Filters BPDU

Similar Questions

• Configuration port-channel, DTP, disabling

  Hi all

  I had a problem on the day where I wanted to attach a pile of 3750 x 2 to the network, the core is a 6500.

  There was a link configured for the core of the 3750 he had the configuration necessary trunk with BPDUFILTER active

  at the end of the base he had the standard configuration of trunk. The link is on the rise and work.

  Went to get a second battery for the heart link. Decided that DTC must be turned off at the end of the SWITCHPORT NONEGOTIATE battery

  the normal chest on the port configuration on the port channel port joined. Then suddenly the newspapers went crazy and right now, I need

  Spanning tree went crazy and started blocking areas of the network to avoid loops. There is STDS running in the network

  I had similar errors to this % SW_MATM-4-MACFLAP_NOTIF

  I pulled the battery cables and all services affected later came back.

  I know that enable the BPDUFILTER option stops at the port to participate in STP.

  Please could someone confirm due to the incompatibility of the config on these ports it has this problem or is there something I missed here

  Thank you mnay

  The BPDU filter is the root of the problem.

  You can't have two active rising running without creating a loop, unless they run into a PaGP/LACP-EtherChannel configuration. By having one or two links running with a filter BPDU, spanning Protocol tree on the 6500 didn't know that a link had to be in a deadlock state and he was panicked when MAC addresses on the stack of 3750 began to stir between interfaces.

  3750 cross media - stack EtherChannel using LACP, so if you want the resilience of two connections without having to factor in the covering tree branches, it is a good idea to combine the two in a group of channels and have both the 3750 and 6500 treat them as a single logical connection.

  If you want to keep them separated, you will need to remove the filters BPDU these ports and leave spanning tree figure things out properly.

• Is the spanning tree bpdu filtering on the 5548 "bpdufilter default spanning-tree portfast'

  It seems to me as "the protocols spanning-tree bpdu filtering" on the 5548 the same "spanning-tree portfast default bpdufilter" on the switches of the series N - is that correct?  If this is not the case, what is the equivalent command to 'spanning-tree portfast default bpdufilter?

  Ken

  They lead to the same result, just with a little different method. N-series bpdufilter search all ports configured for portfast and disables the transmission and reception of BPDUS on these interfaces. With the looks of 5548 bpdufiltering for ports with covering weight tree disabled. There is not a command on the 5548 that will search interfaces in portfast mode and filter the BPDU.

• Is not junk e-mail filtering. I get double messages

  Is not junk e-mail filtering.  I also get double messages.  It's a mess!

  The following Support from Apple about iCloud Mail can be useful:

  Identify and filter junk e-mail in iCloud - Apple Support

  iCloud: manage junk e-mail

  For general mail adverse treatment suggestions, please read for Mac Mail: If junk mail filters do not work properly.

• Maximum number of simultaneous filters

  Hello

  I discovered that when you reach 8 different filters on a worksheet, the option to add a new filter gets grayed out.

  Is it possible to increase this number?

  Thank you.

  Ooops... It looked better before.

  Found this: Re: filter limit or bug?

  There's a nice solution to the inside, whereas it is sad because of the capabilities of computers (RAM and processors), we cannot use more than 8 filters at the same time...

  Maybe for future issues of update...

• Junk mail filters don't seem to work

  Hello

  Recently, I received a lot of spam. After awhile, I checked the messaging app for the filters, and I tried different combinations of filters; in the e-mail, as well as under the filter settings, settings I chose the following filters:

  "If the sender ends with"towels"then delete the message. Ditto for ".xyz".

  The program includes logic, since if he thinks that I introduced a change in the operating instructions, he immediately realizes all the instructions of.

  How can I solve this?

  I use MacBook air, the latest version of sw and Gmail. I guess I could install filters on Gmail, but I wouldn't be able to use mail filters?

  Thank you in advance, the clues!

  Hello and welcome to Apple support communities, Martjenko.

