Setting of Sony XNV-770BT loser station

Similar Questions

• Changing of country Sony XNV - 770BT FM radio

  I have a XNV-770BT and I try to use it in South Africa, but radio stations move in increments of 0.2, y at - it an option to change the region or country?

  Thanks in advance!

  Hi Chistucky,

  The United States FM station frequency is always an odd number. As this unit is designed to be used in the United States, the system on the presetting device stores that strange number FM radio frequencies (95.7 Mhz, 100.1 Mhz, etc) and it will not save an even number of radio frequency. There is no option to change the region or the country.

  If my post answered your question, please mark it as an "accepted Solution".

• Setting up Sony Alpha 6000 to transfer files on my Mac

  I downloaded the software of automatically importing wireless Sony. I connected my camera to my computer via the supplied USB connector.

  I'm then in an infinite loop, which tells me that I can not complete the installation because my Alpha6000 is connected to the computer. But when I discontect, I get a message telling me that the camera must be connected to the initial installation.

  I'm confused. Any suggestions?

  Don

  Hi canuckdon,

  Welcome to the community of Sony!

  To import files using automatic import wireless, we suggest connecting the device to your Mac when you are prompted. Please follow the guide below for easy installation to the top.

  Follow these steps to import your photos without wire.

  • Initial setup process:
  
  
  • 1. Make sure you that using a memory card is inserted in the device.
    
    
    2. Turn the camera
    
    
    3. On the camera, set the mode of USB connection from the camera to the MTP or PTP.
    
    
    4. Connect the camera to the USB port on the computer.
    
    
    5. On your computer, go to Finder and select Applications.
    
    
    6. Select automatically importing wireless.
    
    
    7. Set up your computer as a device to import files from your camera wireless.

       NOTE: If the device should be synchronized with another computer, the new computer must be defined as import wireless device.

    
    
    8. In the auto import wireless window, select set.
    
    
    9. In this computer will be set to the wireless device for your window of the camera import, click OK.
    
    
    10. Unplug the USB cable to the camera and the computer.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• I have my time capsule for base station; How do I set up just for Time Machine?

  For several years, I have used Time Capsule as a wireless base station more backup Time Machine. I back up a Macbook Air (single user) and iMac with 2 users (two computers running on OS X 11.5). With Comcast Xfinity I need is more like a base station. In fact, I reset my router Xfinity name and password to replicate what was the name and the password to my Time Capsule network. But, now that it's done I can't understand of set up time capsule without set it up as a base station. The installation guide seems to suggest that I could do so by plugging the ethernet cable from the modem to an ethernet port which is not the WAN port. But this configuration did not work. The installation wizard only took me the steps to set up a wireless network. How can I simply we it with Time Machine as an external hard drive?

  The installation wizard only took me the steps to set up a wireless network. How can I simply we it with Time Machine as an external hard drive?

  Simply turn off the time Capsule wireless.

  To do... Open AirPort Utility, click on the Time Capsule, then click on modify in the window that appears

  Click on the Wireless tab at the top of the next window

  Change the setting for the Mode of network on 'Off '.

  Click Update to save the changes

  

  But... and this is a big BUT... This work of pourrait ... and maybe not. Even if the backup on the Comcast network seems to be working, there will be no help from Apple in case of questions or problems of backup.

  The reason is that, so that your Time Machine backups be supported officially by Apple, users must save on the Time Capsule wireless, or connect their Mac (s) directly to one of the three ports LAN <>- on the Time Capsule using a wired Ethernet cable connection.

  If you decide to try the method of failure to load, please let us know how things work after a few days.

• Sony Mobile Service Center is terrible.

  Dear Sony Mobile,

  I would suggest that Sony Mobile should choose a good distributor authorized for Myanmar. The authorized distributor of Myanmar, Alpha Techonology & Communication can support services for customers. I leave my Z2 phone to the service center for 32 days and they meet finally is that they can't fix, and they also take my sim card and 16 GB sd card. I does not fit my SIM and SD card. The worst Service I've ever seen. I hope that Sony could provide better after-sales service and the best distributor. I hope that incidents like mine could be reduced. Otherwise, Sony Mobile would lose their market to Myanmar later. I hope that my help of suggestion to improve the Sony laptop.

  Sorry to hear that, but you must contact care Xperia to formulate a complaint and feedback before http://www.sonymobile.com/global-en/support/contact-us/

• Profile of correction does not account for Sony brand

  Profile correction automatically recognizes some make Hasselblad. My pictures are taken with Sony Nex - 5R. If I manually select "Sony E' that make LR recognizes the lens properly. Is it possible to fix this or is it a bug? Found a topic on the forum of the year 2007, but there is no solution (at least at the time).

  Thank you

  I found a few examples of raw images NEX - 5R at PhotographyBlog.com and has tested them with PS - CC / ACR 8.4.1.

