Fan Poweredge R530

Similar Questions

• Reference Dell poweredge r530 - increase the disk space

  Hello

  We currently have a Dell Server poweredge R530, with installed 5 hot swappable drives with RAID 5 configured. I need to increase disk space for our virtual machines, bought an x 2 extra 1.2 TB SAS drives to install. What is the correct process to add 2 new readers to the table and increase the space available in the 2012 R2 windows server? Could someone sanity check process below please:

  1. install the 2 new drives while the server is powered and operating normally. (What I have to install 1 player and wait a while, or two disks can be installed directly after the other?)

  2. go in dell iDRAC and confirm the visibility of 2 new readers.

  3. wait until the readers successfully have been added to the State through iDRAC Tracker

  4. go in the management of the storage within the 2012 R2 server to allocate new space for the virtual machine partitions.

  Is more correct? It feels like I'm missing an essential step, it cannot be that simple that it allocate the additional storage space on a live production server?

  Any advice appreciated

  Thank you

  1. the two drives can be added at the same time.

  2 iDRAC is not the best way to do it. Unless this is your only access to the server, use OMSA leave within the OS.

  3. the process is not automatic. Once readers show up in a State of PREPARATION, you will need to go to OMSA, PERC, storage, virtual disks and select Reconfigure in the drop-down list of tasks available for RAID 5. (In fact make the statement reconfigures / expansion was the 'crucial step' you left on your list of ;).))

  4. Yes.

  Are your 1.2 to existing disks SAS drives?

• PowerEdge R530 - expand Raid 5 by adding disks

  I have a R530 PowerEdge with Perc H330 mini with currently 3, 300GB sas hard drives configured as a virtual disk.  VMWare ESXi 6 is installed with a couple of running virtual machines and I'm out of room.  I installed a Supplement 3 of the exact same hard drives and wants to expand the virtual disk with 2 of the discs and the other as a spare drive.  Using OMSA I put the hot spare, however before you reconfigure the virtual disk, let me know if I'm doing it correctly.

  Within the OMSA.

  (1) select my virtual drive, select "reconfigure" and run

  (2) (check two additional disks to add to the virtual disk, press to continue (step 1 of 3))

  (3) raid level default switch to Raid-0 for RAID-5 current and desired and press continue (step 2 of 3)

  (4) check the settings and click Finish (step 3 of 3)

  I can do this without closing to the right of my VM?  This will not destroy my data this?  I have backup, but would prefer not to have to restore.

  Thanks to confirm or point out my mistakes.

  Yes, it is intended to make online and is non-destructive.

• Fan Poweredge 2900 [MS]

  Buongiorno,

  MI servirebbe UN preventivo per una fan (fan 3 of the TR e rotta) by server it Poweredge 2900.

  SE necessario posso mandarvi in the service tag it privato.

  Grazie.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Management fan PowerEdge R610 on debian

  Hello

  I have this server with Dell OpenManage packages installed, R610 srvadmin!--

  Now... the server is incredibly STRONG because of the cooling system and regardless of the preset of the tha, I choose the BIOS (Maximum, OS or application Active performance) coolers are always + 8000 RPM.

  I've been Googling all day to see if I can manage it but no luck, when I try to set the value using the tool of OpenManage cli I get:

  chassis root@test:~# omconfig fans index = 0 warnthresh = default
  Error! Fan threshold setting unavailable for default index: 0.

  And that's how fans are looking like now:

  root@test:~# omreport chassis fans
  Fan probes Information

  Fan redundancy
  The State of redundancy: full

  List of probe
  Index: 0
  Status: Ok
  Name of the probe: FAN MOD 1 system card has RPM
  Reading: 9840 RPM
  Warning threshold: [n/a]
  Maximum alert threshold: [n/a]
  Minimum threshold of failure: 1920 RPM
  Maximum failure threshold: [n/a]

  Index: 1
  Status: Ok
  Name of the probe: System FAN 2 card has MOD RPM
  Reading: 9840 RPM
  Warning threshold: [n/a]
  Maximum alert threshold: [n/a]
  Minimum threshold of failure: 1920 RPM
  Maximum failure threshold: [n/a]

  Index: 2
  Status: Ok
  Name of the probe: System FAN MOD 3A RPM card
  Reading: 9720 RPM
  Warning threshold: [n/a]
  Maximum alert threshold: [n/a]
  Minimum threshold of failure: 1920 RPM
  Maximum failure threshold: [n/a]

  .. And so on, all the same.

  Please, I'm completely lost, if I can't handle this with dell OpenManage tool, then what?

  Thank you

  I'm not expert EP but IIRC, OpenManage allows you simply to see what fans and to manage notification settings when fans behave outside of their speed designated. In other words, you can set how fast you will be informed of an issue or how fast the server will be stopped automatically - nothing more - IIRC.

