First ring on Lollipop is really low

I noticed (like many others even more on the Moto X XDA forums) that since the upgrade to Lollipop, whenever I get a call the first ring is very low. After the first ring, the volume goes to normal. Does anyone know if this is a bug or this bike implimented featured? If this is a feature I wish there was a way to turn it off.

Moved to the correct community.

Tags: Motorola Phones

Similar Questions

  • C114nr stream 13: stream 13 What kind of speaker/mic jack? 4 conductor plug, tip and first ring = audio off 2nd pic

    4-wire plug,
    Tip and first ring = audio off peak
    2nd ring = mass
    Sleeve = input microphone

    Use the Note book please?

    I got everthing work!  The interface had hung and all is well. It's easy to dig for amateur RADIO (as seen on Ebay)

    and works between computer and radio to send digital messages. Similar to "cat".

    The problem is resolved. Thank you very much!

  • I get really low rates by playing games.

    From: Talvos

     
    I just got a new PC and I installed the Orange Box having all the updates and patches and its operation to a really low rate does anyone know who this little problem

    PC: m8200n

    There 3Gigs of ram and a HP Pavilion Media Center AMD Athlon 64 X 2

    Processor Dual-Core 6000

    Graphics card: GeForce 6150 SE

    Windows Vista 32 bit

    From: Andy [YaYa]

    Hey Talvos,

    You have a good system, but your video card is not for games. Integrated video cards just not make games, but also a dedicated video card.

    Fortunately, I think I know what system you are using the same if you post your model number of HP (cough, cough), and you have a PCI-Express slot in your system, simply go to your local retailer favorite and look into buying a video card. If you talk to someone, tell them what game you want to run and what system you have and see if they have a recommendation.

    I would recommend an nVidia 8600 or 8800 (all that you can accept), do not go lower than the 8600. Amount of RAM on the card doesn't really matter, but you'll more than likely 512 or 320megs. Make sure the box says PCI-Express somewhere on it and not AGP.

    Slap this bad boy in your Inbox, or find a friend who knows what he does to help, download the latest drivers from nVidia.com and repeat the game.

    For the moment, but if you want to improve your framerate, to drop your resolution in the game down for like 800 x 600 and adjust advanced down a bit, or make sure they are all failing. Turn off stuff like

    Anti-Aliasing, it is nice, but it takes a lot of processing power.

    If you want to go with an ATi card, the HD 2600 is also a good choice. (Valve preferred and less problems of compatibility with most of the games)

    -A.

    Another response of the community of Windows Vista discussion groups

  • 1 should. what updates I really low charge based on my use? 2 is it too late to perform a WINDOWS ANYTIME UPGRADE?

    Basic information. on my computer. >

    Right to copy of WINDOWS 7 HOME PREMIUM 2009 SERVICE PACK 1

    System =

    Model = HP PRO DESK GI 400 MT

    Processor = Intel Core i5 - 4690 S CPU @ 3.20 GHz 3,20 GHz

    Installed memory (RAM): 8.00 GB

    System type = 64 - bit Operating System

    --------------------------------------------------------------------------

    Purpose of the computer is a home PC used for e-mails, Internet, surfing, composition in WORD, EXCEL, etc.. Not used for business at all. No SKYPE or any other communication, has just written Communications

    -----------------------------------------------------------------------------

    Currently, SELECT THE UPDATES YOU WANT TO INSTALL watch >

    Skype for Windows 7.3 desktop (KB2876229)
    Update for Windows 7 for x 64-based systems (KB3080079)
    Update for Windows 7 for x 64-based systems (KB3102429)
    Update for Windows 7 for x 64-based systems (KB3123862)
    Update for Windows 7 for x 64-based systems (KB3139923)
    Update for Windows 7 for x 64-based systems (KB3140245)
    Update for Windows 7 for x 64-based systems (KB3156417)

    ----------------------------------------------------------------------------- I know that some the updates affect Windows 10 loading, I want any. I'll stick with Windows 7.

    -----------------------------------------------------------------------------

    Issues related to the:

    1 should. what updates I really low charge based on my use now and in the future?

