Failure to burn a CD

Similar Questions

• Failure to burn Photos to cd/DVD to cd/dvd

  Work on MacMini (mid-2010) using OX 10.11.5 & trying to place hundreds of photos on cd/dvd. Created the album in the Photos App & placed pictures in the album and record folder on the desktop. Machine load to burn the album on the disk in the Finder menu.  Place the dvd + R (4.7 GB) in the optical drive. Message received 1: the disc can't be burned because an unexpected error occurred (error Ox8002006E). I tried with the cd - rw (700 MB) and the message received 2: communication error (error code Ox8002022). Suggestions?

  Which means no pictures - once you export photos (menu, file == > export) to a Photos folder is out of the loop: it's either a problem of system (ask in the forum for your operating system) or a hardware problem (ask your material in the forum)

  Can you life of the photos in the folder to burn using the finder? You can everything using the optical drive and the DVD burn disc R +?

  LN

• problem in writing 8.5 GB DVD only

  I have Dell inspiron. N5010, Intel core i3, 3 GB of ram, drive 8 x DVD writer SATA L633J TSST. My problem is that I can't burn only 8.5 GB DVD.

  Previously, I had problem in writing any od the CD or the DVD then I changed the DVD burner then I started using Nero 7, which gave a mistake nullified address block, and then I started using Roxio. Roxio has worked well for CD and 4.7 GB DVD, but when I tried to burn it used to give the error, then I uninstalled and tried burning with WIndows image writer I could write 'ONLY LOCAL MADE' 8.5 GB DVD but when I tried to write Supermedium / Sony, he was in error 0xC0AA301, then I calle dell d service they updated ware closed and off Roxio in "MSconfig" but still the same problem , then they asked again to change the DVD writer (for the second time), and then I started using Roxio, I could burn 6 DVD and I was failure to burn 4 DVD and it gave error.
  CSA of sense: 02:04
  ASCQ: 08 (command 35),
  PX.dll:4.24.14.0
  PxAFS.dll:4.24.14.0
  pxdrv.dll:1.02.61 A
   
  PxMas.dll:4.24.14.0
  PxSFS.dll:4.24.14.0
  PxWAVE.dll:4.24.14.0,
  pxwma.dll: 1,0, 0, 3

  Hello DrSunilgajanurkp,

  Thanks for your post.  Review your other threads and try the troubleshooting steps that they contained and let us know the results.

  FYI, you can see your son by clicking on the name of your profile.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-hardware/l-i-cant-burn-DVD-85gb-only/e16f5a8c-6380-E011-9b4b-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-while-burning-DVD-85-GB-only/a2826df7-427A-E011-9b4b-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-pictures/cant-write-to-85-GB-DVD/c1afb936-c37a-E011-9b4b-68b599b31bf5

  See you soon

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some of the Menus Adobe Premiere element cause DVD burning failures?

  Some of the Adobe Menus cause DVD burning failures?   What should have been a project of 10 minutes for a small 4 minute video took hours as burning DVDs stopped at 4% and then gave a message of "something has prevented completion in progress DVD burning".  I could finally solve it down for the Menu template, and when an audio clip looping has been added.  The Menu was built for an audio clip loop, but when I removed it the fine burned DVD.

  Since my last post, I checked that my drivers are up to date.   Driver updates were made to the display card Intel HD 4600 Graphics and Chipset Intel 8 series/C220 family SATA AHCI Controller.

  I created a new project and changed the flow of work to remove the check mark from selection to 'Add Menu markers automatically for me'.   When the menu has been selected and displayed, only the main Menu was to confirm that I didn't remove the Menu scenes.   At this point, I finished the remaining workflow and tried to burn on DVD using the stated parameters previously.   However, it had the same failed result.

  I went then to the path of Premiere Elements menu bar: Edit > Preferences > General

  The option "use hardware acceleration (works on Intel HD Graphics 2000 and higher)" has been selected.  I unchecked this option and clicked on the OK"" button.   I then tried to burn DVD with DVD NTSC_Widescreen_Dolby preset.

