FN key/flashcards/toucpad works not-Win7/Vista

Similar Questions

• Function keys no longer work Satellite L30 - Vista

  Substitutes for the function keys functions (flight / wireless/numlock/etc.) do not work - I deleted the drivers somehow.
  Can someone tell me how to run again?

  Sorry buddy but that no one can help you. Some info to offer or accept that nobody will offer no solution to this.

• Inspiron 15 3552 (N3050) screen brightness keys don't work not (Win10)

  Hello

  I have a Dell Inspiron 15 3552. The laptop comes with Linux, but I recently used a windows license, I have to install Windows Pro x 64 10. Everything works well except one thing:

  The brightness keys don't seem to work. I checked the power settings where there is a slider for brightness and the bar changes the brightness when I drag them with the mouse. In the Windows Mobility Center, there is also a similar bar that can change the brightness with the mouse successfully. I tried to boot in the BIOS (F2) and brightness keys it seems to work, so the problem seems to be only under Windows.

  Windows found all 10 drivers for the laptop, but I installed the display driver that I found using the Service tag. I didn't install anything else. I also tried to uninstall intel drivers and use the default Microsoft ones, but the buttons were 'dead' again.

  To install windows, I changed the Boot Option (UEFI) legacy and turned off the quick start... All other Fn keys (such as the audio for example) seem to work.

  I would like to get the keys to work because he was such an important feature for a laptop.

  Thanks in advance.

  PS. I also found this driver in page of intel which ends with the same version of 4 digits that downloaded from dell, but all the other numbers are different. Don't know if it's the same thing or do not give it a try.

  It was the quickset application. Once installed, everything works as it should.

• Please HELP Fn key doesn't work not wireless working not and network card drivers is not install

  Hello

  Yesterday I bought the computer hp laptop 15-d103tx, but after installing windows 7 64 bit. button fn laptop computer keyboard does not work, Wireless does not work and the network adapter are not installing... is there a hardware problem or is it because of unavailibility of pilots. If it's the driver please suggest drivers

  will be all of your quick response

  Thank you

  Hello:

  Here is the link of the wireless driver you need:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• product key no longer works for windows vista service Pack 2

  can I get the product key without buying?

  Probably not, but here are some possible links that may help (probably not):

  How to identify, locate, and replace a product key - http://support.microsoft.com/kb/811224 replace lost Office product keys 2003, 2002, 2000 http://office.microsoft.com/en-us/help/replace-lost-office-product-keys-HA001150834.aspx
  How to replace Microsoft software or hardware, order service packs and replace product http://support.microsoft.com/kb/326246/ manuals
  Replacement CD - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/replacement-cd/fb8230d4-000f-4ee7-b732-c9f8fff28bfd

• Has made a new installation, now Dell 962 printer will work not (Win7)

  So all of the facts are:

  I got a virus on my computer of who knows where. Whatever she is, she decided to remove part of my hard drive. So I had a few antivirus and anti-malware programs, and they did too good a job - I damaged my registry.

  If I had no other choice, but do a re-install. I didn't do a new installation; This is the option where all he moved to Windows.old. If the computer is good again, except that my printer is not working correctly.

  First, I tried the drivers from the Web site. I tried R151565, which should have done the job. This configuration is behaving oddly, however. It is scheduled to end after he installed the All in One Center, and it is supposed to leave me with a printer that works. This isn't.

  Then, since it was a re - install, I had to install updates. An update of the driver from dell was one of them. So I thought that this would solve things. The update was successful, but my printer is not installed.

  It never happened to me. The printer is not compatible, or it works. This feels like the printer is in limbo. So, I tried to think about what might be wrong. I looked in devices and printers, and there that caveat to sign on my printer. Then I looked in the devices, and I noticed this strange thing

  

  Why do I have two entries for a printer? This must be an allusion to the problem, but I do not know the answer. I imagine that there must be at least one person who has encountered this kind of problems. Please, help me. Research has brought me here many times, but I could not find a solution that matches my problem

  Hi KenLJ,

  Thanks for writing on the Dell Community Forum.

