are the same.

  Don't know what exacly causing this system error, can anyone help on this.

  Thank you

  David

  This has been observed when an accounting packet is received on the device of the ACS and lacks the attirbute class. However it is a cosmetic issue and there is no bug on this. If you want to have someone look at this and addressed if please collect newspapers of debugging at the level of DURATION and mgmt-acsview newspapers and open a service request on when the problem occurred.

  You can do SSH to GBA, then issue the command acs-config, connection with web references, and then publish a newspaper of the show debugging, if all levels are set to warn, then issue-journal of debug runtime level perform a debugging, debugging acsview mgmt-debug log level.

  Repeat for both servers, once the error is present, please download a package of support.

  Please open a service with this information request and we will be more than happy to help.

  Thank you

  Tarik Admani

• VM HA (VM monitoring - response to the failure of data store)

  Hello

  2 ESXi hosts connected to a shared storage. We HA enabled with the default settings and "monitoring VM = Disabled.

  In the case where one of the ESXi hosts running VM1 lost access to Datastore1 that hosts VM1, HA the hang and restart this computer on the other host?

  If this isn't the case, it will be when the virtual machine monitoring is enabled? and if we have more than 10 guests, how does know where the relative data store is still active, I mean on what host?

  Kind regards

  Monitoring of virtual machine will restart a virtual machine if HA detects more VMtools beating heart, but also the network IO and storage to the virtual machine.

  If a host loses access to a data store that HA is concerned this depends on which version of vSphere is used and how to access that is lost (ODA or PDL - see details here VMware KB: loss of the device (PDL) Permanent and All - paths - Down (APD) in vSphere 5.x ).  If running vSphere 6, HA now has a feature (VM component Protection) which will restart all virtual machines affected by ODA or PDL on a host that is not affected. If using earlier versions of vSphere even with VM followed the active user intervention will be necessary since VM monitoring only restarts the virtual machine (and not on a new host) (vSphere5.1 storage improvements & #8211;) Part 4: All roads down (APD). CormacHogan.com).

  Does that answer your questions?

• Can not put to day/download apps, stuck on the waiting

  My air ipad 2 and iphone 5 s will not update/download applications. It is stuck on the waiting. I tried to reset my phone and plug it into my computer and tried to download it from there, but nothing happened. I tried checking the software updates as well, but it just says: "unable to verify the update.  Any ideas on how to solve this problem?

  Hello

  The problem is perhaps a failure on iTunes Store.

  Depending on where you live, there is a fault in the iTunes Store.

  Check the status of iTunes in other countries.

  

• Re: Screen full of fingerprints on laptop brand new

  Hello

  I bought a new laptop in a shop well known when I opened the screen was full of fingerprints, so I exchanged it for the same model and 1 was the same and it looked like it had been wiped down with a damp cloth and 1 other had this problem is the failure of the stores or Toshibas.

  Thank you

  I m long enough on this forum but I think you're the first person who says something like that.

  On this virtual path, it is not easy to say what the problem is here, but I would like to know if your laptop was well packed and never to be opened before.

• RemoteApp on t610/WES8

  Hello

  I need to configure RemoteApp connections and office on a t610/WES8.  It works fine on the Admin account, but on behalf of "User" I have disable UWF, RADC configuration, then re-enable UWF or are there exclusions from file/registry that I have to configure?

  How can I send connections RemoteApps and RDP on metro/Office of the 'User' from RADC account is not available in the control panel for this account?

  Thank you

  ZP.

  All remote applications work fine when logged in as an administrator.

  I tried to make 'The user' administrator account and I tried to configure local Group Policy objects to display all items, or to show precisely the RemoteApp settings but it still does not appear in the Panel when logged in as 'user '.

  As long as administrator, I created a shortcut on the desktop for RemoteApp settings and copied from the user's desktop.  I was then able to launch and configure RemoteApp like the user and applications and the RDP connection appear in the subway, but I get a license error when launching a remote applications ("the remote computer disconnected the session because of an error in the licensing protocol... »).  I tried to disable UAC but no change.

  I then logged on as Admin and exported / remove the "HKLM\Software\Microsoft\MSLicensing" key and restarted.  Now logged in as 'User' I get the error, "the remote session has been disconneted because the failure of creating store license with access denied... "Please run with elevated privileges remote desktop client '-which I can't do as the user (don't right click and run as admin) even with the" user account ", defined as an administrator.

