Fix a door-HP 2175xi cartridges

Similar Questions

• OfficeJet HP 5510 all-in-One - door locked - ink cartridge does not open.

  Windows XP Service Pak 3, HP 5510 Officejet, printer, USB connection.

  Won't let me open the ink cartridge door.  So, I can not install new ink cartridges.   It started about 3 weeks after I deleted some other software.   When I touch the door to open it, I get this flashing Error Message - "Door open, door close print cartridge."   (but door is not open, it is locked closed).   .   Printer will print documents correct, my problem is that I can't load new ink cartridges.  I could probably force and break on it to open it, but am afraid my printer does not work after that.  I love it and want to continue using it.

  Three times, on different occasions, I crossed the steps on your website to reset the printer.  They did not solve it.  I opened the back of the printer and looked for any paper jams and tips or debri.   I took can air and exploded all over where I could, but nothing came out.  I don't have a paper jam, when this started.

  Is there a code pin or something to get out, the door somewhere?

  If I force rotating door and breaks, the printer works?

  Problem started on December 14, 2010.

  Thank you

  Hello Oldlady10,

  The 5510 JO has a Center door that goes through the top on both sides. It is possible that the door warped a bit in the middle and create a barrier that will not the door opens without a lot of strength.

  Solution: Hold the door with both hands as you open the door, then take both thumbs and press down on the top of the door to repel the distorted area and then lift the pen access door.

• Printers HP 6520: 6520 cartridge door lock

  Print quality spoils before the ink level says cartridge is empty. Want to know how to unlock door cartridge manually so that I can change the low ink cartridges. Forums online with HP Tech answers don't address this issue.

  Nothing in the printer maual or online help answer this problem.

  Tell me how to unlock door manually before cartridge of ink cartridges - please!

  Simple fix to open the 6525 HP printer cartridge access door

  Press and then release the power button on the upper right of the printer 6525. Once the printer stops and all the lights are turned off, press and keep pressing the power button on the upper right corner of the printer. Continue to hold the power button in until the printer stops its internal implementation mechanism. Now, you can release the power button and open the compartment to the printer.

• my printer says that the door is open, but it is not how to fix this?

  HP Deskjet 6840 Windows Vista

  There is a document with the main steps and photos to help fix a door open question. The document can be found here.

  I hope this helps.

• HP 4620: HP 4620 - cannot open the cartridge door.

  I need to replace the cartridges but can't seem to them.  I get the message ' X the door or cover must be closed to print.  Make sure it is completely closed.'  When I try to open the cartridge door.

  I read some comments and messages, powered and on a number of times without change and even tried the zipper feared, while the printer is running technical several times, and I can not even open the cartridge door.  Tomorrow I'll call HP support line, everyone knows success with any other technique?

  I spoke with the support and the problem is now resolved.  Basically, when I opened my door of printer cartridge it gets about 1 inch upward and feels like it stops and to open it any yet to break something.  When I just go ahead and keep lifting the door, it opens without breaking the hinges or anything else and I'm able to replace the cartridges.  It just feels like it won't break anything to open it, but it's actually correct.   Do not forget that the reason why I have the 4620, it is that I broke my last officejet by forcing the door open when you try to replace the cartridge, so I bought the 4620 to replace.  I affected the hinge on my last Officejet.

  Detective Conan.

• print only after the opening of door cartridge

  Have HP Officejet Pro 8500 has. When the print command is sent to the printer, it (printer) shows that the printer prints but it doesn't unless I first open the door to the cartridges and close it. Then it prints whaat is in QC. Why would this happen?

  Hi gpwilliams,

  If you follow the steps described in the following link, is there a change?  Click here

• HP C7280: ink cartridge access door is open

  Hello

  My HP Potosmart C7280 AIO (all-in-one) is stuck with an error message.

  Door open

  Ink cartridge access door is open.

  I have reeived a printer replacement in support of July 2008 and HP will not help because my original printer was purchased in Dec 2007.

  Google did not help

  Search HP support site did not help

  User manual did not help.

  I also tried this:

  power off

  Unplug the power cable

  Wait a minute

  Press and hold the "#" and "6" keys

  Plug in power chords

  Be patient

  Wait for the white screen out.

  Release the keys #6

  Press the button power

  ... all of this in the hope that a false alert will disappear. There NO :-(

  Experts out there?

  Is - this firmware/hardware translation?

  In the future, I'm not spending a dime more with HP unless this issue is resolved in a satisfactory manner.

  Help to get forward.

  Pete

  Message edited by prnthlp on 05/21/2009 12:27

  I also sent the email below to HP support and hoping that someone will help.

  Sent by e-mail E-mail form
  Please contact the e-mail HP support

  Thank you for sending your e-mail to the customer of Hewlett-Packard. You will receive a system generated acknowledgement [[the lapse of time, may vary by region]]. If you do not, please resubmit take extra precautions to make sure that you enter a valid and functional e-mail address.

