First Pro CS5.5 using 25% of CPU when closed?

Similar Questions

• First Pro CS5 never uses more than 15% of CPU, so perform much more slowly than first 6.5!

  Hello.

  I make videos of marriage for a while. My material included map DV500DVD and first 6.5 CPU Core 2 Duo E8400, 2 GB of RAM, Windows XP SP1 (DV500 does not work with SP2 or SP3).

  The above system is quite old and absolutely not usable for HD videos. So, I decided to build another machine. The configuration is the following:

  OS: Windows 7 Professional 64 bit.

  M/b: Asus LGA 1155, H67 chipset.

  CPU: Intel Core i7 - 2600K

  RAM: 4 GB DDR3

  HARD drive: 2 x 64 GB SSD, 2 TB SATA (RAID) 4 x (all drives connected to separate the controller PCI-E chipset fault intel isn't a problem here)

  I recently downloaded and installed the first Pro CS5 trial version, to see how he adapts to my needs. And I'm very disappointed. I started the first, chosen preset widescreen DV, inserted two static images on the timeline and made a mix alpha between them. Then put movie export. Not only it took too long to make, but it only used a nucleus, and the CPU usage is only 15%. Just out of curiosity, I installed first 6.5 on the same system, and he did this task about 10 times faster!

  That is, limitation of the trial version, or just first Pro CS5 cannot be used with this modern processor?

  Thanks in advance,

  Alex

  I can understand your experience... After I installed Windows 7 and CS5 Production Premium, adding another 8 Gig of Ram for my PC, dying on the fact that my Nvidia Quadro FX 4600 is not able to use the reading mercury and literally hours of waiting for spending returns, on a hunch, and after reading about someone else who did the same thing.  Finally, I took my old PP CS3 and installed on alongside first CS5. To my surprise, with 64-bit OS, CS3 running and makes exactly the same content about 4 times faster, does not idiosyncratic seizures slow when moving clips in the timeline, no white on the error screen "not responding" messages, etc.etc. I have no problem with After Effects or Photoshop CS5, they work fine, but first CS5 is close not functional as it gets. A: 30 minutes with some effects of magic bullet, even native capture HDV format takes about 10 minutes with PPCS3... and about 45 minutes with CS5. CS3 also reads smoother and barely stutters, so that I have to sit and to return with CS5 because of choking in order to continue working. One post suggested that I don't have enough gas in the machine, dual core AMD Opterons 3.2 GHZ, disks, 16 Gig ram working 7200 and 10 000 rpm... but cannot see how CS5 can maybe make CS3 on the same stage. What I'm missing here? I'm not whining just baffled.

• First Pro CS5.5 using 50% of the processor to Render?

  I just downloaded and installed Adobe first Pro CS5.5 and when I go to make the video it uses only 50% of the CPU power. I did not have this problem in CS5. Is there some sort of setting I need to change? Any help will be great, thanks!

  Your probably having to define the pp optimized for Proccesor not for ram.

• using first pro cs5.5, when I opened the project opens as first cloud creative pro and asks me to renew my subscription which was canceled less than a year ago help needed please keith

  Why my project first pro cs5.5 opened as creative cloud when I do subscribe to creative cloud keith

  Thank you for your help no I don't have any apps cc on the computer, but what I did to restore to a previous date pre windows 10 and that seems to have solved the problem many thanks again keith

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CS5 'Install' is damaged

  Hello!

  I'm unable to install the first Pro CS5, the disk appears to be damaged. I've been using Illustrator, Photoshop, Indesign, AfterEffects CS5, I admit they get more glitchy with age (closing suddenly)- so I don't know if it's a technical problem with my computer, or maybe I do not download the right choice? I downloaded the program by clicking on Download Adobe Creative Suite 5 products. I would appreciate help. Thank you!

  FYI: I have a MacBook Pro (early 2011), OS X El Capitan Version 10.11.3, processor 2.3 Ghz Intel Core i7, 8 GB memory, AMD Radeon HD 6750 M 1024 MB graphics card.

  

  CS5 is released before the security feature of the CMA, requiring Gatekeeper by default app be sign before they will be installed.

  The solution is to temporarily disable this functionality in security & her preferences setting "Anywhere", before you open the .dmg and running the installation.

  

• NVIDIA GeForce GTX 750 first Pro CS5 compatibility

  NVIDIA GeForce GTX 750 4 GB DDR3

  I'm on the purchase of a new pc that has this pre-installed video card.

