filtering in the connections Panel

Similar Questions

• It is a way to password protect the Panel options of access, including the connection settings?

  Is there a way that access to the Options panel can be locked by an administrator. In particular, I would like to block a user to change the proxy settings in tools > Options > advanced > network > connection settings. I would like to be able to lock the settings to (use the system proxy settings). The OS is windows 7 standard user account controlled by a small business to windows 2008 Server.

  If you get the α error reading failure then it means that there is a problem with the file to mozilla.cfg or Firefox can't find the file that you may have created mozilla.cfg.txt where you saved the file as a text file (check the type in the properties using the context menu to see if it is a CFG file).
  
  The mozilla.cfg file must be in the main folder of the Firefox program where also the firefox.exe file is located.

  You should have at least two lines in mozilla.cfg.
  
  The first line must always be a comment (/ /) because this line is ignored.
  
  The pref value depends on what you want to use for the connection parameters for the use of the system use 5 proxy settings.

  //
  lockPref("network.proxy.type", 5);

• Connection of the control panel LCD of Tecra TE2000

  Have a problem with the entire monitor as there are two sets of cables from the lcd panel, we have a sockett and other two wires (black and white) are equipped with an individual connects the microphone. I tried to find a manual anywhere, but could not. Can anyone advice on this problem of mounting?

  Where on the motherboard is the connector corresponding to these two wires?

  Thank you very much

  bluestride

  Hello

  These two wires (black and white) belong to the WLAN antenna and must be connected to the wireless network card. For this model of laptop wireless network card is optional and I don't know if the card is inside.

  Sticker WLAN is placed in the lower corner of your laptop?

• Is it possible to limit the number of connections to the remote panel to a vi?

  Hello

  I have an application that runs on a PXI RT system and I use the remote control to access. My license allows me to have several remote connections and it's ok that I sometimes need to open several remote panels at the same time.  However, I would like to limit the number of connections for a particular VI 1.  Is this something that can be done?

  Kind regards

  Patrick Lessnick

  The way it can be done is to interview customers who are connected to the VI through a remote façade.  When you do that, you close the connection to anyone, but the first person who connected to the façade.  In this way, if someone is running the VI, no one else can connect.  Once they are made, someone else can then connect to the remote façade.  I created an example illistrates community this behavior.  You can find it here:

  http://decibel.NI.com/content/docs/doc-9673

  If you have any other questions, let me know.

  Scott

• Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

  Hello

  Developing a Vision System using the following:

  • LabVIEW 2010 SP1
  • LabVIEW 2010 SP1 real-time
  • Vision development 2010 SP1
  • EVS-1464

  My question is:

  How can I view my front panel, running on the Exchange virtual server on a monitor connected to the DVI - I output of the EVS-1464?

  Thanks in advance!

  Roy

  Hi Roy, I'm not sure if actually read Hossein that KB or not, but she deals with the display on the front panel on the network on a Windows computer, not on via the connection of the monitor on the Exchange virtual server running LabVIEW RT.

  To answer your original question, no, it is not possible to look at the façade of standard LabVIEW on the RT system today. All the code used to display all the buttons on the Panel before the user interface, controls, and indicators are simply not present in LabVIEW Real-time and is only visible on a separate computer that is running the development environment or by using a web browser that has the plugin installed LabVIEW.

  Have a display of the UI on RT is certainly a requested feature and it would be available someday. You can see this request: http://forums.ni.com/t5/LabVIEW-Real-Time-Idea-Exchange/Real-time-display/idi-p/1391108 . He has some good ideas for what other alternatives exist today also.

  However, it is a way to use the monitor on the Exchange virtual server and other LabVIEW RT systems output. Module Vision Development includes video RT on the screw that can display any image on the connected monitor. You can either display images captured from cameras or images custom overlay text and simple graphics objects (lines, circles, rectangles, etc.). It is certainly more effort than normal front panel editor in LabVIEW but it could be adapted to your needs if you want some things to be displayed. You will of course have no mouse/keyboard so that you cannot interact with any display of the elements directly.

  Eric

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• another computer will connect to the internet. Nothing in the control panel

  Unable to connect to the internet on another computer. There seems to be no option in the control panel and none under the heading network. I have a Vista Home Basic for over 3 years and this is the first time I had this type of problem

  Are you can advise me on other measures I can take or if you stop rather giving advice that are ok as long as I know don't not to wait that all other responses. Thank you

  A response may take 10 minutes or 10 hours here. We are not employed by Microsoft.

  These are public Forums, which are only driven by Microsoft.

  "Always waiting to be part of sfc you mention so is unable to launch the scan.

  If the SFC does not start, perform the following step:

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• Network connections on the control panel

  Running Windows 7.  You want to change a network connection name.  Help sought for "Rename network connection."  A link "Click here to open network connections" appears.  This link works and goes to everything in Control Panel > network connections.  However, when I go directly to the Control Panel, there is no such item in the list, only the network and sharing Center, which does not have an obvious way to display all the available connections, only the one in use.  Why is this and how do I solve this problem?  Thank you!

  If I understand what you're asking about, go to control panel, go to network and sharing Center and click on the link in the left pane to "change the map settings.

