FireSight/SourceFire IPS licenses

Similar Questions

• ASA 5500 x IPS license to the license of firepower

  I recently attended a webcast Cisco and told me that it is possible to obtain a free migration since the IPS license inherited the firepower license if you have a 5500 Series x ASA.  Nobody is able to successfully get the free conversion?

  There is a program of technological Migration offering that gives a discount on upgrades, but I have not heard of any offer of free migration.

• License FireSIGHT - ASA IPS

  Hello

  I currently installs a virtual appliance of FireSIGHT to manage installed with fire services ASA 2.

  My Defense Center is an appropriate license, using the key PAK I got.

  I bought 2 IPS for two of the ASA subscription licenses.

  I have configured the Manager on both devices of sourcefire and added to the centre of defence.

  Now, my problem is: I can't attribute any IPS policy because there seems to be no licenses installed on the domain controller to be applied to devices...

  My question is: what I have to buy additional licenses for the domain controller for the IPS features (Protection) or do I missed something here? :-)

  Thank you very much

  Kind regards

  Hello

  As Marvin commented, you will have a license CTRL "ASA5525-CTRL-ICA" accompanying the device through a certificate of claim. On the certificate, you should see a number PAK and steps to save to get the license. Please follow these.

  If you have purchased a = L - ASA5525 - TA - LIC, then that gives you the right to obtain updates to signature for CONTROL-PROTECT features. There is no PAK or license for this PID.

  -DD

• SourceFire IPS updates

  We are developing a new firewall with IPS SFP modules in them that will be managed by an application of SourceFire Security Center (1500 series)

  I know with the old IPS systems, modules would get their updates of signature directly. Now they get their updates of software and signature of the Management Server? (this would make things a lot easier)

  Hello Colin

  Yes, your Firesight Management Center Gets all the updates rules and Intrusion policies get updated and redeployed to your probes.

  HTH

  Paul

• Sourcefire IPS throughput

  Hello.

  Cisco provides that Sourcefire 8140 can go up to 6G, up to 10G 8250 and 8360 can go up to 30G. Is it true values?

  Someone at - he of the values of real throughput with license service IPS and APPs? I know that this flow can be different from the same unit in different circumstances; but I'm being advised to buy a 8360 for a flow 6 Giga and I think 8250 should be sufficient. I expect 20-30% less bitrate not 80% less.

  Anyone with experience on that?

  Thank you

  João Carvalho.

  These numbers are the flow you will get if you only IPS. Including control of applications (I guess that's what means 'APPs') and the discovery of the network would take the expected of a 8140 2.5 Gbps throughput.

  I suggest to go with one on a 8200 8300 as the former has all but replaced by.

  You must work with your security account manager to identify your needs and get a recommendation on which device should be.

• Sourcefire without license

  Dear team,

  When I added the ASA5515X-FPWR-K9 model to my (DC) FireSight, I received unlicense on my product, while my DC already add TAMÁS.

  When I go to the devices--> Device Management--> showing as unlicensed product (the case as I already added all the licenses in DC)

  but when I try to edit (in devices) but still, I am not able to check the licensing part it contains.

  Please find the attached screenshots for reference.

  Unlicensed.jpg

  

  unlicensed - 1.jpg

  

  license - details.jpg

  

  Help please give me some advice.

  Thanks in advance,

  Mr. Mistry MILIN

  There is no license for a 5515 in your screenshot. You need to apply a license that matches your platform of firepower to the MC FireSight.

• 0 of 50000 FireSIGHT host remaining licenses

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

  This means that you have not discovered active user.

  Come on the discovery network/policies.

  If you have a defined "local" network and clock on the "pencil" or double click.  Next to 'The Action' at the top, click on "users".  Save and deploy.

  If you do not have a 'local' defined network, add a network as 'IPV4-private-All-RFC1918' and then repeat the steps above.

• Duration of lock FireSIGHT/SourceFire user configuration?

  Hi all

  I've been searching in the documentation for 5.3 and 5.4, and I don't find no information for what the account lockout duration is for when a user does not have the number of logins set to the value of maximum number of connections has failed in a user account. Is there an official documentation anywhere for this (and where to check or raw balls does show a lock-out)? I have a client through a PCI DSS audit and the auditor is demanding this information. Either way, it seems that the default Administrator account cannot be disabled (the Setup Guide explains he cannot be deleted, but can it be disabled via the CLI)?

