FireSIGHT on ESXi6 management

Similar Questions

• FireSIGHT Eval License Management Center

  Y at - it licensed Eval of 60 days for the FireSIGHT Management Center? If so someone has the link to it so I can get one for my client? Thank you.

  If you are a partner, you can follow evidence security of value (POV) available on the security clearance process partner community.

  See the next page of the procedure:

  https://communities.Cisco.com/docs/doc-55301

  (Not a public or oriented customers link - access level partner required)

• Firesight Management Virtual Center in ESXi version 6

  Hi all

  Is it possible to install any version of virtual appliance Firesight Management Center of vmware ESXi 6?.

  Thanks and greetings

  I have not tried it personally - it may be possible to install.

  However ESXi 6.x is not a supported platform yet. Even with the power of fire (new name for FireSIGHT) recently published Management Center 6.0, the supported versions of ESXi are 5.1 and 5.5.

  The source of this information is the Release Notes:

  http://www.Cisco.com/c/en/us/support/Security/Defense-Center/products-re...

• Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

  Are the settings and policies of an ASA local with shattered fire or power of substitution to the addition of the device that will be managed by the management center of FireSIGHT? I have an ASA that works stand-alone with FP and now need to add FireSIGHT Defense Center/Management Center without losing existing policies.

  Thank you.

  Simply adding as successful will not overwrite the local policies of the firepower of the ASA module gave.

  However, as soon as you deploy any policy (access control, Intrusion, file), healthcare etc. Since FireSIGHT Management Center it will overwrite the one on the SAA.

  You can export one local by using the ASDM Manager and then import it into FireSIGHT for re-deployment as a management centrallly policy.

• Configuration and installation of SourceFire ASA

  Hello team,

  Recently, we have installed the SourceFire ASA-based software but its not in production, but now we intend to get SourceFire ASA production for the management of traffic and URL filtering. Right now, we have the FireSight of installation management system and uploaded image of SFR to ASA. Now ASA will exercise traffic of internet entry/exit point to our network. I have some doubts as follows:

  (1) ASA I see sfr module is in place, but what happens if I console module sfr this will affect my normal Internet traffic while I'm in the console of sfr.

  (2) are there models of basic configuration for the url filtering to make the job easier.

  (3) what are the control list to cross check before get sfr inline module in production.

  Thanks in advance for your help.

  Thank you - Jadesh

  Redirect us traffic to the fire power module using the modular policy framework for something like this:

   policy-map global_policy class class-default sfr fail-open service-policy global_policy global

  Generally, what you do on the console of sfr module do not affect the parent ASA. Until you have the policy to redirect traffic nothing will pass or affect by the module of sfr. As long as you have the 'rescue' the sfr descending module or the reset does not affect production ASA traffic.

  Of course once you run traffic through it and start applying policy, you have the option to block or otherwise affect this traffic.

  Beyond the user and Admin guides, you can take a glance series Lab Minutes that was done recently. They do a good job of walking your through basic tasks.

• Firepower - High CPU and latency

  Hey

  IM under firepower with a 5555 X. The FireSIGHT console to manage using.

  When sending one of our internet connected interface through the CPU power of fire leaped up 25-30% on the SAA and the latency rises with 40-150ms.

  I need to know what is the cause, Cisco licenses is expensive and I didn't know HW would pose a problem.

  The problem is worse when traffic increases. When you reach 600-700mpbs the ASA thus removes the packages.

  Thanx.

  You are very lucky if you can push 600-700Mbit/s through the FP module in your X-5555.
  With functionality STROKE and IPS, it is evaluated to 450Mbit/s, yet further with the URL and the amp on.

  If you need the functionality of the ASA, you should go with either:

  5585-X SSP EP 10/40

  SSP 5585-X 40

  5585-X SSP EP 20/60

• For IPS 7120

  IPS FB7120 support underneath or not: -.

  (1) mounting fragmented packets and rebuilt streams to check attacks.

  (2) support the ability to search the user defined signatures.

  Support encryption 3) between the network intrusion detection sensor and its collector of management station or an event.

  1. Yes.

  2. Yes - you can create signatures of clients although the signatures provided by Cisco are usually more than adequate.

  3. Yes. The sensor to the management station (FireSIGHT / fire power management center) communications are via SSL/TLS.

• Power of fire vs NGIPS vs FireSight vs power of fire management center

  I am struggling to understand the distinction between these terms. Is anyone able to help me understand what are the components?

  Firepower is the term that Cisco uses during most of the acquis of Sourcefire products.

