Find the beginning and end of a month using get-date

Similar Questions

• Noise at the beginning and end of the songs?

  I get a humming sound for a split second at the beginning and end of the songs which can be heard at high volume.  The sound only comes from the left atrium.  I tried a few different pairs of headphones and get the same result, then it is definitely the Clip.

  It of just a feature of the Sansa Clip or is there something wrong with my drive?

  TIA

  I tried ripping the mp3 with two different programs, and it does not solve the problem.  Mind you, these are the same files of music that I had installed on my iPod Shuffle 2nd without noise.

  Today I bought another Sansa Clip and it does the same thing only for the straight path instead of the left.

  My conclusion is that it is an inherent problem with the Sansa Clip.  The reason why some of you can't hear this 'noise', I'm talking about is because I have the ears of a bat.

• At the beginning and end of the audio Volume control

  How to set the volume at the beginning and the end of audio?  So volume up slightly at full volume in middle to lower the volume and at the end of the audio?

  The f

  Each question is important if you do not have an answer for her. So please never hesitate to ask if you need clarification on anything I wrote or need additional information.

  With regard to the location of the Audio Mixer in first elements 11 Windows 8 64-bit (as for Windows 7 64 bit)...

  Access is under the Tools Menu at the top of the workspace Expert or Tools tabs at the bottom. Please refer to the screenshot

  

  In addition to what has already been post, here's some additional information about your questions.

  If you have not already seen, please check the excellent document Adobe 'Premiere elements/Audio Mixer and Volume control.

  http://help.Adobe.com/en_US/premiereelements/using/WS6C96BC86-7342-44a4-8D3F-936C1D66DE0B. HTML

  I think you'll do OK with the Audio Mixer Panel. But, you can explore keyframing the volume level of the audio element 'elastic '. It is the orange line which runs horizontally through the middle of the audio clip.

  a. hold CTRL of the computer main keyboard and the left mouse click on a place where you want to place a keyframe volume. You can do it in as many places on the rubberband if necessary. Then, with the mouse cursor, move the White points (keyframes) up or down to increase or decrease the volume to a location along the clip.

  

  Here's a blog I wrote about the video and the Audio Track Rubberbands (with graphic how) that should help you to correctly enter this particular workflow.

  http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html

  Thank you for the opportunity to help with your workflow in Premiere Elements. Screenshots are all first elements 11 Windows.

  RTA

• Mix the beginning and end of a single element?

  Hi - I'm fairly new to CC of the hearing. I have some samples of jet exhaust noise, in the form of .wav files saved. These files are from 0:04 to about 0:12 seconds in length and different depending on the State of the motor (idle, max, etc.).

  The problem is: I need to use these samples to create the ambient noise constantly running at the same volume all along. If I just loop the unique wave, the end of the wave file does not match how it started.

  I understand that I can fade the ends to create a smoother transition, but which lowers the volume - where in this scenario, I'm looking for the volume to be constant loop after loop after loop.

  Is there a way to blend at the end of an element so that it engages smoothly before the start of the next clip?

  Yes, it is a way to do it, but it's complicated bloody!

  You have to find the longest continuous section you can (IE no change at all) and loop that. Although the chances are that you will always hear the join. So what you do is take your section in loop and turn it into a single file. You take this file and place a copy of it under the original track, only offset by about 1/3 to 1/2 the length of the loop - 1/3 is quite good, because you can do it again, so then you have loads of overlapping samples. Chances are when you play together, they will blend more smoothly. You may need to experiment a little, but I'm sure you get the basic idea.

  If the samples are really short, then you make a loop of loops - a much easier way to extend that just stick several sections over and over.

  Otherwise, look for some samples longer - I'm sure there are some.

• My tabs seem strange today with no arrows at the beginning and end to see several tabs.

  The appearance of my tabs changed this morning. The green arrows at the end of end of beginning of the line of tabs have disappeared.

  The arrows appear when the tape to tabs is full, to allow the user to navigate too full, otherwise these arrows are not displayed.

• Points of beginning and end of a song seems to change at random in the Bounce dialog box

  Even if I put the departure and arrival within the project, when am I going to bounce the project the bounce dialog box displays the numbers of different from what I've specified. Everyone sees what is happening? Using X 10.2.1 Pro logic.

  The start and endpoints of a rebound are determined by:

  1 cycle. If a cycle is active when you give the command Bounce , then the start and endpoints of the cycle to determine the length of rebound.

  2 selection. If no cycle is active, but there are one or more area (s) selected, the early rebound and the end will be the selections start and endpoints.

