failure of windows updates changes in recovery

Similar Questions

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• I'm getting 'Failure Configuring Windows Updates, changes of restoration' by updating windows.

  It was the first time that I am trying to update my laptop of Lenovo G500s which is come with 8 windows pre installed, before installing the updates, I have restored the laptop if you default factory using Lenovo a recovery key. While the updates are being installed I received a message 'Fail configuration Windows updates reverting changes'. It lasted for an hour. When I tried to install updates again the same message appeared. My laptop came pre-installed with Nitro Pdf 8 and Mcafee Internet Security, so I have even uninstalled them, I also ran Mcafee Consumer Product Removal Tool. But the problem with windows update remained. I then ran the convenience store update Windows that sets these two problems:

  fix windows update fixed the database and repair misconfigured update windows components, but this solves nothing. Later I discovered that although the resolution of update problems show that the problems have been solved but convenience store running immediately shows again the same problems.

  So this time I ran again the recovery system, and immediately after the system recovery windows update of convenience store that showed the problems mentioned above two updates of windows.

  Is it so that means the recovery partition itself contains other problems that my problem would have been solved, what do I do to fix this?

  Take a look on: http://support.microsoft.com/kb/947821/en-us

  ... use the Deployment Image Servicing and Management (DISM) Inbox. Then, install the update or Windows service pack again...

• Failure of windows updated y580 configuration

  I get the message "failure of windows updates changes to return" when I try to update my computer, can someone please help with this? How can I make sure that updates are going through?

  ' afternoon.

  Please check if KB2647753 is in your list of updates to install. If so, install everything first, everything about him with no other update selected. do a required restart. Once installed successfully, all others must succeed. It is a known Microsoft issue.

  Please let us know if it works for you.

  Kind regards.

• Try to update, but that out of failure configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  my laptop is s200e asus PC with the built in language unique window 8.

  My problem is when I wan upgrade to 8.1 of the shop window, it say I need to update the update of the window.

  but the problem occurs when I updated, and then "failure of Windows updates. Restoration of the changes. Do not turn off your computer. »

  but the return is seem endless, coz I wait for a whole day... .but it will be not just finish.

  I can do nothing but reset it back to the factory.

  I can't update 8.1 store window without updating the window.

  You do not add features to upgrade 8 > 8.1

  That's the Pro and Media Center that do not need another product key and that are no longer available.

  And the creation of media for 8.1 works; I just checked it a minute ago.

  See you soon.

• Failed to update Windows 8 (KB2756872, KB2768703), happens to 30% then get error "failure Configuring Windows updated. Changes in return ".

  I installed 2 updates.

  I installed both of them using the standalone installer which.
  First, I checked the updates using Windows updates and then installer of stand-alone download from the link more information if I can use this update later.

  Here are the 2 updates I try to install:
  1 Windows8-RT-KB2756872 - x 64
  2 Windows8-RT-KB2768703 - x 64

  I rebooted my system after installing the updates.
  Windows configures updates up to about 30% and the system gets stopped and restarted.
  Then he went it 100% and all of a sudden, I got a message something like:
  "Failure of Windows updated. Changes in return ".
  It is just returned

  Here are all the logs files (CBS.log, WindowsUpdate.log, WindowsUpdate (1) .log)
  http://bobdn.com/files/logs.zip

  Please tell me how can I get the update installed successfully.

  I finally solved my problem with the update kb2756872 ("update failed, returning of changes"). It was caused by the reserved partition Windows is not set to active (I dual boot using GRUB). Go to the Control Panel-> administrative tools control->-> computer managementdisk management and make sure that the reserved partition is marked 'Active'. This also solves many other problems I experienced as not able to activate Windows startup settings.

• Updates to Windows 8 - "Configuration of the Windows updates, changes in restoration failure"

  Hello

  Recently I finally got my laptop back from repairs after 6 weeks. Now, it is in a 'clean' State (aka factory settins).

  I wanted to get to 8.1 Windows as soon as possible, but for this I need to be on the latest version of Windows 8.

  So I then try to run "Windows Update" and let it install all updates recommended. He manages to download all updates,

  and then he tries to configure these. About 98% or 99%, it gives the following message:

  'Configuration of the Windows updates, changes back failure'

  It then goes in an infinite loop constantly, he ran for hours and hours without having passed this screen.

  So far, the only solution is to reset it to factory settings, which brings me to the point before that I try to update, so it is not move me.

  I've tried so far, but no luck what follows:

  • http://support.Microsoft.com/kb/949358/en-us
  • http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/16219e5c-564b-4310-9f68-c9d595bb4cbe?page=1
  • http://support.Microsoft.com/kb/971058

  None of them has worked so far.

  To be clear:

  It is an OEM license. This doesn't mean no DISC, nor any ISO/Exe could work that they do not accept the product key.

  Many other people have the same problem.

  Please, I'm at a loss to date.

  Yours Sincerely,

  Leon

  Hi all

  Seems that I myself have found a potential workaround.

  Install only the KB2871389 allowed me to grab the download of Windows the Windows store 8.1.

  Then, I could install Windows 8.1 without a hitch and it normally seems using Windows Updater runs from there on.

  It is not yet a waterproof solution to water / final of 100%, but it seems to work for me.

  I hope this will help someone else with the same problem!

  Yours Sincerely,

  Leon

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Failure configuring windows updates current portable window7

  When Windows tries to update my computer I get the message "failure configuration Windows updates revenant changes...» "Sometimes it sucks seed for update and computer works normally, but in 10 minutes. It asks me to update windows again and if not postponed the repetitions of the cycle.  The computer is an HP with Windows 7 Home Preimum and a 64-bit operating system.

  Hello

  Please refer to this link and check if that helps.

  https://support.Microsoft.com/en-us/KB/949358

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• 8024402C in the window update 8 error recovery and cant open in apps store...

  8024402C in the window update 8 error recovery and cant open in apps store...

  I got this error for 2 months, even after trying thousands of methods... including registry too
  then I realized that the problem is in my cuz IPS (Internet Service Provider), it could not find the server
  configure your own server-to-server of google
  for example, 8.8.8.8

  go to RUN
  Enter "ncpa.cpl".

  Right-click on the network you use for internet
  Go to the properties
  do not click on setting ipv4
  again go in properties
  Click "use the following DNS server addresses.
  Enter the preferred DNS server

  8.8.8.8

  than others

  8.8.4.4

  YOU'RE DONE!

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.