  FMC

  Power of fire aka Firesight Management Center aka Defense Center Management Center.
  Power of fire management centre was re-branded twice, its all the same

  Centralized management for devices of firepower (NGIPS, Module of ASA firepower, DFT)

  NGIPS

  Dedicated appliance IPS / IPS component of the solution of firepower (also used on the firepower of ASA and DFT module)

  ASA with power of Fire Services

  ASA with module of software/hardware that is running the services of firepower. (is two different images running on the same box. Traffic is redirected to the module of firepower for Layer 7 inspection)

  FTD

  Power of fire Threat Defense is the new unified combining image Software ASA and firepower into a single image. (not full parity of features to ASA still)

  If you need more let me know.

• FireSight Managment

  We recently got a quote for a pair of HA 5506 with firepower and was surprised to see that it included a virtual machine for the FireSight management application.  I heard of some people that the virtual machine is not necessary and that we can run on the SAA management application.  Is this true and if so how well it will happen.  There is a lot of benefit to the virtual machine running on a host ESX versus on the ASA?

  The ASA will be used for web traffic in general of the staff of the Office out to the internet.  There will be no internal sites with NAT static is configured on this ASA.

  My recommendation is that fire power AMPS-based management is only good for lab or single device installations.

  Even on a basis HA pair, if you use ASSISTANT Deputy Ministers approach, you must replicate each change on both units since they have no knowledge of the other and do not synchronize the configuration of firepower as the base ASA fact...

• Cisco Firesight time management center

  Hello

  Is it possible to change the time on Cisco Firesight Management Center after that I'm done with the initial configuration. I need to change the time zone again as it has been set to an incorrect value, and I can't find an option to do so.  We manage the system on an ESXi and I can access the CLI console as well

  Kind regards

  IT is defined by the user (top right of the CMF GUI)) > user preferences > time zone preference.

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• Management of FireSight, is it really necessary

  Hi team - I propose two 5525 with services of firepower.  Question is, do I really need to order Firesight Manager?  Can't be done the same with ASSISTANT Deputy Ministers.  The implementation of work without the accustomed Firesight Manager.

  B

  I agree with Philip to get the 5516 vs 5525 but would also like to add a few things:

  1 ASDM can handle firepower on all the X series firewalls. It was introduced along with ASA version 9.5 and 7.5 ASDM:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASDM/7_5/release/notes/RN75.html

  2. it is strongly recommended that you get FireSIGHT. FireSIGHT you perform the discovery network, recommendations of the IPS, to correlate events, generate reports, set alerts, etc. The IMO FirePOWOR without FireSIGHT isn't a good solution.

  I hope this helps!

  Thank you for evaluating useful messages!

• TIME BASED ACLS ON FIRESIGHT MANAGER

  Dear all,

  We use the power of fire management center Cisco for VMWare. In which we have created several rules under strategies--> access control. But we want to run some rules under the defined time interval. Can anyone please help on this configuration.

  screenshot is attached.

  Thank you very much.

  Raja,

  Sorry, but this feature is not currently available.

• Virtual Firesight Management Center (Sourcefire_3D_Device_Virtual64_VMware - 5.3.0 - 571) inaccessible via the web page

  Hi, I installed Sourcefire_3D_Device_Virtual64_VMware - 5.3.0 - 571 on vmware ESXi 5.0, installation was ok, I can ping and ssh Sourcefire_3D access but I am not able to access via Internet Explorer or Firefox.

  I see with wireshark who receive the Sourcefire_3D package from the client browser, but is not full 3 - way handshake.

  I use my laptop with Windows 7 64-bit, with vmware workstation v. 10.0.4 and ESXi 5.0.0.

  any suggestion?

  concerning

  Antonio

  You are welcome.

  Please take a moment to assess your question as answered.

  See you soon!

• Blocking of hosts using Firesight and firepower

  I was curious if there is a section in firesight where it could be programmed to block hosts like CISCO host IPS blocks section? A bit like the list hosts blocked for triggering the signatures. Try to translate this into the new product.

  In addition, in the event action filters. One possibility might be a rule of trust in the correct access control strategy?

  Hello

  Access control strategy is intelligence Security tab that allows you to block connections to/from any IP address you put into the black list. You could also simply connect instead of block by enabling logging and changing the drop to monitor action.

  Security Intelligence is configurable by access control policy.

  Under management of the object, in the section, you can also import the .txt file based containing IP addresses or create one if feed to a server where the .txt file is hosted.

  A rule of confidence action implies that you will perform inspection of traffic that matches your rule conditions.

  Hope this helps

  Paul