  3. If no region is selected and the cycle is not active, then the beginning and end of the project are defined as the bouncing range.

  http://help.Apple.com/LogicPro/Mac/10.2/#/lgcp190ba9b7

• Breaking a year in coming weeks of beginning and end Dates (parameters) and first and last day of the month

  Hello people:

  I have currently a query that picks up all the weeks between a date range where my week starts on Thursday and ends on Wednesday. The following query works fine except that I need the week of beginning and end, from beginning and end Dates of months and the beginning and the Dates of end of the values of the settings, I'm passing. In this case, I chose January 1, 2013 to 31 December 2013.

  Any help or pointers would be great!

  Thank you!

  Problem: I am picking up days of December 2012 as the first week began on December 27, 2012. In addition, in December, I'm pretty much lost last week as well (26 December - 31 December).

  The request in hand:

  SELECT first_thursday + (7 * (LEVEL - 1))   AS week_start_date,
                   first_thursday + (7 * LEVEL) - 1    AS  week_end_date
  FROM
  (
    SELECT TRUNC(p_from_date + 4, 'IW') - 4   AS first_thursday, -- Week should start the pre ceeding THURSDAY based on the Start Date
                    TRUNC( p_to_date + 4,  'IW') - 5     AS last_wednesday
    FROM
    (
      SELECT to_date('01-JAN-2013') AS p_from_date,
                      NVL(to_date('31-DEC-2013'), SYSDATE) AS p_to_date
      FROM     dual
    ) parms
  ) end_points
  CONNECT BY LEVEL <= ( last_wednesday + 1 - first_thursday)/7;
  

  Currently, this is the result I get (I'm only including the months of January and December here).

  Week_Start_Date     Week_End_Date
  27-DEC-12                02-JAN-13
  03-JAN-13                 09-JAN-13
  10-JAN-13                 16-JAN-13
  17-JAN-13                 23-JAN-13
  24-JAN-13                 30-JAN-13
  31-JAN-13                 06-FEB-13
  

  December:

  28-NOV-13               04-DEC-13
  05-DEC-13              11-DEC-13
  12-DEC-13              18-DEC-13
  19-DEC-13              25-DEC-13
  

  What I would really like is based on start and end Dates, as well as the first and the last day of the month is similarly try nicely. I have provided and then gently break at the end of the month:

  January:

  01-JAN-13              02-JAN-13
  03-JAN-13              09-JAN-13
  10-JAN-13             16-JAN-13
  17-JAN-13             23-JAN-13
  24-JAN-13             30-JAN-13
  31-JAN-13             31-JAN-13
  

  February:

  01-FEB-13    06-FEB-13
  07-FEB-13    13-FEB-13
  14-FEB-13    20-FEB-13
  21-FEB-13    27-FEB-13
  28-FEB-13    28-FEB-13
  

  November:

  31-OCT-13    06-NOV-13
  07-NOV-13    13-NOV-13
  14-NOV-13    20-NOV-13
  21-NOV-13    27-NOV-13
  28-NOV-13    04-DEC-13
  

  December:

  01-DEC-13           04-DEC-13
  05-DEC-13           11-DEC-13
  12-DEC-13          18-DEC-13
  19-DEC-13          25-DEC-13
  26-DEC-13          31-DEC-13
  

  Hello

  Roxyrollers wrote:

  Hello people:

  I have currently a query that picks up all the weeks between a date range where my week starts on Thursday and ends on Wednesday. The following query works fine except that I need the week of beginning and end, from beginning and end Dates of months and the beginning and the Dates of end of the values of the settings, I'm passing. In this case, I chose January 1, 2013 to 31 December 2013.

  Any help or pointers would be great!

  Thank you!

  Problem: I am picking up days of December 2012 as the first week began on December 27, 2012. In addition, in December, I'm pretty much lost last week as well (26 December - 31 December).

  The request in hand:

  1. First_thursday SELECT + (7 * (LEVEL - 1)) AS week_start_date,
  2. first_thursday + (7 * LEVEL)-1 AS week_end_date
  3. Of
  4. (
  5. SELECT TRUNC (p_from_date + 4, 'IW') - 4 AS first_thursday,-week should start to perform the pre-mounted THURSDAY based on the Start Date
  6. TRUNC (p_to_date + 4, 'IW') - 5 AS last_wednesday
  7. Of
  8. (
  9. SELECT to_date('01-JAN-2013') AS p_from_date,
  10. NVL (to_date('31-Dec-2013'), SYSDATE) AS p_to_date
  11. OF the double
  12. ) parms
  13. ) end_points
  14. CONNECT BY LEVEL<= (="" last_wednesday="" +="" 1="" -="">

  Currently, this is the result I get (I'm only including the months of January and December here).