    2 is it too late to perform a WINDOWS ANYTIME UPGRADE?

    a. Research on the web, seems to come into conflict if it is still possible to do so.

    b. I see there are sites indicating WINDOWS ANYTIME UPGRADE FREE KEYS. Is it "FREE" and at what price?

    c. I see that Microsoft will stop supporting Windows 7 completely in a few years. What are the options to replace my current WINDOWS 7 HOME PREMIUM?

    Thank you for any assistance that you can share.

    RT

    Hi Roger,

    With the description, I understand that you have a few questions about Windows Anytime Upgrade and Windows updates on your Windows 7 machine. I will certainly help you to the query.

    I would like to inform you that mentioned updates are recommended and are important for maintaining the operating system up-to-date. You can see below the article for more details:

    Updates: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows/updates-FAQ#1TC=Windows-7

    In addition, if you do not want to install the Windows 10 operating system, then you can refer to the below section mentioned to cancel the upgrade.

    Upgrade Windows 10: practical information on planning and notifications

    https://support.Microsoft.com/en-us/KB/3095675

    However, you can run Windows Anytime Upgrade in the following operating system until the product operating system becomes obsolete you can buy the upgrade button. I would also like to inform you that the operating system Windows 10 is free upgrade until July 29, 2016. So you can also choose the latest version of Windows before windows gets obsolete for support.

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

    Concerning

    Ravi Kumar

  • QuickTime h.264 first CS6 comes out pixelated and low quality

    I'm working on iMac OS X 10.7.5, trying to export to quicktime square pixels video h.264 1080 p 24 fps first CS6, but the video comes out pixelated and of poor quality. Help, please!

    Thank you all so much for your help! I finally managed to get a good export with the following parameters:

    Format: QuickTime

    Screening: Custom, 1920 x 1080, 24 fps, progressive, quality 100, H.264, target 6 Mbit/s, 6 Mbit/s AAC Max, 48 kHz, stereo

    Go to maximum depth, 24-bit

    Advanced settings: key frame all 72 images

    Bitrate settings: Limit date rate to Kbps 6 000

    Use the maximum Render quality

    The only thing that so I was missing before with mediocrity, output was tick the box "key fits all 72 images."

  • New NB520 - low battery life

    Hi all

    Wonder if anyone would be able to help me with this. I recently bought a NB520. Its been less than a month but I already have problems with my battery. Batt life when it is not plugged in is really low (1 to 2 hours maximum), and I get a message inviting me to replace my battery. Find it really weird for a machine that is new. Any ideas guys?

    Cheers, new user NB.

    Hello

    I recommend to calibrate the battery first.

    The battery must be completely unloaded, then charge the battery until the battery led turn to green/blue. Then unplug the power plug and discharge the dough once more

    This procedure should be repeated several times.

    In addition, I recommend changing the settings for the central management unit for Win 7.

    Activate and set certain powers of paste options for individual devices of economy that helps extend the battery work!

  • The volume is too low on my Satellite L20

    First of all sorry for my bad English...

    I just bought a Satellite L20 and I am very disappointed by the volume of the speakers... I read several other post with people complaining of the same issue.
    It is almost impossible to watch a movie being able to catch all the words! The problem remains when you connect earphones.
    I already checked that al volumes are at the maximum level (Control Panel, hardware, player windows media, powerdvd etc.).
    I am very angry with this as I often watch movies and listen to music, but the volume is really low...
    Is there something to do?

    [Edited by: admin]

    Hi arch

    My colleague has Satellite Pro L20 (same as Satellite L20). I saw this camera and the sound quality is not the best. I agree with you that the sound is not loud, especially in writing, because the hands cover the speakers.

    If you check other notebook series speakers are, as a rule, placed close to the screen. In my opinion, it is much better solution. In any case the Satellite L20 is unit low budget and the focus was not multimedia surgraves just. So that the camera is very good and the price is right.

    Personally, I want to have the multimedia unit, but these units are much more expensive. Unfortunately, you have to live with it. In any case, I hope that you will reach all day on your device and there is no other serious problems.

    Good luck!

  • m6-1178ea audio HP envy beats sound fluctuations and low windows 8.1 (no compatible drivers)

    Hello

    I have a laptop hp envy beats audio m6-1178ea. everything worked great until I upgraded to (forcibly) to windows 8.1. Since then, the audio has reduced in quality, power. The control panel with EQ does nothing. Small changes with the sidebar on the left, but in general the sound is it good and really low. When I plugin speakers or earphones, it's even worse, the quality declines more, the sound comes only out really low and flat, no bass and also varies a lot. (for example when I plugin the speakers for 1 second the sound is good and strong, and then he goes down and fluctuate). I have lived many forums like this one, I used the latest drivers (which are more than a year), I used the default windows drivers that disables audio beats, still nothing.