  I'm not too sure how fast a ' normal PE R610 turns her fans, but all depends on what is installed inside the frame, load CPU and ambient temperature. If these details are set out, maybe someone can indicate if your fan speeds are 'normal' for your R610 or if you have a h/w flaw that should be addressed.

  In fact, Dell has designed the EP cooling strategy based on their vision of how their machines should be used (in the cooled server room) and based on the guarantee that they provide (years). As a result, Dell provides no tools or methods to manage the logic of the operation of the installed equipment with the speed of the fan which operates between with temperature sensors. This logic is in the BIOS/BMC, and this is a no go area for owners, you can not play with these predefined curves/settings. BIOS and BMC firmware updates can also help to calm your machine if Dell has improved/changed the logic...

  That being said, some have found their BMC/BIOS of piracy and the slowest fans workaround in their old machines not supported, see this page of the project and this project page for some insight on what might be involved if you want to go this route not supported...

• FANS - Poweredge R310 [MS]

  Buongiorno,

  I like to buy fans of nr 3 by mio server it PoweredgeR310.

  Could mandarmi UN preventivo?.

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• DASCache crashed the volume

  Hello

  We use SanDisk DASCache on our new PowerEdge R530 to accelerate a RAID5 Volume using two SSDs forming a cache SSD RAID 1. Last night, around 5 o ' clock a.m., cache became suddenly unavailable, leaving the volume accelerated in an unreachable state. This volume, we welcomed three virtual servers, among them our primary DC, so it was a real critical incident. As we have been unable to get a useful support from DELL, SanDisk, the only opportunity we saw was to unlock and reformat the volume and then restore the virtual machines of our backup weekly. The servers are now up, but we are still busy cleaning up the mess. For the moment, we have disabled SanDisk DASCache.

  Does anyone has done similar experiences with SANDisk DASCache in PowerEdge servers? DASCache 1.1.1 version number suggests that the product would not be in the State of reliability which would be desirable for production environments.

  Thanks for your comments and responses.

  Bernd

  OK, we got comments from Dell. Source of the disaster seems to be a communication problem between the PERC raid controller and the SSD by Lite-on which, under certain conditions, translates as the controller of the two SSD power off. DAS Cache somehow this notice and takes the cache offline, without further notice. There is an update of the firmware for the PERC controller, which, according to DELL, could prevent the problem is recurring. An another firmware for the Lite-ON SSD firmware update is scheduled to be released in April 2015. We decided to let the software SanDisk DasCache disabled until the two firmware updates are available and installed.

• Dell PowerEdge T130 Fan question

  Hello

  We just got 2 x PowerEdge T130s. Both work very well until we add a low-power GPU card to the machine (it takes the exit HDMI).

  Now once they get after starting the CPU and case fan the shot at full speed and do not back down regardless of the load of the system.

  Any ideas?

  Install the Dell OpenManage BMC utility that contains the IPMI environment. See the link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=YF64X

  Launch of the shell and run the following commands.

  ipmitool.exe - I lanplus - U root Pei calvin h 0 x 30 0 x 30 vintage 0 x 01 0x00

  ipmitool.exe - I lanplus - U root Pei h calvin gross 0 x 30 30 x 0 0 x 02 0xff 0 x 46

• PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

  Buongiorno just back slab holiday ho gradually he nostro Server poweredge r510 e mi sono venuti fuori questi 2 If sul piccolo show, da explain che fan sulla quale ho error tranquillamente gira, a questo punto ho tried a the fan sulla scambiare porta nella quale mi dava error con una accanto my error viene rilevato sempre su quella porta della mainboard , entering sull' web interfaccia di configurazione del Server noto che quella fan viene segnalata con Velocità uguale has 0 e con error Reed to reach che gira tranquillamente mentre ventole sono senza error ed altre a Velocità normal ovvero 4560 RPM tranne una che viaggia al doppio della Velocità.

  Domanda e ORA: come posso risolvere questo problema? è a modo di risolverlo tramite software bios o o devo send it server per una maintenance?

  avrei urgent need di assistenza in quanto it server deve essere da, l'eventuale telephone number da cars 3425721234

  Grazie in pre-empted speaking saluti

  Buongiorno, is all the ventole girano correctly, provi a clear I connect dalla I drac.

  succesvamente esegua UN reset della stessa to idrac, is no risolve, server it spenga rimuova the side e tenga it looping di accensione be by 20 secondi.

  Ricolleghi it tutto e riaccenda.

  CI sono posisbilita che good it problema rientri.

• Fan sostitutiva Poweredge 1900

  Salve,

  If e una di UN nostro Server Poweredge 1900 fan rotta (serial number: FKLWM3J), could stuffed UN preventivo by a prodotto di ricambio?