  1. Week_Start_Date Week_End_Date
  2. DECEMBER 27, 12 2 JANUARY 13
  3. JANUARY 3, 13 JANUARY 9, 13
  4. 10 JANUARY 13 JANUARY 16, 13
  5. 17 JANUARY 13 23 JANUARY 13
  6. 24 JANUARY 13 30 JANUARY 13
  7. 31 JANUARY 13 FEBRUARY 6, 13

  December:

  1. NOVEMBER 28, 13 4 DECEMBER 13
  2. 5 DECEMBER 13 DECEMBER 11, 13
  3. 12 DECEMBER 13 18 DECEMBER 13
  4. 19 DECEMBER 13 DECEMBER 25, 13

  What I would really like is based on start and end Dates, as well as the first and the last day of the month is similarly try nicely. I have provided and then gently break at the end of the month:

  January:

  1. JANUARY 1, 13 2 JANUARY 13
  2. JANUARY 3, 13 JANUARY 9, 13
  3. 10 JANUARY 13 JANUARY 16, 13
  4. 17 JANUARY 13 23 JANUARY 13
  5. 24 JANUARY 13 30 JANUARY 13
  6. 31 JANUARY 13 JANUARY 31, 13

  February:

  1. 1ST FEBRUARY 13 FEBRUARY 6, 13
  2. 7 FEBRUARY 13 FEBRUARY 13, 13
  3. 14 FEBRUARY 13 FEBRUARY 20, 13
  4. 21 FEBRUARY 13 FEBRUARY 27, 13
  5. 28 FEBRUARY 13 FEBRUARY 28, 13

  November:

  1. 31 OCTOBER 13 NOVEMBER 6, 13
  2. 7 NOVEMBER 13 NOVEMBER 13, 13
  3. 14 NOVEMBER 13 NOVEMBER 20, 13
  4. 21 NOVEMBER 13 NOVEMBER 27, 13
  5. NOVEMBER 28, 13 4 DECEMBER 13

  December:

  1. 1ST DECEMBER 13 DECEMBER 4, 13
  2. 5 DECEMBER 13 DECEMBER 11, 13
  3. 12 DECEMBER 13 18 DECEMBER 13
  4. 19 DECEMBER 13 DECEMBER 25, 13
  5. 26 DECEMBER 13 DECEMBER 31, 13

  Why the "weeks" in November, have all 7 days, while the "weeks" in the first or the last week in the other month usually have less?  (For example, February 28 is a 'week' alone.)

  The following works for the other months:

  WITH all_days AS

  (

  SELECT DATE "2013-01-01' + LEVEL - AS a_date 1

  OF the double

  CONNECT BY LEVEL<=>

  )

  SELECT DISTINCT

  More GRAND (TRUNC (a_date + 4, 'IW') - 4)

  , TRUNC (a_date, 'MONTH')

  ) AS week_begin

  , The LEAST (TRUNC (a_date + 4, 'IW') + 2

  TRUNC (LAST_DAY (a_date))

  ), Week_end

  Of all_days

  ORDER BY week_begin

  ;

  Output:

  WEEK_BEGIN WEEK_END

  ----------- -----------

  January 1, 2013 January 2, 2013

  January 3, 2013 January 9, 2013

  January 10, 2013 January 16, 2013

  January 17, 2013 January 23, 2013

  January 24, 2013 January 30, 2013

  January 31, 2013 January 31, 2013

  February 1, 2013 February 6, 2013

  February 7, 2013 February 13, 2013

  February 14, 2013 February 20, 2013

  February 21, 2013 February 27, 2013

  February 28, 2013 February 28, 2013

  ...

  November 1, 2013 November 6, 2013

  November 7, 2013 November 13, 2013

  November 14, 2013 November 20, 2013

  November 21, 2013 November 27, 2013

  November 28, 2013 November 30, 2013

  December 1, 2013 December 4, 2013

  December 5, 2013 December 11, 2013

  December 12, 2013 December 18, 2013

  December 19, 2013 December 25, 2013

  26 December 2013 31 December 2013

• change the properties of the report axis (together begin and end)

  Hey everybody,

  I am a beginner with DIAdem reports and close to despair that I have yet found any solution.

  I wrote a script, which produces reports of various measures with 9 pages (3 2D-slots each, a total of 27 lots).