  We recommend doing a clean install of the operating system. Asking you to back up data from the Windows.old folder. Please use this link http://dell.to/1sU6QJ3 to restore your Windows 7 computer to factory settings. If this option does not work, then you can manually reinstall Windows 7 using this link http://dell.to/1mN6P6v. If you want the printer don't work, please uninstall the printer driver. Unplug the printer from the computer. Download the printer driver from this link http://dell.to/1IXOCus and install it. Connect the cable from the printer to the system only when the system prompts you to connect the cable. Continue with the installation, and it would print the test page once it is installed. There are two entries in the Device Manager, one for the scanner and the other is for the printer.

  Answer please if you have any other questions.

• Updated flashplayer, now it will work not (Win7 64 bit, IE9)

  I have updated Flash Player last night, and now it does not work, period.  I tried to uninstall, reinstall ad nauseam but in vain.  Troubleshooting information, it seems that it does not appear in the list of IE Add-ons, but I don't know how to fix this so that it doesn't - installation insists that she is successful every time.

  Anyone know what is happening?

  Looks like you're missing some files.  Try to do a clean install to see if that helps.

  How to do a clean install of the Flash Player?

• Equium A100 - 338 PSAAQE: shortcut keys not working not not after changing Vista to XP

  I recently bought a PSAAQE Equium A100-338. It came preloaded with Vista home premium. I removed what I need XP pro. I found all the drivers to get everything works except the shortcut keys. I tried all the drivers available, but none works. Are there other drivers available for the access keys work.

  Can anyone provide a url to a site where I can get the driver. Also, why are there no XP driver specific available, it took forever to find all those that I needed. I know a lot of it, specialists and companies that will not use Vista and only allow for XP.

  For these features, you have no drivers but Toshiba has designed tools or utilities, but I fear that these tools are not designed for Windows XP Home edition. Not yet.

  I believe you when you say that to many it professionals want to use Windows XP Home edition, but if everything works well, but these buttons are not so important to the features of the laptop and any computer can do its job.

• Qosmio F30: Multimedia keys does not work after upgrade Vista

  I upgraded my laptop Toshiba Qosmio F30 Edition Vista Home premium that I have received from microsoft.
  After the upgrade, the multimedia keys works not (first row) and also some of the shortcuts that is done by combining the Ctrl + keys to function (such as control + F1 to turn off the screen).

  After upgrading to Vista, I've updated all my device drivers with the second software DVD received with the upgrade to Vista.
  Also once again I've updated these drivers with final Toshiba drivers for Vista dated 04/25/07 on the internet. How to restore the functions of these multimedia keys and other keyboard shortcuts that does not work.

  I ask you: where you have downloaded the drivers and software tools?
  As I upgraded my machine, I had the same problem, so a user has me look on the Toshiba site and there I found some useful drivers.

  Maybe it helps, but I can't promise you.

  http://209.167.114.38/support/download/ln_byModel.asp

  Welcome them

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Keyboard not typing special symbols above the number keys online, but works fine otherwise

  Original title: keyboard problem

  Keyboard not hitting that special symbols above the number keys online, but works fine otherwise. When the shift button is held and you press a number key he type the last letter, which was typed any symbol, you try to type. Keyboard worked fine before, tried another keyboard and got the same results.

  Hi Patrick,

  1. what type of keyboard you use? Is it wireless or wired?

  2. did you of recent changes on the system?

  3. what web browser do you use?

  Method 1:

  If you use Internet Explorer, you can use another web browser and check if the problem occurs.

  Method 2:
  Step 1:

  You can start the computer in safe mode with network and check if the problem persists.
  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• An old game that I play in Win XP (Spear Of Destiny) will not work in Win7

  I like to play old games that work in Windows XP, but do not work in Win Vista or Win7. I get the messge of error "this system does not support mode full screen. The games are all games Wolfenstein and Spear Of Destiny. Any help appreciated. That's all that keeps me from switch to Win7. I have two computers running Win7 and will not work in both, so it is not unique to a single computer.

  This system of all games Wolfenstein and Spear Of Destiny may be played on win7? If this isn't excellence of sysem, then launch the game mode of compatibility , and you're done.

• None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have. How can I fix this?

  None of my function keys (F1 - F12) works with the exception of the ESC key. They worked fine yesterday, but now they do not have.

  How can I fix this?

  I use the SHIFT + F7 work much and would really appreciate help in getting up and running.

  Thank you

  Check if you have an F LOCK key in the top right of your keyboard.

  If this is not the case, try a system restore:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.