FixIt question

I downloaded Fixit program on my pc. Now I can't acsess the Fixit site where my pc data are in store. I get this message (The Windows Live Network is not available on this site for the following reasons) my OS is vista premium 64-bit and I was loged in Windows live at the time. Help, please. Thank you

Hello daddy bear.

I also suggest that you post your question on the Forums of Windows Live for a better answer to this question. This is a dedicated forum for any questions related to the Windows Live ID issues.

http://www.windowslivehelp.com/product.aspx?ProductID=10

Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • KB2572073, KB2518864, KB2633880, like all the others below, updates of each start, long loading times, success of Microsoft log shows 5 full loads,

    Simply, downloads, 5 times in my case exceeded the meter MS Updates to and somewhere other than my system. Whenever I start the same updates are available. FixIt questions do not address it directly at all, KB2572073, KB2518864, KB2633880 are updates of the problem SP2 and SP3 FIXIT has no ability to cover this because there is not a specific query on exactly that.

    Choose one or two-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=KB2572073+KB2633880+KB2518864&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_xp-windows_update&askingquestion=false

    Tip: See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

  • M4 Aqua does not start

    I got the phone just 10 days ago and I am already faced a major problem with it. After 10 minutes of video long shot, I got a message from the internal memory is full, and the camera stopped working. Everything was good except for the phone works a bit slower, so I decided to restart it. And who killed. The phone starts, it displays the Sony logo, and then Android, then a blue loading screen and that's it - it hungs every time I do it. I don't always have very important data stored in the internal memory has so decided to do a hard reset. To my surprise the phone will not boot recovery mode. This is the first phone I've ever seen who is unable to load the recovery mode. In any case, suppose that I do not press the right key combination then please let me know if you are a course at 100% the keys that must be pressed. Thank you!

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

    If this does not work then I'm sorry to hear that, but you must return your unit to place of purchase or ask the Xperia and have your aircraft inspected http://www.sonymobile.com/global-en/support/contact-us/

  • Problem with microphone when using the speakerphone in 5.1.1

    During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
    To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
    What is c?
    Please someone try and post it here...
    We need an update I think to fix this bug with mute mic!
    Please answer me.
    Thank you.

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Failure of the software update, try to disable to load but it lights again and again

    Hello, I installed Lollipop but PC Companion insist an update exists I was completed by a faulty update of software startup message, my mistake was trying to update with the battery with 65% of the load. And don't remember not what happens, but I'm done with the software update failed error and the phone switch works and market with the same message, I read the other post about turn off and load, but I turn off with the little red button to force it, but if I connect the magnetic cable or usb cable to power it on again , I force to turn off and and the phone turns on again (with the message update failed). It is this normal? I left more time on the phone like that but "load", this will dry the battery? What do I do? Thank you

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Printer Officejet 6600

    I have a HP Officejet 6600.ScreenShot217.jpg

    When I go to scan or print I get a notice

    It is not any other things to do.

    This happens if I try to print, copy, scan, etc..
    Help please.

    Hello @alexm,

    I would like to help you today with "server busy" error that you get when you try to print or scan to your HP Officejet 6600 e-all-in-one printer. However, in order for me to provide specific troubleshooting steps I have a few questions for you.

    1. what operating system are you using on your computer?

    What is my OS?

    2. is your printer connected via USB cable or network?

    In the meantime, if you are using a computer Windows can I run printing HP and doctor Scan? This tool will run on your computer and "fix print" or "scan fix" questions for you. The Print and the doctor analysis tool will scan your computer for different connection, driver or software conflicts and try to resolve these conflicts for you.

    HP Print and Scan Doctor

    Please let me know if this tool solves your problem. Also be sure to reply to this post with your operating system and the type of connection, so I can provide additional troubleshooting steps. Good luck!

  • Lollypop eating battery

    Before the update for lollipop my z3 of Sony use about 30% of the battery by day! Now with the lollipop 21% for an hour. Help me! I don't need such a new thing, I need time battary! All the stamina settings are turned on.

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Phone keeps restarting after the last update

    After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
    HELP ME GUYS!

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • My phone doesn't request pin

    Hello world!

    Since the 5.5.1 update I did yesterday, my Xperia Z2 does not have the PIN number more, so I can not send messages, make calls etc... I removed the SIM card then succeeded him, but it does not work.

    In addition, when I go to the settings / security, I can access my SIM settings, but it is "gray", I can't click on it.

    I don't know what to do, do you have a solution?

    Thank you!