  If you have additional information or request for information, please contact HP

  
  When did you purchase your product? : 2008

  Product HP Photosmart C7280 all-in-One Printer

  Select a problem area: error messages

  What is your serial number (SN): MY82NH43NC

  What is your operating system? : Microsoft Windows Vista Home Premium 64

  How your product is connected to your PC? USB cable
  
  If there is an error message, please specify:

  Door opening / Inc. cartridge access door is open

  Description of the problem: the ink cartridge access door is not open, but this post just won't go away! The printer is in normal state (not open) and I am ready to print. How can I get rid off the coast of this message. Help, please.

  Please provide previous steps of troubleshooting, or information that can help HP help you. :

  I tried to plug the printer in holding together the "#" and "6". In the past it has helped to solve other problems of the firmware, but this time the message "access cartridge door is open" message remains on.

  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): Nop.

  How would you describe your level of technical skill? : Advanced

• Anyone know how to say a printer HP PhotoSmart C310 is OK to use a cartridge installation?

  I need to fix this error:

  "Print cartridges listed above are not intended to be used for this printer as it is currently configured"

  I bought my HP Photosmart Premium C310 directly from HP a little over a year.  I checked the box to have an extra black replacement cartridge included for about $40.  The cartridges that I installed initially are all now empty (it's true, he is not getting used a lot and the original game lasted more than a year).  I put the new cartridge and get the above error message.  After a phone call, it turns out there are two kinds of cartridges, 'installation' and 'normal', and configuration cartridges are accepted the first time the printer is used.  The shipped replacement cartridge I paid $40 for says "setup" on it and it's the cause of the message.

  HP support by phone will not help me as it has been more than a year.  I feel like I got ripped off for $40...  Is there a solution?

  (1) use the menu to restore default settings

  (2) remove all ink cartridges

  (3) remove the both cartridge door.

  (4) turn off the printer and get an error msg saying: you must put in the support and the cartridgers.

  (5) install the cartridges support and installation

  (6) the printer says "thank you for the installation of genuine HP ink cartridges.

  If your PC can't see the printer anymore,

  (7) print the configuration of the printer, get the IP address.

  8) go to the properties of the printer to your computer and to configure the Port to the same IP.

  (9) to display the print jobs and printer (open devices and printers, click the printer), and then click the printer and uncheck use offline.

  

• OfficeJet 8600 ink cartridge carriage will MOVE!

  Office jet pro 8600; right out of the box. Yes, it is on. When I opened the door, the ink cartridges carriage is supposed to follow it to the left to allow installation of cartridges. It does not move. How so he could move to the left to access the transport?

  Hello mg_cjb

  If you still haven't returned/exchanged the printer you can try the Solution 4 of the following article.

  Jam of transport

  You can share the printer if you still have problems.

• Message or incompatible cartridges on HP Photosmart C4480 all-in-One Printer

  I changed my color ink cartridge (a 75XL) on Monday, 16/04/12, and everything printed fine Monday.  I turned off my HP Pavilion laptop and printer on Monday night.  Tuesday, 04/17/12, I started working on my laptop and when I tried to print the small printer screen says "not compatible ink cartridges and my laptop screen said" the next cartridge has a problem: black ink cartridge '.»  I had kept the black in (a 74XL) cartridge because he still has a lot of black ink in it.  I removed the color and black cartridges, made sure that the point of contact with the printer is clean, so that both cartridges have ink in them and they are placed in the correct locations (black on the right) and the cartridge color left.  I don't know why I get these messages and why the printer does not print when he did print Monday after changing the color cartridge.  The two ink cartridges are XL, but they are not identical. The black ink cartridge is more horizontally (fate of the stick to the door of printer cartridge) further than the color ink cartridge.  The two are the same vertically / height.  Both cartridges are the type "XL".  I tried to download and use the diagnostic tool and it has led to tell on the screen of my laptop there is no problem with the printer.  Can an HP agent contact me and help solve this mystery.  It's very frustrating because I only use HP products (including two ink cartridges); and if I had to buy new cartridges, how do I know that this problem is happening?  Help please!  My email is [removed personal information] Thank you.

  Hello

  Please see the following link for t\s on this issue.

  http://support.HP.com/us-en/document/c01442936

  If the t\s has been completed restore printing to its default settings, remove the cartridges from the printer.

  Steps to follow:

  • Start button / stop + Combo Cancel button
  • Enter the combination of special keys 1 [Scan] 3 [color copy] 2 [Black copy]
  • "Support menu" will be displayed
  • Press 2 [Black copy] until the display shows "Reset Menu".
  • Press the 3 [color copy]
  • Press 2 [Black copy] until the display shows "semi-Full reset".
  • Press the 3 [color copy]
  • The printer shuts off and turn on by itself, else wait for 20 seconds and power on the printer

  Note:

  All user settings will be restored.

• HP Envy 4500: Says new ink cartridge is not compatible, it is the right type of printer

  I bought a new black ink cartridge and it was appropriate for the printer and worked for the first time. Now, whenever I need to print something the printer says "cartridge is not compatible.