  I logged in as "Administrator" and launched a remote applications.  When I logged as a 'User' I was able to run all my remote apps and the RDP session with no problems.

  TL; DR:

  -Capture an image your thin client first
  -Disable the UWF > restart
  -Log in as 'Administrator' > configure RemoteApp connections and the Control Panel Desktop

  -Right click and create shortcut for RemoteApp connections and office > copy this shortcut to C:\Users\User\Desktop

  Export/remove "HKLM\Software\Microsoft\MSLicensing."
  -Log in as 'User' and launch/configure RemoteApp and remote from the Office desktop

  -Remove connections RemoteApp and desktop from the desktop shortcut
  -Log in as 'Administrator' and launch a remote applications
  -Log in as 'User' and check the work of remote applications successfully

  -Log in as 'Administrator' and reactivate the UWF

  (UPDATE: instead of delete the registry key, just give 'users' control group "MSLicensing")

  Even if it's got the remote apps not working for me, I do not particularly like this as a 'solution '.  I prefer to see more control on the 'User' account and specify what the account and does not have access to in the control panel.  Any other ideas?

  Thank you

  ZP.

• Create the circuit of the STS - V between 2 15454 SONET with CE100T

  Hi all

  I have a problem that I can't find documentation for.

  I create an ethernet point to point circuit between 2 15454 SONET with CLC ver 8.5 knots.  The circuit will carry you a VLAN not routed between switches, Cisco 4948 in 2 data centers.  I use CE100T-8 cards which the ethernet 100/full value, checked the Frother.  The POS is configured with a GFP - F frame and 32-bit CRC.  Type of circuit is a single STS - V STS to 50Mbit of bandwidth.

  The switch ports are configured as access ports on the VIRTUAL LAN set to 100/full.  At the end of B, the connection between the switch and the port of THIS is a straight through cable.  End is a crossover.  switch ports are configured as such:

  switchport access vlan 512

  switchport mode access

  switchport nonegotiate

  Speed 100

  full duplex

  Problem I have is that end A "Transport Layer failure" alarm to end and end B has the 'Carrier loss on the LAN' alarm near end.  No end shows an ethernet connection

  Wiring has been tested, I've tried other ports on the CE and have deleted and recreated the circuit board.

  What simple step/setting I'm missing?

  Thank you in advance,

  Jim Bowen

  [email protected] / * /.

  Jim,

  It seems that your problem is by your side B that has the loss of carrier on the LAN. The failure of Transport layer will be on the end node in these cases.

  You mentioned that the end B is a straight through cable from the switch to the CE card but the side is cross. The first thing you can try is to put a cable on the side B as well because it looks like the side of A working very well (doesn't have the loss of carrier on LAN).

  I don't remember if cards of IT have an option to hardcode the speed and duplex but if they can only so if the suggestion of cable does not work. If this does not work, you can try setting autonegotiation on switch and the map of THIS to see if it solves your problem. Once the loss of the carrier and LAN to clear alarm you should be up and running.

  Also, I can't remember if the EC supports the loopback test, but if you can try try to put a Terminal loop on the B side (it's optical to) your end should appear and your switch should appear/maximum looping. I would like to know how things work out for you. Looks like you're almost there a few tweaks should get running.

  Thank you.

  Ryan

• Failed to sync Mac blackBerry Smartphones... Help!

  I downloaded the Director of office for mac that was sunk a few surprising... worked weeks ago.  Then randomly started having synchronization problems.  First of all, it wouldn't put my Ical events on my phone, then she ecaple my contacts in my contact list on my phone (multiple entries of the same number/person), I kept getting a sync error, try new message when I want to synchronize.

  Now, I got a:"persistent store of migration failed, lack of source managed object model. "message before I get the sync error, try again.  I have no contacts on my phone, tried to use a backup, and it does not work.  That's happened?  Help, please!

  Ovens of Hello and welcome to the forums!

  Check out this article that should help you!

  KB19682 - error message "Failure persistent Migration store" is received when opening BlackBerry Desktop Manager

• Problem of his Palm t5 (research)

  Hello!

  Two days ago my t5 palm stopped play sounds via the internal speaker (his helmet seems to be ok). Posts on this forum say that it is a hardware problem (micro-switch is stuck in a headphone jack). At least in my case, I need a more complex explanation:

  -The internal speaker stopped working without any interference in the headphones (I do not plug headphones into the Palm). Most people have this problem after disconnecting the headset.

  -J' was able to set my speakers to life by simply plugging in the AC adapter / CC. President Ping with a usual sound and worked for a few hours, that dies again.