  Success!   The DVD was burned and confirmed to work in older DVD player (AVCHD burning earlier disk did not work in older DVD player, but worked in a new Blu - Ray player).

  It seems that the "use hardware acceleration" option preferred default was the problem in the prevention of burning DVDs.

  A.T. Romano thanks for your quick response and help to solve this problem.

• error code 0 x 205 Burn failure insert the blank cd or dvd

  I get this error code when you try to burn discs by default factory, under States details value General Exception was too large or too small for a type of int32 error code 517 DVD disc I tried 4 different DVD including - brands / +, I tried to format first mistake even differently each time. I know that I carved these when pc was new (it is 2 + years now) but I can not find them after the move. What this means and I can fix. I also did some windows updates and tried to find more recent drivers without success? Help, please!

  Hi TechnoDoug56,

  ·         What burning software do you use?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  You can run the below mentioned Fixit who automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media and then check out the question.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• Dell Inspirson 546 s burned DVD will not play, error 'error code 740 failure of process of creation ".

  code 740 burn movie but will not play on player please help

  I have a Dell Inspirson 546 s I burned movies much but for a reason, it will still burn, but will not play on a standalone dvd player but I'm working on my computer please help me. For I have not understand the computer. When it's getting burn the creation of said process has no error 740 code.

  You are posting in the wrong Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• PE9 burn failure at 95% causes the whole computer crash

  Hi - I hope someone can help.

  I'm puttig clips set of mobile phones and various other devices in the first year of the life of babies, it includes audio tracks on the line of the soundtrack as well as the audio and video on track 1. I have also included a pan & zoom slide show of images and the total length is approximately 1hr20mins.

  I don't know what the problem is, but after that the disc menus (there are 4) were all coded, the program gets to 95% and then hangs, but is not just down to the program, in fact, it blocks my whole system by which I can't use my mouse or keyboard to close anything.

  Last week the system worked perfectly and I tried to save the entire movie as an mpeg on my computer that worked perfectly, but there is something preventing the burning at the end.

  I use a Dell XPS 17 with processor intel core i5, drives (C and D) with 1 TB of total RAM. I use a Nvidia graphics card and have RealTek HD audio. (not sure if you need this or if there are good things to tell you!)

  Help, please!

  You probably have a number of questions which are an overload of the program. It is also possible that you don't have enough clean, freshly defragmented space on your drives C and D. Even if these drives are huge, fragmentation to prevent the Premiere Elements entering the contiguous space he needs. You work a) an exceptionally huge for a DVD video (DVD can contain about 70 minutes of video), b) you may be using unnecessary large photos (see below) that can stifle the program and c) you say not where your video is coming, but Premiere Elements must work much harder on the video that is not miniDV, HDV or AVCHD - these are all combining in a collapse of the program.

  First of all, when you set up your Premiere Elements project, including project settings have you selected? You have made this setting corresponds precisely to your video footage? If so, you should see no red line above the clips in your timeline before add them effects. This is the case in your project?

  Second, have you ensured that your photos are not larger than 1000 x 750 pixels of size? Photos directly from a device using photo (some of which can be several times video resolution) are the main cause of starter program.

  You have made your timeline (press enter) whenever you see red lines above your clips on the timeline? If your timeline is rendered (at the Tower of red green lines) your program will perform more effectively and you will have less problems with transcoding your DVD. But even this does not however resolve the questions listed above.

• Control of start burn failure is p2pp

  Hi, I have tried to reset my laptop to factory setting and used 3 recovery CD that came with my laptop. After the recovery is complete. I get an error saying P2PP BurnBoot verification failed.

  I am not able to connect to windowns and my phone is idel lying. Can you please help me get this resolved.

  Having just suffered from this problem on two of my own laptops, it seems that the way to solve it is documented in this thread:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/restoration-failed-P2PP-burnboot-check/m-p/2562175#M133274

  In short: startup in the BIOS loading the laptop by pressing F10 - change the date of 2013 for 2012 and then try to run the recovery again. When it is finished successfully and loads in Windows, you must then install the patch/update detailed in the thread above to make sure that you can perform successful recoveries in the future.