  It seems that you have some questions about junk mail filtering in the Mail application on your MacBook Air. I know from personal experience that it can be quite tedious to sort task and delete unwanted email box, but no worries, I'm happy to help you resolve this issue.

  To answer your question, Yes, there are filters in Mac OS X Mail that you can use with your email accounts to filter spam. Mail is designed to do this automatically. Use bandages below for steps on reducing spam in the Mail application, and help with what to do if junk mail filters do not work properly.

  Address postal (El Capitan): reduce the spam in your Inbox

  Address postal (El Capitan): If junk mail filters do not work properly

  With Gmail in particular, it is already implemented within your email account to identify and manage spam and suspicious email so automatically. Here is a link to more information about how Gmail handles this:

  Gmail Help Center: Spam and suspicious e-mails

  Thank you for using communities of Apple Support.

  Take care!

• Links e-mail and filters - the wish list items?

  Compose an e-mail containing a link does not support stable link until the message is saved or sent to the car. This limitation is known to be intentional in the documentation. However, in the good old Eudora, press a hot key while clicking on a link in an email being composed active link for the optional test right then and there. Saving time very practical.

  Filtering of incoming emails via Tools/Message filters works, but requires many unnecessary steps to create a new filter. In good old Eudora, with an open incoming email or in the preview pane, the mouse option to 'Make the filter' opens a filter window using the e-mail address to propose the filter to use or replace, options that ends with a "Create filter" button. So the first time, you get an e-mail from a friend who deserves a filter allows you to filter all future emails boyfriend as you like - while reading that first email in the mate. Tremendous work saver and eliminates the need to remember the process of creating filter separated necessary in T-Bird.

  I'm a new user, so please let me know if I missed some useful options. Also I would like to know if it is a list of wishes that would be better directed elsewhere. Thank you!

  'Dead links' are a basic 'feature' of the Thunderbird editor and is not likely to change anytime soon.

  You can right click on an email address in the message header pane and choose "create filter from. This will start the construction of a filter with 'Sender' "is" and informed selected e-mail address.

  An add-on, QuickFilters, introduced a process of construction of drag-and-drop filter.

  http://quickfilters.mozdev.org/index.html

• How to copy the message filters for an email to another account email account

  have a filter of msg in a single email counts with many entries - how to copy this msg filter to another account

  If you want to duplicate a filters of accounts to another account, you don't need to create them again. Output of Thunderbird and copy the file "msgFilterRules.dat" instead. If the account is in a different profile and it uses custom headers, you will also need to copy the parameter mailnews.customHeaders to prefs.js.

• How to effectively create message filters?

  Hello

  I have dozens of filters, just move messages to an appropriate folder, such as social networks, services, forums, mailing lists and so on.

  It's a pain to create a filter whenever a new unclassified message arrives. In addition, it takes a lot of time, 1 min or more to run all the filters on my Inbox.

  Is there a better way to do this? I wanted to say "messages like that will go in this folder" simply by dragging or so.

  Instead, I have to:

  1 copy 'from' address
  2. open the filters
  3. Select the appropriate folder filter
  4. scroll through the list of rules and add a new
  5. apply the filter to the Inbox

  If there is no better way, how can I suggest such an improvement? It seems that the IRC channels provide no help on this.

  Thank you.

  Try QuickFilters. It offers a metaphor for learning by examples of drag - move.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/quickFilters/

• the space in the center of the display calendar top of the real calendar no longer displays a list filtered in several events.

  the space in the center of the calendar view top of the real calendar that is used to display a list filtered in several events. This list is now missing. How can I get that back?

  Finally, I noticed a menu item "events and tasks > find Events" with no shortcuts like Ctrl-F, which I tried. That fixed it.

• Can I print log messages that have been filtered and blocked?

  I have a lot of blocked messages I want to print from the newspaper. Is this possible to do? Please advise!
  Thank you!

  If you have previously installed Thunderbird to record the activity of the filter, the answer is 'yes '.
  Open a blank "Notepad" document, or use your favorite text editor.