  Need answers step by step to solve the problem. Thank you.

  Hey @angelee,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your desire 4500 e - all - in - one printer which rejects a cartridge. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. When done, make sure you use real not reloaded cartridges. If the cartridges are genuine and not filled, this document explains How to fix the errors of rejection cartridge with your printer.

  Please let me know the results after following the above. If you are able to clear the error, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Difficulty to remove the door of Pavilion g6-1d11dx laptop

  I saw the online service manual, and it says to remove the battery, loosen the two captive screws that fix the door to the computer. I did it. Then I'm supposed to be able to remove the service door. It's not going to.  Then I watched a video for a newer model, and he says to slide the battery release while removing the service door. I did it, push the release of the battery more than all the way, but the back door still won't come out.

  Here is the service manual for your laptop: http://h10032.www1.hp.com/ctg/Manual/c03094202.pdf

  Is there some kind of trick to go out this door?

  Moreover, the screws, but they don't come out. I guess that's why they are called "live captive."

  The reason why I need to open the door: to replace the memory. There may have been a problem of overheating that caused memory to go bad, I'm guessing, but not sure about that. Which would affect opening the back door? I guess overheating, because when I do the memory diagnostic when the computer first starts, it goes. But if I do 10 or 15 minutes later, she fails.

  Hello:

  It is simply difficult to lift the door.

  See this related post... and the other links I posted therein.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-Pavillion-G6-memory-upgrade-problems/m-p/1374715#M6863

• Which current printer uses cartridges 350Xl and 351XL please?

  Apology because I know this has been asked before but my photosmart c4380 is now partially dead (prints but the scans are still completely black? do not know if this can be easily fixed?) and I sitting cartridges in the closet.  Could someone tell me what current models use these cartridges please? Thank you.

  Hi there, these cartridges are generations old at this stage for his very little probable that you will be able to buy a new printer that takes these supplies. If the scanning feature no longer works on the unit, but you're an owner of /tablet smartphone (Apple or Android), a solution would be to install the HP all-in-One Printer application. This application automatically processes the images taken by the camera of your smartphone or tablet to create. PDF or. JPG files. You can share documents from your device whenever you usually store your scans of the C4380. I included a link here to a document of support for the application with links to the download page in Google game as Apple app store.

  Just be aware that the other features of the app wouldn't be used as the C4380 is not compatible with the application. But at least he could meet your scanning needs, and allow you to continue to use the printer for printing needs you have.

  Hope this information is helpful to you and if you have any other questions just post back.

  Best.

• HP PSC 1600: "Remove and check right cartridge" Error Message

  First had error message with a reremplie cartridge.  Could not see something wrong and could not erase message so bought a new cartridge.  It worked once or twice, now have the same message.  I have removed and replaced several times without success.   What I'm looking for? Have turned off printer for days, but when lit, same message comes.  I can't wait to go buy a cartridge if the same thing will happen.

  This document explains How to fix the errors of rejection cartridge with the printer. If after completing the document, you still have the same error, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above.

• How to count the edges within the great period of door?

  Hello

  I use a PXI-6624 counter/timer in Visual Studio C++ with Meassurment Studio.

  I want to count the edges on a signal within a high period of an input signal.
  I found the documentation entries "CTR n CBC", "CTR n GATE" and "CTR n to THE.

  My idea is simply configure the counter 0 to count the edges on CBC by blocking via DOOR.
  can be an example to my problem in the installation of nor, but above all I do not understand the description of landscaping.
  to find a good example, you must know the name of the function you want to use.
  can someone tell me the good examplename for my problem?
  What call configuration should I use?

  a little less important than my first problem is a similar.
  I want to count the edges on a signal between a start trigger and a relaxing stop.
  SRC-> signal
  DOOR-> start signal
  To THE-> the stop signal

  I found a way to count the edges of the internal clock between start and stop (2 Seperation of edge), but not for an external signal.

  can someone help me with this? especially with the first.

  B

  Hi John,.

  Thank you for your help. It works very well.

  I had a few problems with how the timebaseSource should be implemented.

  Finally, I found the solution.

  for those who do not want to search long for the code, it is here:

  Create the task
  
    CNiDAQmxTask ("CITask") m_task;
  Create the meter inlet channel
  
    m_task. CIChannels.CreatePulseWidthChannel ("PXI1Slot16/ctr0", "",)
  
           atof (minimum), atof (maximum), startingEdge,
  
           DAQmxCIPulseWidthUnitsTicks);
  Retrieve the channel to change
  CNiDAQmxCIChannel chan is m_task. CIChannels.GetAll ();
  Fix the DOOR Signal
  
    Chan. SetPulseWidthTerminal("/PXI1Slot16/PFI38");
  The value of the Signal SOURCE counton
  
    Chan. CounterTimebaseSource = ' / PXI1Slot16/PFI39 ";
  CNiDAQmxCounterReader myCounterReader (m_task. Stream);
  
    Double measuredWidth = myCounterReader.ReadSingleSampleDouble ();
  

  Thank you and goodbye

  B