  Hope that helps.

• Pavilion g602305tx: portable optical drive failure

  When I insert a disc windows says pls insert the disc and then automatically eject the tray.

  -DVD burner gets power, but not reads any disk.hp g6 2305tx-like pavilion, I need to replace the drive or it's a motherboard problem?

  where can I buy original hp spare parts in bangladesh?

  Use uefi HP PC Hardware Diagnostics utility to test the optical drive. My HP Omen 15 product ready to version 5.7.2.0 installed. You should maybe download and update your version of HP PC Hardware Diagnostics to get one that will test the optical drive. www.hp.com/go/techcenter/PCDiags

  Press the power button and then press the ESC key to access the boot menu. Now, press the F2 key to enter the diagnosis. Click the tests of components and then click on the optical drive. If the test shows the drive as failure you know it's time to replace it.

  Do a web search on Google or Bing with "hp pavilion g6-2305tx optical drive replacement"as key words to find a seller online.

• HP 15 Notebook PC: iTunes error 4450 - can't burn CDs

  I bought this laptop 2 months ago. It has all the latest updates installed. I bought the laptop computer mainly to house all my files itunes, images and videos. I managed to transfer all the data to the laptop, but my first attempt to burn a CD from itunes, I got an "unknown error 4450.  I then tried burning the files manually on a drive using the Cyberlink burning software which is installed on the laptop and it also did not work.  It starts as it will burn the disc, runs for 30 seconds and then stops and opens drive poster "Audio CD - #0xEB020BED - an unknown error has been found.

  Because I could not manually burn a cd, I suppose that the problem is in the laptop and is not iTunes.  It seems that something is wrong, but I don't know how to solve this problem.  Because the laptop is new, a system restore probably will not solve anything, especially if it's a failure of construction plant.  If I can't burn CDs on this unit, he was buying at all.

  Please notify.

  For those seeking the resolution of a similar error, it was a setting in the default programs in the laptop. The WIndows Disk Image burner is by default to read mp4 files. Once I changed that, it works great now in iTunes and Power2Go.

• External CD burner does not recognize blank CD

  I have a new CD/DVD of Memorex burner that plays very well the prerecorded CD, but when I put in a blank CD - it seems that the blank CD is not recognized.  I've been reviewing newspaper and I see no evidence of an error.  The default current behavior when you insert a blank CD should be to open iTunes.  The focus to Itunes, but nothing else happens.  In addition, the CD does not appear in the Finder or on the desktop.  Once the CD is inserted into the optical drive, the unit eject button works like.  (It works well with prerecorded CD)  The only way to eject a blank CD's either reboot the computer or open the disk utility program and eject it from there.  Disk utility seems to be the only application that knows the blank CD - although he pointed out that the capacity is 0 KB and is unitialized, and partition map and the Smart function are indicated as 'not supported '. I tried with two different brands of CDR and get the same problem.

  Note that I have this problem on two new Imacs. The first is a machine of retina 27 "with 16 GB of RAM and hard drive with more than 2 TB of space remaining.  The other machine is an iMac 21 non-retinienne "with 8 GB of RAM and about 500 GB left on the hard drive.  Both machines are running El Capitan.

  It is the 2nd optical drive Memorex who gave me this problem.  I returned the 1st under warranty and has just received the replacement by mail unit this morning.  I contacted the technical support Apple, which were very nice. They took me through a SMC reset, but this has no effect.  Apart from them, they had no indication as to what was causing the problem.  I thought that I would try to write to you, geniuses.  Any ideas?  Thanks in advance.

  -david

  Contact Memorex. I think that you have to go back and buy something else that actually works with a Mac. 2 units in a row with the same failure seems unlikely. It is more likely that they are simple not compatible.

• Burned DVD - Equium A60 playback

  Hi guys, I was wondering if someone can help me. I have an Equium A60-692 with a Pioneer DVR-K13A CD-ROM drive. The current problem I have is that whenever I insert a DVD that was previously burned, not only by my pc, but others that the CD-ROM drive is unable to read. DVD, that I created in the past that worked very well also stopped play. All I get is the orange led flashing first and then rest it perminently on resulting in a failure in the dvd playback. The player plays original DVD movie very well and plays also any form of cd. Do you think the reader is endangered or is there a setting that has been changed? Any help on this would be greatly apreciated.