  -At least twice, I could hear sounds after a hard reset. But only until I tried to launch any application. Then he was silent again.

  -As for now, I hear 'clicks' of the speaker when I connect my T5 to hotsync cable and press the hotsync button. Still more - if I have press the hotsync button while the cable is not plugged into the USB port - and wait 30 to 40 seconds, I see a box with the message "hotsync failure" alarm and can hear the sound of the mono speaker alarm Palm. So it is again being mute.

  With a background in electronics, I opened the unit and checked the sound elements visible:

  -L' speaker is OK, the measured resistance is recommended on the speaker (7.8 vs 8.0 ohm)

  -Points of motherboard are OK

  -There is a voltage V 1.68 on the two points vs. the ground, but no difference in voltage between the pads.

  -5-pin headset plug seems to be OK. Microswitch pads (two pads on a basis of a Jack) have no resistance measured when the socket is empty and are disconnected when headphones are plugged in.

  -J' have tried to short-circuit buffers with external cable - but no effect dip switch - sound is always redirected to the helmet.

  -J' tried to connect the internal speaker to the headphone channel. It works, but the rate of release of palm is unacceptable (headphones are devices to 30 ohms, and I believe that internal speaker is connected through some elements of energy saving).

  I'm completely perplexed with my problem of his palm. This may not be a pure hardware problem as he plays sometimes a few sounds via mono speaker. But if this is a problem in a software - how in hell, he survives device resets?

  Any ideas?

  Hello!

  Indeed, the problem was multiple connector. It seems that cable flat keyboard connection and connector multiple base with a main card had isolation deteriorated between some of his sons and a surface of steel on the base. Now, I remember that some time ago my Palm was irregularly to hot-sync mode even when the hot sync cable was not plugged.

  After that I put a piece of insulation between the metal base and a flat cable (which covers the hard edge of the base metal) mono speaker returned to life. Please put this in a FAQ or KB if possible.

  It would be nice for palm-engineers (if palm still has some) to build a utility program that allows the user to select the device audio default substitution of the system. See cool head for treo on sourceforge (does not work on palm t-series).

  Thank you!

  Message relates to: Tungsten T5

• Had a host down with the vCops server. It queue messaging?

  We had to restart a crowd last night that had vcops on this subject. Is he queued emails he sent: I do not think that I should have gotten, but do not know. Or he picks up just where it would do when it comes back online.

  If vC Ops doesn't, may not get new data to deal with, so there is no new e-mail to the queue. However, when vC Ops comes back online, it will make data collection and alert off the coast of these data collected... for example, a host loses storage and vC Ops back upward on another host... vC Ops will pick up this event host on the next data collections and the kickoff of a failure alarm type.

  If there was a blip in the vC services Ops, you can get an alarm of the administrative system, but if it's a full reboot may not generate an alarm.

• ESXi 4.1 host / bad disk / IBM 3650 material

  Hi all

  I have an esxi 4.1 with defective drive host, it is an IBM 3650 material. I lost all the virtual machines in one of the drive due to bad hard drive.

  I have set "alarm" to "material state changed" send e-mails in the category 'host '.

  But I have not received e-mail.

  What is the best way to deal with this?

  Hello

  This kind of event should be already controlled by the vcenter failure alarm "unable to connect to the storage.

  You should check the 'Actions' of this alarm tab, configure it to send an email if this alert occurs.

  Check this vmware KB, maybe helps you:

  VMware KB: Creation of storage storage redundancy path connectivity alarms / lost in vCenter Server

  Best regards

  Pablo

• "Home CPU/memory/connection" (host) changes from green to gray, then gray to green?

  Hey everybody,

  I'm trying to track down a problem with one of my two hosts. My Cluster (2 guests in HA/vMotion) is pretty basic, but runs a lot of VM that requires an availability of 100% (as if we want to accept less ). This is the result I get every two weeks. It's a bit concerning to know that for some reason a node is abandoned, or is it same stall? I see no vMotion alerts or the tasks in that time. Nothing seems to break. Uptime on each virtual computer and the node in question leads me to believe that nothing is really wrong, but it can be worse than what I think. I mean he's only 17 seconds... how bad could it be, right?

  I'm assuming "Host memory usage", "host CPU usage", 'Swap host service rate console', etc. go from green to gray, then gray green means that it is not a resource problem, just an indicator that it is "grayed out" because there no report or an interruption of the connection.