  Do you know if its compatible with First Pro CS5 and the rest of the programs in this collection:

  Still, After Effects, Photoshop, Illustrator etc. ?

  You enjoy letting me know that the new machine is not cheap and I want to make sure.

  I use Windows 7 Pro.

  Thxs.

  The CUDA Hack:

  enable CUDA?

• I think I need to re install off my disks again. When I ask first Pro CS5 to send my project to again, still opens but did not receive my film sequence. How can I re install again only without upsetting my film?

  Hello. I have following first Pro CS5 on Windows. Can you advise me how do to re install again off my records without affecting any of my Premier Pro film please?

  I ask Pro send the sequence of film through dynamic links in again so that I can burn the movie to a disc.

  Still doesn't open, but the sequence did not arrive to Pro.

  Last night the sequence came in again but took forever to transcribe, and I finally canceled the process as it appeared to get stuck and have not completely to writing on the disc.

  This morning the sequence are not yet in still.

  Very frustrating when I have a 4 hour movie I want to write to Bluray so I created now 4 separate sequences and try burning them to DVD in the chapters of 1 h.

  Hope someone can help me with this. See you soon. Janice

  Reinstall still will not affect your movies.

  But I would like to make send to still and do the transcoding in the first use of the Media Encoder.

  Use the Bluray H.264 preset for BluRay. For DVD use mpeg2 dvd preset and fields is higher.

  In particular, I would make for DVD transcoding with first as in CS5 will still reverse fields.

• First Pro CS5.5 installation problems

  I am a newbie to Apple systems and therefore has no chance first Pro CS5.5 installation to my new iMac desktop PC.

  I have correctly installed and used this program on my system Win7 very familiar, but move to OX10 and Apple has proved more

  that my non-technical brain can handle.  I can't find anything specifically labelled Install.app by clicking on some files with

  'Install' on the label, a box pops up saying "there is no set application to open the document.  So I would be able to work on my images,

  and I'd appreciate any help you amazing, knowledgeable, people can provide!  Thank you!

  Have you tried some documents for OSX beginners on the web?

  http://www.YouTube.com/watch?v=8gkvAt1FYps

  http://guides.MacRumors.com/Installing_Applications_in_Mac_OS_X

• First Pro CS5.5 crashes during video playback

  IT's REALL Y F * KING BORING. First Pro CS5.5 crashes when I press space (or by clicking on the Play button), it is impossible to change. Here are my PC specs.

  OS: Windows 7 Professional x 64

  CPU: AMD FX 6300

  RAM: 8 GB

  GPU: AMD Radeon 6570 2 GB

  QuickTime version 7.7.3

  All of my graphics drivers are up to date.

  Please help. I can't change it now.

  Oh and by the way, this is not happened with Premiere Pro CS6.

  What about the rest of the information requested in the Information http://forums.adobe.com/message/4200840 FAQ

• How can I go to first Pro CS5 After Effects CS6? (Problem)

  Hello

  I try to send my first Pro CS5 video in After Effects CS6, but when I right click on the clip, I can't even option allows you to send to After Effects. I can see the option send to After Effects, but I just can't select it. Any ideas?

  Thank you

  -Billy

  Versions must be the same to make it work.  You will have to perhaps put the original clip in AE and when you're done, export off AE file for use in PP.

• Importing fonts in first Pro CS5 titration?

  I have a particular font (Old English MT) I would like to use to create a title in first Pro CS5. I can't find a way to import the data in the program. Can anyone help please? A search found empty.

  Thank you

  Trevor

  You do not install the fonts in the first, you install in windows.

  Right-click on the police and 'install '.

• How to export a lower third animation in first Pro CS5?

  I bought a lower third animation that can opened using After Effects. What I want to do, is to create different lower-thirds with different names (transparent background) and make everyone as a quicktime file to be able to just put in my first pro film when I need to be shown. The question is: how export animated lower-thirds After Effects in first Pro CS5 with a transparent background, it will show just the slightest third animation. Any response would be appreciated.

  Thank you!

  You must make the file with an alpha channel. You want to set up rendering as Millions of colors + Alpha, Alpha right and then use a codec that supports alpha channels. Depending on your system, this can be ProRez 444 QuickTime Animation, or a png sequence.

  Press F1, go to the help files and read the section on render and output.