Features of site-survey AP 1131

Similar Questions

• Comparison of the AP for site survey

  Hi guys,.

  Don't know if this is a repost, haven't seen my old post go up again...

  I had to do a site survey in the coming months, and I was wondering what is the difference in making the survey with a different access point which must be installed. When I say different, its not going to be a too different AP!

  The client goes with of 1242 once the investigation is complete, but I 1231 and 1130's use to the investigation.

  I looked at records and didn't see too much difference between the 3 models, when using standard antennas, they will use in the end.

  Would that be acceptable?

  Thanks in advance

  Mike

  For a simple field measurement, everything boils down to three things; the antenna, the output of the transmitter and the receiver sensitivity and selectivity.

  Of the three, most likely to be Variant are the receiver... especially because the radio components may vary and be better (yay technology!) or worse (f ' n beancounters do things cheaper construction).

  Sensitivity improved without improving the selectivity would be a bad thing (like having a great amplifier open... noise gets amplified too). Selectivity is the ability of a receiver to discern the desired signal and interfering noise-type spectrum which also includes other issuers.

  As long as these three essential characteristics are substantially similar, the results of the investigation of the site will be substantially similar.

  Even if the features are not the same, if you know what they are, you can calculate the compensation, adjust the equipment or add additional "fudge factor."

  IMO, given the State of the hardware of today, if the antennas are the same (type and substantially similar Smith maps - radiation diagrams), you will get a valid poll.

  Good luck

  Scott

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• I lost my Norton log-in feature and feature secure site for downloading the new and not very good in my opinion, the version of Mozilla Firefox, and I want features of theses back then how I get back them?

  I downloaded and installed the latest version of MF, but now I've lost my Norton funtions in the bar under the address bar.
  Safe site and log in. I want my features Norton back please so what should I do to get this?
  I am not happy to lose these features and am not at all satisfied with your so-called improvements and wished that you had left things alone, everything worked fine before.
  Help me get back my Norton features.

  Symantec has released updates for Norton 360 and Norton Internet Security to make them compatible with Firefox 4, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894

• Design options for the site survey

  I'm looking to set up a vote on a site section. The results of this survey will be displayed on a separate page, unprecedented for the customer.

  2 questions:

  (a) srite got responses from the survey in a PHP file and my results out of this base file page?

  (b) it would be slower and more effective approach?

  Record server behavior insert to insert voting poll in the database, and then use the query to display the results. No hand-holding, with examples of code sorry but you should have enough to go. Basically to have a DB configuration with auto-increment id, vote_id, user_ip, answer_1, answer_2, answer3 etc, then having insert record SB to insert data in the database. After that, use a query (recordset) to get the results and display on the page. You will need to use a little math php if you want to display the percentages of votes, etc., but this is the basic idea. http://PHP.NET has much info and http://mysql.com is also an informative site. user_ip is in the comic book to prevent users to vote several times from the same IP address, or you could use via the session variable user_id and don't allow users to record in the opportunity to vote to restrict logged users to be able to vote more than once in a poll.

• [ASA] VPN Clustering maximum features and Site to Site

  I have a few questions about VPN Clustering with an ASA.

  1. how many devices can be in a cluster?

  2. I know that it is not possible to use the Site to Site VPN in a cluster, but near my cluster remote access VPN set a tunnel from Site to Site, which is not load balanced and terminated directly at the device of the cluster support?

  To answer your questions: -.

  (1) the max is 10 devices in a cluster

  (2) Yes...

  "Load balancing is effective only on remote sessions initiated with the Cisco VPN Client (version 3.0 and later), the material Cisco VPN 3002 (version 3.5 and later) Client or the ASA 5505 functioning as a simple customer VPN." All other customers, including LAN-to-LAN connections, can connect to a safety device on which load balancing is enabled, but cannot participate in the load balancing. »

  HTH.

• Coverting 2602 light to stand alone (for the site survey)

  Hello

  I have a conversion problem 2602 light on its own.  It will not start to standalone IOS.  The following is what I did.

  AP: value 10.0.0.1 IP_ADDR

  AP: the value of 255.255.255.0 subnet mask

  AP: tftp_init

  AP: ether_init

  AP: flash_init

  AP: tar - suchftp://10.0.0.5/ap3g2-k9w7-tar.152-2.JA.tar flash t:

  extraction begins

  After the extraction process.

  AP: set BOOT flash;/ap3g2-k9w7-tar.152-2.JA

  AP: start

  Please see attached figure of the AP.

  Thnaks

  If you have another image in flash you must remove it and try again to load the stand-alone image

  When you remove the capwap image file, you must delete each file inside this folder, and then delete

  empty the folder as a result using the rmdir command.

  -----------------------------------------------------------------------------------------------------

  Please don't forget to rate correct answers

• I have Ad Block, but a site keeps popping up. 'S called it focusAd. When I go to the block, he wants to block the site I'm. How can I get rid of him?

  I do surveys. When I go to the survey site, focusAd appears on the page and I have to type "Continue" to move forward. When I try to block focusAds, he wants to block the site survey, not focusAds. I even if I "chose" to it, apparently not. Thanks, Judy

  Ads can be inserted by bad Add-ons. Because these are often installed outdoors for Firefox, I suggest starting here:

  Open the Control Panel, uninstall a program. Click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Out as much garbage as possible here.

  Then, in Firefox, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Finally, you can "absorb" remain problems with the scanning/cleaning tools mentioned earlier in this thread.