  It would be preventivo da mandare a: [email protected]

  By the spedizione:
  1 nome società: Colorit Srl
  2. address: Via Tempio Pausania 4
  3 cities: Torino
  4 Provincia: to
  5 cap: 10137
  6 name/last name/number phone/e-mail del referent in loco: Alessandro Grasso / 011 311 94 96 / [email protected]

  With the fatturazione
  1 nome società: Colorit srl
  2. address: Via Tempio Pausania 4
  3 cities: Torino
  4 Provincia: to
  5 cap: 10137
  6 name/last name/number phone/e-mail del referent in loco: Alessandro Grasso / 011 311 94 96 / [email protected]
  7 partita IVA IT08060180018

  Grazie,

  Buona day

  .

• PowerEdge 2900 Fans full speed, amber LCD but no text

  I have a Poweredge 2900 which powered on and boots. But fans come to full speed and the front LCD is amber and speechless. He pitied the Remote Access Controller initialization failure. It starts up fine otherwise fine.

  I tried updating the BIOS to 2.7.0 and disconnect all power and remove the CMOS battery. But I can't always clearly the problem.

  What can I do about it?

  Photos here

  http://i.imgur.com/Fh1aDp1.jpg

  http://i.imgur.com/Q3LStpK.jpg

  Hello.

  Speed of the fans of the system is governed by the DRAC/BMC. Attempt to update the BMC http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=C6H4X Else do a soft

  reset the DRAC.

• PowerEdge R230 fans speed & do not respond

  Hi all

  I have a new server with a weird behavior, which I'm not sure.

  Once we started the server, the fan speed is high then seattled to about 8000 RPM. Is this normal for R230 fan at its idle speed?

  We tried to install VMWare ESXi, but server will no response. We also tried installing normal Windows 7 as a test if it's a server problem or problem installing ESXi USB, same no response to the initial installation screen.

  BIOS Version 1.1.4
  Firmware Version 2.22.22.22

  Thanks Josh, we him had all solved.

  Number 1: Fan at idling speed is about 50% speed.

  BIOS: 1.1.4 Firmware: 2.22.22.22, controller of life cycle: 2.22.22.22

  Resolution: update BIOS to 1.2.5 & update firmware for 2.30.30.30

  ****************************************

  , 2nd edition: Server freeze on ESXi 5.1U3 (Dell version) installation screen.

  Resolution: PowerEdge R230 supports ESXi 5.5 and above, earlier versions are not supported. We have installed ESXi 6.0U2 (Dell version) and everything went smoothly.

• Dell PowerEdge Fans always runs in full speed

  Hello

  I have a problem with a Dell Poweredge 2900 server witht. The server is still running the fans at full speed.

  I tried to update the latest version of the bios and the firmware for environmentally sound management, but the problem is not resolved.

  Dell OpenManage shows only a single error, said of the intrusion into the chassis, casing is open, but case is closed properly. I think that the sensor is bad, I try to look for the switch, but I can't.

  Please let me know where is the switch of intrusion of the chassis on this server, or how to disable.

  Thank you

  As suggested by Theflash1932, the intrusion switch may be damaged and located on the Bay of housing Center fan. It cannot be replaced as one of its components. See the image below.

  

  It is replaceable like a Bay of housing of Dell part number: NF078

• DELL PowerEdge R730 (Gen 13) always 100% fan (16000 RPM +)

  Hello

  I have a brand new R730 DELL.  Since the time I first started the box, the beginning of fans out to what I consider normal speed, halfway through start, then for as long as the box is enabled, the fans are strong and spinning to their maximum rate 100% or about 16000 RPM.  There are 6 fans in this area.

  I have updated the BIOS to the latest firmware 2.2.25, I also updated the firmware from LifeCycleController to the last 2.40.40.40.

  Dell technician has been there twice to replace 1) all motherboard (motherboard) and the other 2) maps PCI riser (who had the button intrusion).

  The server fans still spin 100%.

  I did:

  -the flea power drain

  -the IPMI command to turn off cooling for PCIe

  -remove all memory but 1 chip in A1 and deleted 8 SSDS.

  Turning always to 100%.

  When you look at the installation of the fan to the iDRAC, I can't even set a custom value because the beach is stuck at 100-100%.

  There is no additional PCI or PCIe cards installed.

  Does anyone have an idea what is happening here.  It does not seem right that this fan run at 100% all the time.

  Looking at the configuration of the system, the server was shipped with 2 processors Intel Xeon E5-2689 V4. These processors have additional thermal requirements and so RPM fans' will operate 100% as a trade off. Based on this information, the fans run according to the needs.

• Request price diretto FAN by server PowerEdge R210 II

  Buongiorno,

  Abbiamo indivuato UN guasto due ventole del Server PowerEdge R210 II (service tag: 7K556X1) da noi injected.

  Richiediamo one ' offer by the price di n.2 ventole by suddetto server there.

  5s a gentile riscontro vostro.

  Saluti

  Buongiorno, the sto contattando by mail.