  There is a purpose built, but only for Chromatic Aberration profile, so the external profile that you see when you select Sony E to do may indeed be correct, but so is the profile of Hasselblad, because it gives a nearly identical correction, with slightly more vignetting correction flashes in the corners, even if in the example below there is the flash fall It is difficult to say which version of the correction of vignetting is more correct.

  Hasselblad detected using Auto as the correction of the goal of installation, as well as the ToolTip describing the embedded profile:

  

  Profile of Sony E detected using as the default setup of the lens correction after having been defined as default profile:

  

  The raw image came from here:

  http://www.PhotographyBlog.com/reviews/sony_nex_5r_review/sample_images/

  So my interpretation of the behavior of LR, based on this one objective I found samples with Hasselblad profiles are correct for your camera, but if you set the Sony E profiles using the default lens profile process, described above, the corrections will be also correct.  Without knowing if Sony made Hasselblad lenses or Hasselblad makes Sony E lenses, and without knowing if their electronics is the same, it is difficult to know if LR is something wrong to recognize the Sony E lenses like Hasselblad objectives.

  Don't you see the same corrections for your lenses you opt for Hasselblad or Sony E?

• Restore more of a browser window

  I often have two windows open in FF. If the browser is closed and reopened, that restores a SINGLE set of tabs and I lose the other window. How can I configure FF to browse all open windows?

  You can try the Session Manager extension.

  • https://addons.Mozilla.org/firefox/addon/session-manager/

• Win 10 improvement of the non-functional touchpad

  Hello, after upgrading to win 10 my touchpad doesn't work at all
  I tried to find some tools to download, but without success is there a software that could help me?
  Thank you.
  My camera is Satellite P50 - A - 13 c
  PSPMHE

  Hello

  Check Device Manager to see if the touchpad is found and configured.
  If it is configured correctly, please just try to activate by Fn + F5 & (or only F5 according to FN-configuration).

  If it is not set, please try to use gas station to search for driver updates.

  If that fails also, install the version of Win 8 of your touchpad driver.
  There is one for Synaptic and one for the ALPS.

  If the driver object and is not to be installed in an environment to win 10, you're a little out of luck ATM.

  Tom BR

• Toshiba 22L1333G - TV channel list resets after a few days

  Hello

  After setting my personal list of TV station for the 3rd time the re TV - sets the list of cable services provider after a few days

  How can I avoid this and make sure that my favorites list stays on.

  Did the firmware update?
  How about the parameters and loading factory settings?
  Give it a try.

  The firmware as well as the user manual can be downloaded here:
  http://www.Toshiba-OM.NET/

  By the way: the TV supports the dual tuner (DVB - T, DVB - C / DVB - C HD)
  This occur using the two tuners?

• Qosmio G50 - FM Tuner/TV Tuner do not work together

  Hello

  I search for a solution to my problem but still have not seen anywhere.
  My problem is with my G50 (Aust version PQG55A-04J01Y) which has the tuner FM (Toshiba FM Tuner FM - 100 v1.1.0.48) and the TV tuner (Toshiba USB DVB-T/Analog Hibrid Tuner v 2.3.3.21) built in.

  I am running Vista Home Premium (32 bit) with all the latest updates from Microsoft.
  I can't get the two to work together, they function separately.
  I'm not talking at the same time. I need to configure each one whenever I have swap between them.

  * To implement, I open WMC and go to:
  * "Tasks".
  * Settings.
  * "TV".
  * Set Up TV Signal.
  * Confirm my region as the Australia
  * WMC then download the latest info for my region and I can then "Select your TV Signal"
  * Here, I get to choose between 'Câble', 'Satalite' and 'antenna '.
  * I select 'Antenna' and click Next
  * I then have the chance to choose between:
  # "Analog terrestrial (PAL/SECAM)" - which activate the FM tuner
  # "Digital terrestrial television (DTT)" - which activates the TV

  If I set up the TV I lose access to my FM radio and WMC tells me that I don't have a FM tuner installed.
  If I set up the FM tuner I lose all my TV channels that I've saved.

  Why the two could not work together? :_|

  Hello

  > Note that in the bowels of the system, there is a 32-bit program FM tuner, but also an FM tuner 64-bit, but maybe you can run a?

  I think you can notice a program 32 bits and 64bitbit because of the different versions of Vista. Vista 64 bit OD needs a 64-bit driver and Vista 32 bit needs a 32-bit driver.

  Back to your problem with the FM and TV tuner:
  I put t have an Australian series G50, but I think the Akuma is right. Tuner FM and TV tuner is a device I think, so you can safely just sort of signals; TV or FM.

  See you soon

• EliteBook 8470w: 8470w WIN 10 elitebook

  Hi, I think in upgarding and wanted to check the compatibility of the elitebook 8470w with win10?