  Now, I want to put the beginning and the end of the x-axis of certain specific parcels.

  First question: tiara offers something similar to an Object Explorer (for easy access to the names of the objects drawn in a report)?

  I created two GlobalDims called x_time_begin and x_time_end to set these properties, but I don't know how to access these variables in the report (tried @... @ and @... @ the 'Axis settings' tab).

  These variables change for each measure, so each report has a different set.

  The presentation of the State is responsible from a set of. TDMS files and is not altered in the script.

  How can I find the name of a specific plot in the report can access?

  Is it possible to define the range of the x-axis in a variable at all?

  Best regards

  Nils

  Hi Nils,

  It is possible to set the x-axis of begging and positions in the scripts end (see text below).  When you create a report object in the script you can name it anything you want to access later. Otherwise, I think that the default name is the name of the object, of the number (for example the 2D first table is called "2DTable1")

  Dim oMy2DAxisSystem, oMyXScaling
  
  Report.NewLayout
  
  Set oMy2DAxisSystem = Report.ActiveSheet.Objects.Add (eReportObject2DAxisSystem, "My2DAxisSystem")
  
  Set oMyXScaling = oMy2DAxisSystem.XAxis.Scaling
  
  oMyXScaling.AutoScalingType = eAxisAutoScalingManual
  
  oMyXScaling.Begin = 0.01
  
  oMyXScaling.End = 100

  Hope that helps,

  Sadie

• Disable the auto connect the beginning and the end with brush

  Hello! This is my first post. And maybe it's a stupid problem.

  I can't find a solution online. Maybe because I don't know what it is.

  So when I triple tap and make a related on my Wacom tablet, it connects the beginning and the end as follows:
  I don't know if it's the tablet or photoshop.

  

  You aren't the only one with this problem. If you search this forum you will find others also have this problem. I don't. I've seen any solution to the problem. Ons suggestion that I've seen is to disable the double distance tap in preferences of Wacom pen.

  https://forums.Adobe.com/search.jspa?place=%2Fplaces%2F1413024&sort=updatedDesc&q=Wacom+Li not

• Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.

  Firefox 4 is unable to install add-ons. After download the 'installation' bar stuck in the beginning and never ends.
  After that I updated to 3.6, FF4 to see any of my previous modules.
  When you try to install the new, I see no error dialog box or message, just install bar is not going anywhere.

  To anyone out there yet with this issue.
  The solution that worked for me was to create a new user profile.
  Give it a try, if it works you can just move your settings and other things more.
  Oli

• 39L4363D - cannot set the record time of beginning and end of filling time

  Hello

  I have a problem with my 39L4363DG tv (software 7.1.90.34.01.1).

  I'm not able time of filling time of beginning and end of record setting as described in the [Manual | http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. The menu item "padding-start" and 'end padding time' are disabled?

  Can someone help me and give me advice on how to solve it?

  Hello

  The charging time can be set for the scheduled recording.

  There is also a priority planning
  If the regular time intervals are ensuites to each other and there is more than one minute between the time of the end of the annex i and the next scheduled start time, scheduled recording will be performed correctly.

  When + start time of filling + and + hour of end padding + are value, the start time and end time more is the time the extra minutes.

  If planning time overlap, priority will be given to the scheduled recording starts first.
  When the scheduled recording that began the first ends, recording will switch to the next regular program.
  At that time, according to how much programming time to overlap, the section from the beginning of the next regular program is not registered.

• Beginning and end of the week according to YYYYWW

  Hi all
  
  I have a date like format
  
  201050
  201051
  201052
  201101
  
  I wanted to display their dates of beginning and end of the relevant year - week.

  SQL> with t as (
    2   select 201050 yw from dual union all
    3   select 201051 from dual union all
    4   select 201052 from dual union all
    5   select 201101 from dual union all
    6   select 201102 from dual
    7  )
    8  --
    9  --
   10  select yw, trunc (trunc (to_date (substr (yw, 1, 4), 'yyyy') + 7, 'iyyy') + 7 * (substr (yw, 5) - 1), 'iw') start_dt
   11    from t
   12  /
  
               YW START_DT
  --------------- -----------
           201050 13/dec/2010
           201051 20/dec/2010
           201052 27/dec/2010
           201101 03/jan/2011
           201102 10/jan/2011
  
  5 rows selected.
  
  SQL>
  

• Highlighted the beginning and the end of the html tag

  [En]: Hello all,.

  I wonder if it is possible to display the start and end of an html tag set highlight (or with a different background) when it is activated.