    All solutions? Microsoft, HP will lead to a solution and the correct drivers?

    Hello @fivos_,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post about how there is an audio issue with your laptop after upgrade to Windows 8.1, and I'd be happy to help you!

    As you said, the drivers for your computer and available software indicate that there is no compatible driver for your system. You can choose to reload Windows 8 on your system and configure your Windows updates to allow only certain updates to the installation. This document should help to upgrade your system to Windows 8.

    I hope this helps!

    Concerning

  • Low volume on Satellite A100 - 01 L

    Hello, yesterday I bought a laptop Satellite A100 - 01 L and the sound from the speakers is really low, even if the volume is maximum (both: media player and the laptop actually).

    Could someone of you give a tip I can do? I already test the laptop with CD DVD and music, and in both cases is quiet. I think it might be something I have to do in the system (saving mode or something like that)

    Hello

    The front volume control is the first one should check what common user
    Put it to max level.
    Then, if the sound intensity is not enough that you could check the sound options in Control Panel.
    There you can assign all the controls at the top.

  • Low rate display on a good laptop!

    Hello

    Recently I bought a new laptop called the: HP 15-P032ND

    Specification of the laptop:

    Processor: AMD Quad Core A8-6410 2.0 GHz (up to 3.5)

    RAM: 12 GB / HARD drive: 1 TB + 8 GB ExpressCache

    Graphics card: AMD Radeon R7 M260(2GB)

    OS: Windows 8.1

    Mainly for school purposes and sometimes a little play.

    Then I started Minecraft and noticed that I had really low framerates! (All about 20-50 FPS)

    The first thing that comes to my mind is; "Why have I not display on a newly bought these low rates.

    with record decent laptop?' So I tried a few things like;

    -Minecraft setting for the smallest possible settings! (Still only around 40-50 FPS)

    -Allocate more memory for minecraft

    -Turn off VSync in the AMD Catalyst Control Center

    -Minecraft setting a high priority in the graphic menu AMD switchable

    -Javaw setting a high priority in the graphic menu AMD switchable

    -Addition of Minecraft in the games/3DSettings menu

    -Addition to the games/3DSettings menu Javaw

    -Try to change the graphics mode in the BIOS CH instead of DYNAMIC

    (This is not possible because I don't have the ability to change my graphics mode!)

    But none of these options worked, I always get the same FPS rate as I did before!

    If anyone can help me solve this problem, then it would be amazing!

    Hello

    The problem you are experiencing is an old question with Minecraft.  I'm not too surprised.  Google the question of Minecraft.  Must be able to go far beyond 100 + FPS if you change the setting of the game proper.

  • Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

    So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

    Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

    Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

    https://www.YouTube.com/watch?v=xc6Hwgedqmo

    This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

    My Acer Aspire V5 552 Specs are.
    Windows 7 X 64
    8 GB RAM
    AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
    AMD 8550G GPU
    I have all the latest drivers and updates installed.

    The charger is not damaged, it is original one supplied with the notebook.

    Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

    No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

  • 15 - f162dx: the sound is * ridiculously * low

    I recently bought a HP 15-f162dx laptop. Computer really nice and I went to really like it even if it's less than a day since I bought it. So, after getting a song stuck in my head earlier today, I opened my laptop to listen to it on Youtube. Only to find out that the sound is * rediculously * low. On 100 volumes in the headphones , I think the song is 10 volume on my TOSHIBA laptop that is * collapse *. Is this a known issue with my type of laptop, or do I have to get replaced speakers? Really too bad because I bought yesterday

    EDIT: I just realized that, if the sound is really low in my speakers and my helmet it must mean he is not a hardware problem and maybe it's just a problem with Windows 8.1. Everyone knows this?

    Thanks in advance!

    -green0ovrs

    @green0ovrs,

    Hello and thanks for the display on the hp support forums.  If the first thing, you can check with other media players and other types of media.

    I have problems with videos of youtube where they are very weak and others are more modulated.