  Back in Thunderbird, open the dialog box filters.
  "Tools - Message filters" to see the list of filters.
  Use of the 'filters for ' drop-down menu to set the account that you want to print.
  Press "filter the log.

  Click inside the window that appears and press onCtrl' + 'A', to select all the text.
  Press onCtrl "+"C" to copy to the Clipboard."
  Go into your empty text document and click inside it and press onCtrl' + 'V' to paste the Clipboard into the document

  You can now edit or process the data more far, and
  Print the document.

  TB - 38, 3 Win10-PC

• The filters do not copy old messages on new folder

  Dear community,
  I tried all the possible configurations in the Menu Tools-> message filters, to filter all (old and new) copies of messages from specified senders in specific folders, but nothing happens. Help on this isue would be welcome with gratitude. Thank you. Jerome

  Additional information:
  Permit auto filters run on the Inbox for mail unread.

  If you want to manually run a filter on a specific folder to move the already downloaded mails that can be in all folders:
  Tools > Message filters
  Create filters.
  Only enable the filters that you want to use.
  ' Run the filters selected on: select the folder in the account.
  Click "Run Now".

  Repeat for other folders.

• Filters stopped working after deleting the .msf files

  Thunderbird has become slow and unresponsive so I used a tool to correct the problem, thunderfix.
  (probably it was preferable to delete the files manually, as in almost every case XD)

  Mailboxes are smooth now, however, the filter not covered more.
  When loading, Thunderbird advise me to repair the permissions/folder.
  I tried to add the 'control' my user permissions windows (folder)
  Where is option fix in thunderbird?
  Finally, I'll also have a backup profile, if the operation is impossible.

  Solved. (I'll close it).
  I met the problem once again, but I took the 'magical' moz backup to restore. Please do not use Thunderfix and do it on the manual way: on win10, with administrative rights, also has problems with filters as mentioned above.

• TB filters seem to be applied to all THE emails coming in the opposite direction.

  I can simply not TB to work reliably message filtering system.
  I have to do something wrong.

  There are a few interest groups with which I agree. They send lists.
  Some people are, for example, on yahoogroups. Yahoogroups has a custom header that is "List-ID:
  Sometimes this List-ID works sometimes not.

  I also try to use Return-Path, respond to, to, cc,... sometimes I tried partial subject lines matching: contains [CatsNDogs] for example.
  So I want to each incoming message to go in one folder that represents his 'list'... the list of cat, the dog, the list of fishing and so on.

  Then, after all those who are tested, "you are in the chat list?", then you are in the list of dog... There you are my AB staff of friends (then delete it in 'Mine'.

  The rest fall into the unknown.

  What I get is irregular. I get email fell in 'Mine' because the 'From' IS a guy I know. BUT the List-ID indicated it was an email from the LIST. The return address IS only yahoogroups email address LIST.

  For each LIST, I selects only the header lines containing the corresponding email list address.
  The email has been selected. Must have.
  How the filtering system can ignore the header selected?

  I even learned down to partial words to make it simple for a lethargic program to find the cat in CatsNDog.
  I tried Stop-filter-performance (have FiltaQuilla as an add-on).

  And yet, I find myself with dozens of real Email list in my personal inbox.

  And this error/bug persists Earlybird and several versions of thunderbird.
  I tell myself that I do not have the filters properly.

  A typical example of the 20 others:
  To or cc contains Meow copy cats on local folders

  It works for some and fail for a dozen, there is absolutely no pattern as to why it fails.

  Filter logs show that TB seems to apply all filters to each new email.

  Is this possible?

  As you have identified each mail is tested against each filter. any filter is the mail first then he will be treated by the latter, your action is movement, then the following filter will not run against her because she is no longer in the folder. The filters are executed in the order that they are in the list of filters,
  9nence the move up and move to the bottom of the dialog box options

• I set up filters and now I want to change, but how?

  Several years ago, I have implemented filters to automatically move Spam messages so the subject line contained some words $ win, Lotto and so on. These filters are always active.
  Now, I want to make some changes but could not find the method that I used once.

  = Email spam filters
  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.