Similar Questions

• Turn off computer account in Active Directory will still allow the workstation to log

  I have a special scenario. A Windows 7 workstation was locking (pending of CTRL + ALT + DELETE) mode. Until I turned off the computer, the user account and the same account administrator, reset the password for this user and the workstation. My requirement is that the user cannot log on to the workstation again.

  However, the user can connect to the workstation.

  This parameter of register AD might lock the computer completely? or is there any GPO setting that could lock the computer?

  Thanks in advance.

  Pingala

  I suggest you send the request here:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprosecurity&filter=AllTypes&sort=lastpostdesc

• Find the name of host or IP address of the Workstation client of Virtual Office

  Hello

  I want to find the name or IP address of the workstation of the user within the virtual desktop OS.  Both are Windows XP.  The reason is that I want to run a logon script to run an application on the virtual desktop that establishes a network connection on the user's desktop.  For example:

  (1) user establishes a connection from their local workstation (IP: 10.1.1.25) to a virtual office

  (2) the command runs on the virtual desktop that retrieves the name of the host or IP of the virtualdesktop (10.1.1.25)

  (3) another command is running on the virtual desktop, which establishes a local network on the virtual desktop to workstation(IP:10.1.1.25) connection of the user

  (4) users and I are happy because it's all automatic

  Anyone have any ideas?

  Thank you!

  KO

  Hello

  There are several ways to do what you want. The easiest way is to use the local environment variable %CLIENTNAME%.

  Go in the virtual desktop from the command line, type: echo %CLIENTNAME%

  Now you should see the name where the client connects from the client.

  What you have to do is to write a script that gets the variable ping, of the environment, the name and read the answer which is the IP address.

  You can use the VB script that or a command script.

  Thank you

  Chris

• How to get the full username by the user windows login name?

  Hello.

  I need determine the full username by the user Windows logon name. Where are many ways to determine the logon user name. For example application property node App.UserName or % variable %username% in cmd. But I found that one way to determine the full username by connected on behalf of the user - command net 'user' in cmd. This way is very slow and requires a huge code (I do get logged in user name, check if the connected local user or domain, create the command net 'user', find in output full username).

  Is there a simpler way without using cmd?

  PS, Full user name is displayed in the Windows logon screen and on the start menu and can be different from the name of the user.

  Here which may help: https://decibel.ni.com/content/docs/DOC-24358

• I want to create the user in the direct areas but I found thi message: the requested account name is already in use.

  Over the period of re - use the account in the domains.live

  I want to create the user in the direct areas but I found thi message

  The requested account name is already in use or has been used in the past and has not been through the waiting period required of re - use.

  Can you help me

  Hi, Ahmed.

  It seems that the domain name you have selected is not available (or has already been used and it is found that the previous owner of the domain has used the same user name as an account).  In any case we can not help you here.  You need help from domain.live.

  Please go to http://help.live.com/help.aspx?project=domains&market=en-us&querytype=keyword&query=SNIAMODTUOBA&tmt=&domain=domains.live.com&format=b1 and down, click on support and follow the prompts to get help.  Although it is technically to the implementation of the field, I'm sure that your application will be either still answered or they will direct you to the proper location for assistance.

  In addition, you can try http://windowslivehelp.com/product.aspx?productid=25 for help Windows Live Administration.  If you can not find help with solutions validated or by performing a search, try posting in the forums.  I suggest the following for the problem that you specified: http://windowslivehelp.com/forums.aspx?forumid=7e6f04c0-6a48-4719-98f4-a9729d34c76e.

  I hope this helps.

  Good luck!

• VirtualMachine.Admin.Name and asking the user for the name of the server

  I need to allow end users to designate the name of their server requested when you submit a request through VCAC. I do this using VirtualMachine.Admin.Name in the custom of my blueprint properties and it prompts the user to set.  I have also some scripts that run with the heel of building put into operation once the server is built which require me to enter the VC:VirtualMachine object for the server with the name of the server.  It does this in a loop in a table of all the VC:VirtualMachines met my VCenter server and find a match on the name with an xpath expression.  The name of the server is collected inside the cutting-edge designer using the getVirtualMachineName activity.  This activity is integrated into the designer and aims to do exactly what he says.  He then handed the name in the VCO workflow.  Not much, really.  I have used this method a lot in the past with VCAC.

  Problem:

  
  Recently, I started running this script on a new installation of VCO (5.5.1) and the new instance VCAC (version 6.0 - 1720522) and I see a very strange behavior.  When I get the name in the tip with the activity of getVirtualMachineName Designer, the name is that name WOULD have been affected had I pressed VCAC to automatically generate name for me using a prefix of machine profile.  Remember that you must associate a prefix of the default machine on your group of companies.  This is the prefix that is used to generate the name and associate it to the server in VCAC despite the fact that I am more precisely the substitution of this name automatically generated with the VirtualMachine.Admin.Name custom property in the custom of my blueprint properties.