  That ends at the same place (network control and Internet\Network connections) you get to by clicking on the link in the help file.

  You can go directly to "Network connections" by typing "ncpa.cpl" (without the quotes) in the start menu > Search box and press enter

• HP plotter designjet 510 appears as ready in the control panel, but is not drawn. Plotter is shown connected to USB003. Any ideas?

  I am running windows vista 64-bit. I also have downlaoded and installed service pack 1 or 2 - I forgot. But now, even though I see the tracer in the control panel---> windows printer as "ready", I can't draw anything. The abacus is silent. When I click on the print status (the little icon on the bottom right of the screen), it displays the status of trace as error.

  Any ideas?

  Hi Moussa,.

  Thanks for posting your query in Microsoft Community.

  According to the description, you are facing problems with printing through HP Plotter DesignJet 510 and receive the status of tracing as error. To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit article and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: If the method above does not help then you can follow the steps in the HP tool specially for HP devices.

  Try the HP Print and Scan Doctor

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Alternatively, you can contact HP Support for help on the issue:

   

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!

• Satellite C55: microphone does not work with the connected headphones

  Hey everybody,

  I have a Toshiba Satellite C55. I've seen other forums posted on this topic, but none of the solutions seem to work for me. I tried to uninstall the drivers and restart the computer, and configure the microphone when the headphones are connected.

  My microphone (installed on the laptop) works completely fine... until I have plug in my headphones. He stops working, but I can still hear the music or friends through my headphones. They have a regular pair of Sony headphones, not headphones, so they do not have a microphone on them or anything. My microphone has never worked with the headphones plugged in, and the computer is only a few months old. I would really appreciate a clear solution, thank you for taking the time to look!

  What Satellite C55 do you have exactly?

  This laptop does support that one socket for headset and microphone, or you have two different plugs: one for mic and one for headphones?

  Usually, you can check the playback (speakers, headphones) devices and recording devices (microphone and external microphone) in the control panel → sound → playback (or recording) tab

  If you need to check if the internal MIC is set as device by default when the headphones are connected.

  In the event that the laptop uses the Realtek audio driver
  Reach
  Control Panel → Manager Realtek HD Audio → select Mic tab → click Device avancΘs
  Then select option button separate all entries in the independent input devices.
  Click OK
  Speakers of tray right click (Volume) then the recorders (confirm the microphone is active) → select microphone → click on set default (default device)
  Then close

• Satellite P500-193 - how to disable the multimedia Panel?

  Hello!

  I just bought a Toshiba Satellite P500-193. It's great, but I have a problem. During online games and other games my hand sometimes 'click' on the media panel and then windows media player star and game is minimazes in the bar system :(

  How can I turn off this Panel the temporary? Photo of this Panel: http://yfrog.com/87toshibasatellitep50002j

  Hey Buddy,

  I checked my Satellite P500 and it seems that you can disable temporary t these buttons of illumination.
  You can completely disable the buttons of the illumination in the BIOS (the BIOS setup > advanced > System Setup). There is an option called function key. You must set it to disabled.

  But I m wondering about this problem, I put t he have while playing games. Alternative, you can connect an external keyboard to play games. :)

• Reconfigure the connection Wireless on Satellite M160

  My wireless seems to have gone wrong somehow. The computer will not pick up or connect to my network. Is there a way I can reconfigure the connection?

  Hello

  Of course, you can reconfigure the WLan settings.
  First of all, I would recommend resetting the router Wlan. Check the settings of WiFi, filtering by mac address, SSID name encryption.

  How have you tried to connect to the Wlan? Did you use the 3rd party Wlan client configuration tool (Intel, Atheros) or did you use the Wlan configuration option to own Windows?

  If you use a 3rd party client WLan configuration tool, then the windows own option should be disabled.
  I recommend to go through all the settings (encryption key, ssid) and please check if everything is good.

  By the way; Please don t forget to activate the wireless on your laptop network card ;)
  The switch on the side of the laptop must be turned on, and you should switch to WLan using FN + F8 key combination.

  Good bye

• Equium A60-181: how to manage the connection to the TV or monitor

  Hello

  I have an EA60-181

  Basically I'm trying to look at something I have on my laptop on my TV, I have connected to correct blue port on the back on my laptop and plug the other half into the phone from my pc to my TV, the pc cable. Then I turned my tv on pc workstation, you press fn + f5 for lcd/tv and nothing. I just get a no signal going to my tv as it is said that he is looking.

  I don't really know what happens someone please tell me what is happening.

  What is the resolution?

  p.s. When you look at the section displayed on toshiba hwsetup that is set to lcd + analog RGB and on the Advanced tab on the control panel display screens Setup ati watch tv is not connected, even if the cable is connected someone help me?

  Thank you

  Wayne

  Hello Wayne

  Sorry, but I didn t understand how you connected to your laptop to the TV and you hear with good blue port.

  If you want to connect properly and the easiest way, you must use S-Video output port on the back of your laptop and connect it with an S-video cable to your TV (if TV has an S-video port). The S-video port on your TV should be enabled and using FN + F5 key combination that you should be able to get on television.

  If the image is black and white, this means that S-video port on your TV is not properly enabled.

  Good bye