• looking for a beginners guide on site ot

  Good evening

  Prepares to make a study of ease of a fairly large site. About to switch to an any other nic (intel 3945ABG) wireless which is not perform as well as his cousin, 2200BG. looking at the stats of the cards he has no sense as intel says (from my understanding) 3945 is more sensitive.

  Given the size (more than 220 000 square feet) of my installation, I want to make sure I do it correctly the first time around. I have the equipment that will make this card.

  What I did in the past to resolve issues is going every 5 feet and manually save the SNR using something along the lines of netstumbler. Is this correct?

  any suggestions would be great.

  Hi Robert,.

  Here is some info that may help;

  Site survey wireless FAQ

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml

  This Excel macro tool is designed to work with NetStumbler to help you complete a wireless site survey. When running NetStumbler, the macro allows you to stamp your direct access points, the signal levels out of each access point and export raw data from NetStumbler to create a report practice.

  http://whitepapers.ZDNet.com/download.aspx?docid=177121&promo=100400

  I hope this helps!

  Rob

• All about auto-site by WLSE

  I plan on auto-site every Sunday in the WLSE (v2.13.1).

  Regular work site-survey works well and connected.

  But, after being questioned, there is no channel setting and the power of the APs changes.

  Do I have to manually apply the serveyed value to the AP by WLSE? not automatically?

  Hi Kwon,

  My understanding of the function has always been that those surveyed values will have to be applied manually. We do not run WLSE more so I can't check it for you (but I'm sure);

  How it works

  Self re-Site Survey uses data from previous RM assisted Configuration work to compare the current performance of the APS selected against performance data collected the last time radio parameter generation has been generated for the APs specified and applied to specific ground. If the APs radio performance decreased by 20% (a setting configurable by the user), an error is generated and ask you if you want to generate new radio parameters. The new radio parameters are compared with existing data, and if the recently generated radio parameter gives better results, you can apply the new radio settings to the selected APs.

  Data produced

  Self re-Site Survey results in an error if performance radio of the specified floor decreases the specified percentage. It also allows to generate new radio parameters and apply these settings to the APs of the specified floor.

  This doc WLSE.

  http://www.Cisco.com/en/us/products/SW/cscowork/ps3915/products_user_guide_chapter09186a0080527f3a.html#wp999433

  I hope this helps!

  Rob

• Cannot access the Office of Mobile site

  Hi all

  A customer asked me to add a mobile version of their site, which has been done.

  Now, they are asking for a redirect button view the Office website so that people can access the full content if they want to.

  However, when the link is done he simply load to the top of the mobile version again.

  Safari on the iPhone has a feature "request site office" - but even that redirects to the mobile site.

  Is there a way to stop what is happening?

  Site is: www.esteponagolf.com

  Thanks in advance for anyone to help!

  Hello

  When you create the hyperlink you manually inserted the URL "http://www.esteponagolf.com/index.html".

  If Yes, then remove and select desktop from the drop-down list homepage and it should work for you. Look at the screenshot below.

  

  Please let me know in the case of any confusion.

  Concerning

  Vivek

• Customer survey - webform or web app?

  I want to build a customer Web site survey.

  I know how to build it as a form of web - but then how to collect data?

  Someone there example of this?

  Or should I build like a web app instead?

  What do you suggest me?

  Appreciate your comments!

  Hello

  Whenever you create a form with a custom field, a case is created on presentation. You can access form data through CRM > case.

  Kind regards

  Aish

• Keep the private Web site

  How can I create a "login" page in order to keep the private site?

  Hello

  There is a lot of discussion on this topic.

  If you are using Business Catalyst, then it is possible to password protect some or all the pages in a site hosted by BC. To do this, there are a dedicated feature available in British Colombia called Secure areas. However, this feature is not available in the basic web site plan (this is the default plan, that a site of Muse is published in British Colombia to the title). To use this feature, a site of BC must be under the web marketing or web site map business. Here you can find the detailed site plan benefits: http://helpx.adobe.com/business-catalyst/kb/detailed-plan-breakdown.ht ml

  More details on these documents:

  http://helpx.Adobe.com/business-catalyst/partner/add-secure-area-your-site.html

  NES http://www.bcgurus.com/tutorial/How-to-use-Business-Catalyst-Secure-zo

  There may be some workaround solutions that are mentioned in this thread:

  http://forums.Adobe.com/message/5553739

  Thank you

  Sanjit

• Can not post answers in the section of photoshop feature requests

  the reason is probably obvious but not for me,

  I can't post a reply to the comments of anyones or thread in feature requests of photoshop, he bed usually 'reply' to be able to comment on anothers comment,

  but don't bed that 'report abuse' in the photoshop features request thread.

  When I select 'new' and look for the photoshop features request thread, its greyed so that you cannot select

  I get bad here,

  I am connected, by the way.

  Cheers.

  They have created a new site for feedback. Feature request site is read only now.

  Read the text above the sections of the discussions. You will find the link to the new site.

  Or click here:

  http://feedback.Photoshop.com/photoshop_family

  :-) miss marple

• Move the SIT main menu of SSHRC

  Hi all
  
  I have a requirement to allow the user to SSHRC access a feature to SIT in the main menu of SSHRC
  without using the special function of information
  
  enjoy your entries.
  
  Thanks in advance...

  Take a look on the last thread of answering machines, there may be some similarities.

  I recommend always watch the self-service deploy self-service capacity human resource Guide, which gives a lot of information on the configuration of self-service yo. There is a section specifically on the ISBT, how dosplay them and how to control those posted.

  Regadrs

  Tim