  THX

  Sorry for my English.

  _________________________________________

  [En] Hello to all and all,

  I would like to know if it is possible to display the start and end of a tag html highlighted (or with a different background) when this one is selected.

  Thank you

  In English: In Code view, select the parent tag.  See screenshot below.

  English: In Code view, select parent tag. See screenshot below.

  

  Nancy O.

• Beginning and end of check date

  Hello
  
  I have a requirement to find a list of people that have dates that overlap.
  
  Each person can have several Dates of beginning and end, but only one line that has a null term, the current record. If the start and end dates are overlapping, as in the example below, the second row should have a start date of December 24, 2006 and 22 December 2006. Is it possible to list people who have dates and gaps that overlap in the dates.
  
  Empl_ID Start End Date
  12345 1 JANUARY 2006 DECEMBER 23, 2006
  12345, DECEMBER 22, 2006 13 JANUARY 2007
  12345 NULL JANUARY 14, 2007
  
  Any help is greatly appreciated.
  Thank you!

  Hi Patrick
  I like where you're coming. I hope you don't mind but I have extended your idea slightly to add in a PARTITION BY clause to make sure that we look at the records for the same person. Also, if we LAG for a previous record shouldn't we us DRAGS the end_date and compare it with the current start_date?

  LAG(END_DATE,1) OVER (ORDER BY START_DATE EMPL_ID PARTITION)

  In doing so, then the results would look like this:

  Empl_ID Start Date End Date Lag
  12345 1 JANUARY 2006 23 DECEMBER 2006 NULL
  12345 22 DECEMBER 2006 JANUARY 13, 2007 DECEMBER 23, 2006
  12345, 14 JANUARY 2007 NULL JANUARY 13, 2007

  This would give the SIGN a problem because in the first record, the OFFSET would be NULL and the last record the end_date would be NULL. So, it seems that some handling of NULL values must be as well which I will deal with later.

  SIGN ((LAG(END_DATE,1) OVER (ORDER BY START_DATE EMPL_ID PARTITION))-START_DATE)

  At all times the difference between the Start Date and the Date of Lag is positive, this means, that there is an overlap which means that we must look for any gap where the SIGN is 1.

  Using the other function, we could use the LEAD like this:

  LEAD(START_DATE,1) OVER (ORDER BY START_DATE EMPL_ID PARTITION)

  In doing so, then the results would look like this:

  Empl_ID Start Date End Date lead
  12345 1 JANUARY 2006 DECEMBER 23, 2006 DECEMBER 22, 2006
  12345 22 DECEMBER 2006 JANUARY 13, 2007 JANUARY 14, 2007
  12345 NULL NULL 14 JANUARY 2007

  When combined with the SIGN becomes: SIGN ((LEAD(START_DATE,1) OVER (PARTITION OF EMPL_ID ORDER start_date)) - end_date)

  This time you would look at the sign at-1

  Personally, I think that I would prefer the LEAD function because one) there will always be a start_date and b) we could replace all possible NULL values with the SYSDATE to get a final calculation like this:

  SIGN (NVL (LEAD(START_DATE,1) OVER (PARTITION BY ORDER OF START_DATE EMPL_ID), TRUNC (SYSDATE))-NVL (END_DATE, TRUNC (SYSDATE)))

  Based on the date is November 17, 2009, you would now get this result:

  Empl_ID Start Date End Date lead
  12345 1 JANUARY 2006 DECEMBER 23, 2006 DECEMBER 22, 2006
  12345 22 DECEMBER 2006 JANUARY 13, 2007 JANUARY 14, 2007
  12345 JANUARY 14, 2007 NOVEMBER 17, 2009 NOVEMBER 17, 2009

  Best wishes
  Michael

• Mobsync.exe begins and ends several times when running directX games

  Whenever I start a current game directx mobsync.exe enforcement begins and ends. It causes a shift in the game and the cheek than the "dee-dum' sound as if I am connect and disconnect a USB device. I changed everything in the system for material. New motherboard, new RAM, different video card, changed to keyboards and mice, disconnect all USB devices and the problem still persists. Mobsync.exe will begin or wmplayer will start then end immediately and that this repeatedly until the game is closed. does anyone have any idea what this might be? Help, please! It's very frustrating.

  Intel Core 2Duo

  ATI Radeon HD3650 PCIE16

  4 GB OF DDR3 MEMORY

  Finally I thought of her. The problem was with a compatibility problem with a USB display controlled on a case of SilverStone Media Center. I found this through the process of elimination. After unplugging the screen before the problem disappeared.