  Best regards Richard

  Hello

  It's not easy to say why it of not possible to read the burning DVD.
  You log out of engraving? Sometimes the medium cannot be read because the sessions of burning are not closed. But this is only possible if you burn CD/DVD several times.
  The second possibility could me not supported way. You must use different media.
  However try to remove you drive the Device Manager and reboot the device. The operating system should recognize the drive again. Well maybe this procedure will solve this problem.

• A60-155 dvd multi burner no longer works correctly

  don't think I've had this laptop for a month yet. the dvd multi drive worked fine, but now it will play only DVDS but not CDs of any kind-it just read more or if she fails to pick up what is cd, it just turns and makes rattling noises. How can I get to recognize the CD and CD-Roms again?
  I tried to uninstall it and now the computer knows it's there, but the shortcut in my computer icon has disappeared, how can I get it back?

  Hello

  What shortcut you mean exactly? It is very strange that, shortly after, the material has this kind of function of failure. You did some changes or something that can be the reason for this? You can burn all types of CD?

  In my opinion, you should try to reinstall the OS using the recovery CD. If there is the same problem again, it may be a defect in the material.

• Failure of inverter/backlight HDX

  The LCD screen on my HDX X 18-1200EO (FU794EA) died at the age of his period of warranty more than nine months. I understand from my research, the most likely cause of death is a failure of the inverter or backlight failure.
  
  What I want to know is:

  1. The TDK TBD512NR ups would be the correct replacement for the LCD 18.4 "? Some sites call a UPS 16 "...
  2. Is it possible to tell the inverter failure after a backlight failure without actually replacing the inverter?
  3. Should I do more troubleshooting before you buy a new inverter?

  Some of the symptoms:

  • The image is displayed on an external monitor.
  • I can see the image on the laptop LCD when I point a flashlight at it.
  • Other components in the display cover (the logo LED, wireless antennas) work.
  • Sometimes the backlight turns on for a few milliseconds when I toggle the external video output with Fn + F4.
  • The backlight turns on for a few milliseconds so that I open or close the lid (when the lid is open to 20 to 30 degrees).
  • There is no sign of failure before it goes black display.

  What I tried:

  • To remove the battery and the AC adapter / CC and hold power for more than 30 seconds.
  • To start with the cover of the display of different angles (from 20 degrees to 120 degrees).
  • To find obvious OS or driver conflicts.
  • However, I do not have to update the BIOS or all drivers.

  By the way, I am running Vista Home Premium 64-bit.
  
  Thank you
  
  P

  From what you described, the inverter is the culprit, but there is no real way to find out until you replace the drive. However, this is the cheapest part, this is where to start.

  If the backlight is burned, then the entire screen will be replaced. There are suppliers on eBay that sell just the backlight, with the inverter also, but the lights aren't supposed to go out and very often the screen will be damaged if you try to get him out.

  http://shop.eBay.com/i.html?_nkw=HP+HDX+18+inverter & _sacat = 0 & _odkw = HP + HDX + 18 & _osacat = 0 & _trksid = p3286. C0. M270. L1313

  Part number, TDK TBD512NR seems to be the right one for the United Kingdom.

  http://www.pchub.com/UPH/laptop/43-40556-11187/TDK-TBD512NR-LCD-inverter.html

  Here's some video for the HDX 18 on how to get home, it's a big job, then you can consider having a store to do so.

  http://h20574.www2.HP.com/results.htm?SID=3769212 & MEID = 3EFDAD77-28EC-4232-A7BA-839C2823F059

  You will need to reconnect you access the page, give it a minute to load.

  Start with the coverage of the speaker in the left column and continue your way through the videos until you get to the inverter.

  The logo HP LCD on the back of the cover no has nothing to do with the inverter or the backlight, incidentally.

  Do not touch the BIOS, it will not help in this case.