  I guess I am wondering if it is network related, associated hardware partner, vsphere host or something I can't even think. The host disconnects for 7 seconds and no quick vMotioning can't. I think 30 seconds is the rule in front of him vMotions? I mean, I had rather not vMotion, if I can avoid it.

  Whatever it is, what do you think?

  Alarm 'Hosting service console swap rate' on (HOSTNAME) changed from grey to green
  Info
  06/07/2011 19:53:35
  (HOSTNAME)

  Alarm "Host memory using" on (HOSTNAME) changed from grey to green
  Info
  06/07/2011 19:53:35
  (HOSTNAME)

  'Use of the UC to host' alarm on (HOSTNAME) changed from grey to green
  Info
  06/07/2011 19:53:35
  (HOSTNAME)

  Alarm 'Host fell' on (HOSTNAME) sent by e-mail to (ADDRESS);
  Info
  06/07/2011 19:53:26
  (HOSTNAME)

  Alarm 'Host fell' on (HOSTNAME) triggered an action
  Info
  06/07/2011 19:53:26
  (HOSTNAME)

  'Host fell' alarm on (HOSTNAME) has changed from yellow to green
  Info
  06/07/2011 19:53:26
  (HOSTNAME)

  Alarm 'Connection and power supply home State' on (HOSTNAME) changed from red to green
  Info
  06/07/2011 19:53:26
  (HOSTNAME)

  A connection established
  Info
  06/07/2011 19:53:25
  (HOSTNAME)

  A connection established
  Info
  06/07/2011 19:53:25
  (HOSTNAME)

  Alarm 'Connection and power host State' on (HOSTNAME) sent by e-mail to (ADDRESS);
  Info
  06/07/2011 19:53:20
  (HOSTNAME)

  "Failed to connect to host" alarm: sent an SNMP trap for the entity (HOSTNAME)
  Info
  06/07/2011 19:53:20
  (HOSTNAME)

  'The host connection failure' on (HOSTNAME) alarm action
  Info
  06/07/2011 19:53:20
  (HOSTNAME)

  "The host connection failure" alarm on (HOSTNAME) changed from gray to gray
  Info
  06/07/2011 19:53:20
  (HOSTNAME)

  'Hosting service console swap rate' alarm on (HOSTNAME) changes from green to grey
  Info
  06/07/2011 19:53:19
  (HOSTNAME)

  Alarm "Host memory using" on (HOSTNAME) changes from green to grey
  Info
  06/07/2011 19:53:19
  (HOSTNAME)

  'Use of the UC to host' alarm on (HOSTNAME) changes from green to grey
  Info
  06/07/2011 19:53:19
  (HOSTNAME)

  Alarm 'Host fell' on (HOSTNAME) changes from green to yellow
  Info
  06/07/2011 19:53:19

  
  (HOSTNAME)

  'Connection and power host State' on (HOSTNAME) alarm action
  Info
  06/07/2011 19:53:19
  (HOSTNAME)

  Alarm 'Connection and power supply home State' on (HOSTNAME) goes from green to red
  Info
  06/07/2011 19:53:19
  (HOSTNAME)

  Host is not responding
  error
  06/07/2011 19:53:18
  (HOSTNAME)

  My memory, I cannot keep records for a long time. Last year, I think that I have seen this problem and it was a bug. There is also a patch for it. It was a BUG where the way every now and then, the confidence in me it was no problem at all in the perspective of the environment.

  I don't remember the article or the revision of patch has this connection, but you may need to check the kb.vmware.com to see if you can find.

• unmonitor storage of specific data warehouses connectivirty

  Hello

  We conduct the following isue: we do backpups Exchange using SnapManager for Exchange NetApp. Once the task of backup, the backup is verified by the mounting of a LUN on the server. The problem with this is that, after the audit, the LUN is disconnected and that the alarm is set on the vCenter that a data store has lost connectivity.

  What we would like is to avoid alerts on this specific LUN (it is always LUN0) used only to verify the backup.

  We have tried to set an alarm (storage connectivity), but it also detects this logic unit number that we do not want to detect.

  Thank you in advanced for your comments.

  Best regards

  Miguel

  I see.  In this case, I believe you can use the new functionality of object datastore in vSphere.  You can change where you place your alarm data store.  In other words, go to your view of data stores, create a folder, call followed computer data warehouses and add your alarm data store it.  Next, move all data storage you want to look in this folder.  All new data store that is created will be outside of this folder and will not be subject to this alarm.

  -KjB