  Problems with the hardware compatibility?

  In particular, intend to set up a HP 120W docking station, so I wanted to make sure that it will work with Win 10.

  Thank you, David

  It should work only HP didn't release driver patches for:

  Bluetooth

  Fingerprintscanner

  Some say that spirit the touchpath problems, but it works, but not all functions

  as the finger 2 roll, side scrolling...

  With a little research, you can manage on fixing problems like I did!

  But your system is ready to go...

  Greetings

  Sam

• Cannot complete the installation express airport using iOS.

  I go to Wi - Fi and find the aiport express under the heading "set up the new airport base station. I can access the quick screen to create my new network. Put in my info and it says creating this Airport Express to create a network. It's when things go wrong.

  It seems stuck "to search the new network for a long time. Then he said: an unexpected error has occurred, try again. At this point it I run the Setup again, that the error occurs because I'm trying to connect to the EA. I have to reset the AE to get another shot at the implementation of the new network.

  The modem is showing everything is fine. I bought the AE because he said that I could set up through my iPhone. It's very frustrating.

  Normally, the installation on the iPhone and iPad software works well and is in fact more reliable software installation on a Mac, it is therefore possible that you have a faulty AirPort Express... just as I did a few months ago.

  However, if you want to try the installation a few times however, we can do it. We assume that you have verified that you have a good Ethernet cable connecting the modem and the AirPort Express, correct?

  Can you provide the number of brand and model of the modem you are trying to use with the AirPort Express?

• New Apple Airport Express - I just swap out with my old?

  I use the old version, Airport Express, so I'll update to the most recent (reconditioned Apple).   Can I just replace the old with a new one, or what I need to reconfigure in public services from the airport?

  If I have to set it up, can someone tell me dumbed down how?

  Thank you

  It is always better to start with the default factory setting when the replacement of base stations.

  However, if both base stations are 802.11n models, you can use AirPort Utility to set up the terminal 'new' to replace the older one. If this is the case, you can just power the new base station, and then select its Wi - Fi your Mac network. Doing so will give you the opportunity to run the AirPort Utility. Just follow the steps automated to replace one with the other.

• BRAVIA KDL-32XBR4 of lines on the screen color

  After owning my Sony Bravia KDL-32XBR4 for four years, the screen has become a complete set of rainbow of colored lines, which makes it non-visible.
  I bought several Sony products, including TVs, in the past, according to their quality and maintenance in the long term and found this particular issue to be majorly get together. When I searched on the internet on the solutions to this problem, I found that many people have experienced the same problem on this model. The Amazon store indicates that 33% of the customers for this TV customer has had the same exact problem: http://www.amazon.com/Sony-Bravia-XBR-K... 406 & sr = 1-1

  I bought this TV Sony, KDL-32XBR4, for $1,400 and would like to be credited on a new Sony TV or have the current set by Sony without charge. It is a major problem with this model and the Sony should fix the problem. A TV should last longer than the four years that I used it. It was even longer than many other customers who saw their screens go to lines colored after only a few months or a few years.

  I'm sorry to see that you had a bad experience with your Sony TV. Sony believes that communication about these your concerns is best carried out through personal interaction with our teams of dedicated rather than a technical body customer service. Please contact our technical support team for additional assistance and/or repair option: http://esupport.sony.com/US/perl/suppor... = KDL32XBR4

• How fast can get a TCP read?

  LV 2009 + WIN 7 with 6 GB of Ram.

  I acquire two analog channels as a word of 16 bits each and adding a CRLF at the end example: 1234 567 \r\n

  These data are acquired to 50ms intervals and sent over a link WiFi for my notebook running code LV.

  I know not how fast the "TCP - Read" function can work and which mode (it has four options) to choose if I do not miss any incoming data...

  Now I get some data in French - initially rather quickly and after a few seconds, it slows down the consdierably. I'm running the TCP-read inside a timed loop and I tried various intervals from 10 ms to 500ms. The largest value works OK, but I need the fastest possible. Tips how to handle this?

  My code is attached. (The passage DIO works very well)

  Even if the passage DIO works, it doesn't make sense to use a sequence structure.  It would be better to change the Standard mode and the 100ms Timeout value instead of "wait for next"millisecond"Multiple" as leading to uneven wait times.

  TCP Read should run very quickly, subject to any waiting period that you set.  You should never lose data in any mode, although there is a possibility to receive a partial when you use Standard mode or immediate (unlikely in your case since you read so little data).  The operating system will be buffering of data not read for you.  If you want the fastest possible exchange, divide your code in two while loops, one for EID and the other for the series.  Serial communication can be simply a normal life while loop, with the reading of TCP dictate the timing.  Set a long timeout in buffer mode and the loop will run as quickly as it receives data.

  Also, when the loop ends, you must close TCP connections, not just one of them.