    Let me know after testing other media players and other media sources.

    Thanks again for posting and have a nice day.

  • Lollipop 5.0.1 - phone dead error

    Hello people!

    Today I got a message to update on my compact Sony Xperia Z3. I started the update, and after you download it, my phone off to install it. However, the only thing I got is an Error Message ("ERROR - update failed') with a dead-Man Android. I can't do anything now, he just keeps trying to start but after Startscreen of Sony, there is this error Message with the dead man android.

    • I tried to update with my laptop, but it is not even connect to it because it is not possible to turn on
    • I have reset and turned it off manually the several times, no luck yet
    • Reset while it is pasted done laptop Companion recognize the phone, but still can not update cause it loses connection

    I had the same problem with the first version of Lollipop and after a few hours, it worked to cause whatever it is. Now, I have the same problem and I'm starting to get really tired. Can't do anything with it, now already off for 8 hours, nothing happens except for the phone tries to start and this error message.

    Please help if you have had the same problem, I don't see more possible solutions.

    You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

    Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

    Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

  • Display of Windows Vista, the icons and all THE GRAPHICS suddenly pixelated, appear low quality at the highest resolution and colors

    Please help, out of nowhere on my screen - background, all icons, all graphics (including the Explorer and other programs) have become rough and pixelated and seem very low qualty even if my display is set to the highest resolution management settings and color. I've not been able to find a way to restore and have no idea why it is doing this in the first place. It's really bothering me, it's hard to read (text appears fuzzy and broken up, not smooth and sharp, icons have white or another pixelation around them and do not have the 'look of glass'.) I was wondering if one of the old games my children changed my settings somewhere but I've lived every control panel I find and have not been able to correct the problem.  Even the buttons (back, forward, refresh, etc.) in Explorer have bad pixelation. That's happened? Help! :) Thank you

    I would also update the drivers, firmware or software for your monitor at the same time.  Also, if you have another monitor, swap them to see if the problem goes away or moves - then we can pretty much reduce the question to the screen and not the video card (and if the updated drivers do not resolve this problem, then it's a hardware problem and you can either take a workshop of computer service repair or simply a replacement of purchase screen.)

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The speaker of low volume, even if the levels are overexploited

    I just got my computer from a melody of Staples yesterday. Today, I noticed that my volume is really low. I tried maxing everything out. I checked the levels under the control panel. Nothing works. Beats Audio levels checked and they are all up.

    I unplugged my speakers to my PC and plugged on my daughter's laptop and the volume is fine, in my PC and the volume reduced to less than half.

    I'm in Windows 8. Have a HP Pavilion. 64-bit system p7 - 1436 s

    Can someone help me with this problem?

    Hello Highland_Lassie,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems with your audio files being low on your computer running Windows 8. I'm you provide a HP support document: use Microsoft System Restore (Windows 8), which you can use to restore your computer to a point in time where your audio worked correctly. It will be re-setup your settings as before when it worked.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a wonderful day!

Maybe you are looking for

  • RN102 ran out of space, restarted unit and is still rising. Help!

    My RN102 ran out of place today so I released about 400 GB. DF h confirmed that I released the space but I was always getting no space left on the device errors. Btrfs showed this: Btrfs fi df/dataSingle data: total = 3.62TiB, used = 3.62TiB Not know

  • Windows Update icon is stuck on shutdown (stop)

    I am running Windows 7 on a 64-bit computer. There is a Windows Update icon stuck on my stop button. How can I get rid of him?

  • Where is change in Camera Raw to TIF images saved and how can it be undone?

    Being new Camera Raw I find there are advantages to use RTAs to make certain types of changes even to non-premieres images like hair that I have a lot of.  One of ACR adjustments I find particularly useful vs using the PS is to adjust the dark and li

  • How fill you in email signatures in models to engage?

    I'm trying to understand how we can automatically fill the email signatures for our members of the sales team in our models to engage. What do I need to create a fusion of field of a type that they can use. Did anyone done this before?Thank you!

  • I need assistance with ellipse selection.

    Hi allcurrently I am in according to this: http://design.tutsplus.com/tutorials/create-apple-photoshop--psd-336 guide to create only apple.Right now I'm at step 8. The guide says that I need to create an ellipse and then another. I did it. But my ell