    It's not 5.5.1 5.1.1

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • z3 is restarted and sd problem

    Hi all

    I just told you about problems with my Sony Xperia Z3 Compact phone and my micro SD card:

    The purchase of my phone, so I presented my card micro sd responsible on 6000 and 800 photos mp3.

    The card is recognized without problems, scanned normally. The problem appeared on the next reboot of my phone. I go then go realize that this train a lot and especially it heats excessively to a boil in a few minutes. Through the application of GSAM Battery Monitor, I see that the "Multimédia" application takes too many resources. This application system includes four processes:

    -Download Manager

    -Multimedia storage

    -Memory

    -Downloads

    I run my application 'Album': no picture, we see that the application looks for the files.

    I run my application "Walkman": no mp3 does not appear, we see that the application looks for the files. Once the phone

    restarts!

    What can I do?

    Remove your SD card and test it on a Pc and phone performs a system repair

    Realization of a system repair using PC Companion , this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Clock app crashes everytime I try to open it

    The first time this morning. I restarted the phone 5 times now, clean cache, clear, and then select the application has tried, but it is not possible. How can I solve?

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • 23.4.A.1.200

    Last update dual Z3:

    1. contact list does not work

    2. messages dosen't work

    3 synchronization with google contact list fail

    4 cannot call, cannot receive calls - I can't hear, other setbacks too

    I can't do anything except call - basis thing does not work.

    What should do?

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Phone locked to the lockscreen with "initialbootsetup has stopped."

    Today, as I turned on my phone, I'm stuck at the screen lock with this message.

    I press 'ok' and the message comes back again. The strange thing is that the message is in Spanish (I have my phone in English and that the lockscreen picture disappeared and the theme of the xperia is there now.

    It seems that the phone works well in the background, but I can't access the home screen.

    I can take screenshots, change the volume, etc. and I could have internal access from the phone and SD card, I did all the backups as possible.

    Is it possible to fix this? I use Lollipop 5.1 (23.4.A.0.546)

    Thank you very much.

    Matías

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • Windows Update stuck at "checking for updates... "(Windows 7)

    No matter what I do, I can't get this thing to work.

    Let me start by saying, what operating system (Windows 7 Professional 6.1.7601 "Service Pack 1, Build 7601") is something that I had through my college (Dreamspark). This copy is enabled and works well so far.

    However, I tried to reinstall my Adobe applications, and he says that I can not install it because of a Windows update that I did not.

    Of course, I go to Windows Update and let it run.

    I let it run for hours, almost all night and day. It's just constantly "checking for updates... "scene and will never progress.

    I checked the newspaper and I get recurring errors with the prefix '0 x 8024... '. ».

    I did research on the error codes that are matched with the prefix said, and Microsoft took me to the "Diagnostic tool for Windows Update". I have let it run, then select it to troubleshoot Windows Update issues.

    It 'fixed' "questions," except one: "recent updates installation problems: don't not fixed."

    Large.

    I tried to run Windows Update again for a few hours, but nothing helped. He is always looking for updates even while I'm typing this.

    Can someone else offer suggestions? It's infuriating.

    Nope.

    1. to "Set Up Windows" select "Ask Me later".

    http://www.kodyaz.com/images/articles/Windows7-installation-RC/35.PNG

    2. install KB3020369.

    3. install KB3172605.

    Best regards, VZ

  • Symantec Endpoint Protection on Horizon view 6.0 Clone related with Persona management, message 'do not save profile '.

    Some users receive the error their character has no backup. KB 2019247 doesn't seem to be the problem. In the journal of VMWVvp.txt, there are repeated lines of this:

    [593708] [17/12/2015 09:12:35:0793] [RTOLogon! PreDC] recovered standardszed file name Info: process: ccSvcHst.exe, leader: \Device\HarddiskVolume2


    It is perhaps part of the problem? Flags of Persona logging and Debug are on. Within 3 hours, a VMWVvp.txt sessions had up to 300 MB. With the GPO management Persona, we have already excluded the ccSvcHst.exe process and we used the vietool to mark all existing files on the image of the mother as own.

    Any ideas what the problem might be? What should look us in the newspaper?

    However, profiles seems to be intact from one day to the other.

    The error code you see (0xD0000022) means: {Access Denied} a process has requested access to an object, but did not have the access rights.

    It may be a different problem with threads, as you pointed out.

    Is it possible to test yourself using 6.2.1 agent to see the problem persists?

    We have fixed questions on creating/deleting massive operation by browser and e-mail on this version client.

    Thank you.

Maybe you are looking for