  The strange thing is that the server is correctly named in the VSphere console and inside the guest OS.  In other words, the name that the user places in the VirtualMachine.Admin.Name field is what you get in the console VSphere and BONES.  So that part works.  Then why is he not being correctly named in the VCAC VirtualMachine object?

  EC which claimant misnamed is originally my workflow to fail.  I can work around this problem in the workflow, but I fear that there is still problems on the road if the alias is associated with the server inside VCAC himself.

  Once again, I did this with earlier versions of VCAC and VCO and not had this problem.  Anyone else seeing this?  I'm doing something wrong here?

  The custom property to use to allow a user to enter name themselves is the host name (just hostname, nothing else)... That's what I put to prompt the user to our forms.

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• I want to share address books between different users on the same PC

  Hello
  We have a PC with two different users, but there is only one email address shared between them. We have a copy installed Thunderbird one of each user and a user has multiple accounts for privacy reasons. It would be really useful to have a shared common address book to access addresses of. Is this possible?

  Cheers, Marcus

  Marcus,
  It's really simple comes to mind, but here are two ideas to consider, depending on how often Exchange address book:
  (1) if the shared e-mail address is gmail, each user can then install the add-on gContactSync and let Google have the master copy. That would give each of you frequent clocks to the same address book.
  (2) easy, but not automatic approach would be for a user to be responsible for changes and periodically (daily, weekly,...) export the address book to a ldif file. The other user could then import the address book on behalf of TB.

  - duggabe
  

• In Firefox 3.6.8 is there a way to see "typed urls" in the drop-down list address without icons and website names? I want to see are "typed urls" and nothing else.

  I want to see are "typed urls" in the drop-down list address. This is the way it has been for a long time. Now, you get some icons and names/info of Web site with the url. It takes too much real estate on the screen and makes it necessary to scroll through the drop-down list. This is a feature that I don't need. Is there perhaps something about: config that I'm missing?

  You can also check:

  • Old address bar: https://addons.mozilla.org/firefox/addon/7637

• Different PC user name to the user license server names

  Hi all

  I encountered the problem that on some PCs running with a goal of training of RPF of generic user account, the License Manager will not grant one of my licenses in volume. How can I get LabVIEW to communicate with the license server with a different user name for the windows login name? I already tried tools--> user name, but it has not fixed the problem.

  I'm always under 8.2.1 on these computers.

  Concerning

  Oli

  Hi Oli,

  You have licenses based on the user or computer
  licenses? From your description, looks like you have several
  licenses based on users and multiple training computers where windows
  usernames are all identical. Is this correct? If that's the case then
  You should be able to grant a license in volume for this username but it
  you won't concede more than one license under the same name. Change
  LabVIEW settings will not solve this that this problem concerns more with Windows
  and VLM. To resolve this problem, you can either go in windows and create
  new usernames or you can call and we could you spent to get
  computer license and you should be good to go.

  Lars

• Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

  I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• my windows mail keeps asking for a user name and password. I am entering these two and it still will not allow me on the program. I tried to delete the account and start again, he still asks for the user and the password. any suggestions?

  It gives me the error 0x800CCC90 codes, 0x800CCC91 and 0x800CCC92 he also says the username/password invalid name

  Have you taken all the measures that I suggested above?

   

  McAfee antivirus is among the three troublemakers albums for Windows Mail.

  It sometimes takes a while before the symptoms begin to appear.

  First of all, turn off e-mail McAfee analysis, even if it is rarely sufficient.

  Then delete that email account (because it has been damaged by McAfee),.

  Restart Windows Mail, and then recreate the account.

   

  If the problem persists, the only way you can prove or disprove that

  McAfee is the culprit is to uninstall it, and then using their debris removal tool:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  If you decide to replace McAfee, we recommend a free antivirus

  the program that is no longer compatible with Windows Mail.

   

  Rather than move to another antivirus, another option is to upgrade

  for Windows Live Mail (WLM), which better resists the harmful effects

  too intrusive anti-virus products:

  http://download.live.com/wlmail

   

  Even with WLM, you must turn off email scanning in the antivirus,

  for the reasons explained here:

  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

   

  Gary van, Microsoft MVP (Mail)

  "ddavid01" wrote in the new message: * e-mail address is removed from the privacy... *

  Thanks I have macafee. Outlook Windows will work not be same problem.

  Gary van, MVP (Mail)

• Where can I find directions to the user for the hp officejet J4680 printer?

  I am a novice and you want to learn how to use my Officejet J4680 printer all-in-one. Where can I find directions to the user for the HP Officejet J4680 printer? Thank you for responding.

  The user guide and other documentation for the Officejet j4680 can be downloaded here at HP.

• SonicWall ESA - adding users to the authorized address book

  What is the impact of adding users on our domain to the authorized address book? What is advised here? Thank you.

  Most often the adding internal users to the allowed list is a bad idea.

  A spammer can spoof the address match the purchaser and circumvent much of the scanning.

  If your seeing something that is to be taken should not be I open a folder and attach a copy of the message in the msg or eml format and a technician can determine the cause and the measures to be taken to correct.