  Appreciate any help you can provide.

  Thank you

  Richard

  Hello Richard,.

  External authentication would be the only way to get the limit past reuse.

  To get locked, you must enable STIG this will allow locking of accounts, other than that there no way to do it without STIG.

  I'll open a bug in development of your request to add this feature in the road map.

  Assess and correct if my message will help.

  Concerning

  Jetsy

• License key of Sourcefire for test

  Hello

  Is it possible for partners to request trial for Sourcefire products license?

  I just downloaded Sourcefire for VM on Cisco software, but do not know how to apply for a license. Just after the cisco.com/go/license

  Thank you.

  Hello

  Please join your CEC Contact to generate the demo/EVAL license

  V.Dhanasekaran (DD)

  SourceFire business analyst

• Host Firesight license limit

  Hello world

  I see this alert in the center of the defense healthcare

  Module FireSIGHT host license limit: you have 0 off FireSIGHT 2000 remaining licenses of the host
  Monitor module license: DC750: number of HOST used exceeds total by 9 licenses.

  Host here means number of PC?

  Concerning

  Mahesh

  This means that the number of addresses to end host seen by your FireSIGHT Management Center. This can include PCs and any other IP address whose traffic has been observed through the CMF.

• IPS-4240 Sig Update License

  Is this not the right part. the update of the GIS 4240 IPS license?  CON-SUSA-IPS4240S

  I can only find this part number in the ordering tool: CON-SUI-IPS4240, which also has a SMARTNet Support?

  What is do we need just to have updates of GIS?

  Thank you

  You cannot buy a stand-alone appliance IPS IPS subscription.

  You can buy either of the following:

  (1) CON-SUI-IPS4240 for example which includes Smartnet for hardware, software, and the IPS subscription.

  OR /.

  (2) CON-SUSA-IPS4240 contracts are sold only to customers who have purchased a support hardware and software through a reseller/partner contract.

  CON-SUSA... cannot be sold on its own, it must be sold in conjunction with the reseller/partner support contract.

  Hope that helps.

• How to restore the configuration in new FireSIGHT (device RMA)?

  How to restore the configuration in new FireSIGHT (device RMA)?

  FireSIGHT need new license again or not?

  Licenses are issues associated with the license key of the management FireSIGHT pole. The key is a combination of the type platform (model) and the MAC address of the server.

  So, Yes, you will need more reissued. The case of the TAC which obtained you the RMA can serve as the basis for a request to the team of licensing for the reissue.

• Sourcefire Appliance virtual Fail Open?

  Hello

  Is it possible for sourcefire IPS appliance can fail open? I guess this would be a definite no, but I can't find a reference to this anywhere.

  Thank you.

  It is an emphatic "no"

• SourceFire Cisco

  Hi, someone has some disadvantages-pro between SourceFire IPS (now acquired by Cisco) and run Cisco ASA IPS?

  Thank you, S.

  Hi Philippe,.

  The following link might be useful,

  http://www.Cisco.com/Web/about/ac49/AC0/ac1/ac259/Sourcefire.html# ~ FAQs

• IPS on the version of cisco 2911 (15.0 (1) M3)

  Hello

  Could someone guide me please? I'm under cisco 2911:

  ********************

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  IPS license status: not installed

  Current date: October 8, 2011

  Expiry date: not available

  Date of extension: not available

  Loading signatures: not available S0.0

  Signature package: not available S0.0

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  ******************

  When I run the show ip ips:

  IPS license status: not installed
  Current date: October 8, 2011
  Expiry date: not available
  Date of extension: not available
  Loading signatures: not available S0.0
  Signature package: not available S0.0

  Do I have to buy a license for software only, or should I buy a saparate for IPS module work?  How would the license be about?

  Help

  You can run IOS IPS on the 2911 router, however, you must purchase the license IOS IPS to be able to run the IOS IPS feature. Not sure how the license, it is best if you ask Cisco reseller/partner and they would be able to help others with a price.