FPGA DMA not found in bitfile

Similar Questions

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Error: Copy of master for the Type definition is not found

  See screenshot below please. The typedef is there (I accessed it via windows Explorer and it is not grayed out in the code), and my FPGA VI is not broken, which uses the same exact control. I also have these constants by right clicking and choose create constant, so it's not as if I'm loading the wrong enum. Anyone seen this before?

  

  Because I'm a bad scientist, I don't know exactly what fixed my problem because I changed multiple variables at the same time.

  Here's what I did:

  Deleted the auto of the project folder (doubt this was important, still broken after that)

  Changed my open FPGA VI reference by a bitfile to the use of a VI, selected my FPGA VI, no. MORE CASE RUN ARROW! YAY.

  This finding was brought to go watch my FPGA bitfiles on drive - I've had two of them (weird). Usually a compilation replaces just the old file.

  Just in case where the names give a preview, they are:

  More: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx

  Latest: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx

  I went back to my reference FPGA VI open and selected the most recent bitfile I have compile this morning - no more broken arrow run.

  I have a feeling that this may be due to choose an old bitfile, but usually if the bitfile does not include the control, it will not be displayed in the node control read/write. If someone of OR wish to comment on this I would appreciate the insight on what can happen.

  I wonder if it's because I installed 2010 SP 1? Who knows, but it's fixed now.

• error-61499 to Compileinstructions.txt. File was not found.

  Description of the problem:

  I have a cRIO application that used a module NI 9401 DI, that I needed to change to use a cRIO or NOR-9411.  I added the module to 9104 chassis, modified the project to include the correct, deleted and added HW FPGA DIO VI in the application and went to compile...

  When I did, I got:

  error-61499 to Compileinstructions.txt. File was not found. Check

  Support SW installation target.

  Is that what sounds like my install Labview is watered upwards and my Xilinx compiler is missing or broken?  Let me know.  I am against a date limit to change this code.  I tried to re - install modules FPGA and re - compile, but when I try to open the FPGA VI to recompile LV hangs too.

  Things are degenerating fast here... I was really not looking forward to blowinga DAY reloading system ALL THE LV... since I KNOW what technical support is to tell me... I've seen that movie too many times.

  Any ideas are appreciated.

  JPR

  It clearly looks like a Setup error.  Make sure that you fix LabVIEW, LabVIEW FPGA, OR RIO, and other features that seem to be related.

• CompactRIO Deploy Error "LabVIEW: resource not found.»

  Hello

  I use a 9002 CompactRIO and LabVIEW 8.5.  I made a simple FPGA VI to read a bunch of analog inputs and write a square wave to a few analog outputs.  Then, I made an another VI to run on the target in real time in order to convert the frequency scaling and updated entries nationwide cycle duty cycle values and frequency real accountability.  When I try to deploy the VI in real time, I get the following:

  Deployment r03fsae (the goal settings successfully deployed)
  Deployment of special audit Tags.vi (5.89 K)
  Deployment GetRTHostConnectedProp.vi (3,41 K)
  Deployment of search and replace Pattern.vi (8,11 K)
  Deployment nirviFillInErrorInfo.vi (8.09 K)
  Deployment niLvFpgaErrorClusterFromErrorCode.vi (11.27 K)
  Deployment nirviErrorClusterFromErrorCode.vi (5.93 K)
  Deployment error Code Database.vi (3.67 K)
  Deployment to find Tag.vi (10.43 K)
  Deployment of fusion Errors.vi (6.75 K)
  Deployment Whitespace.vi topping (3.71 K)
  Deployment nirio_MultilineStringToArray.vi (8,81 K)
  Deployment nirio_AppVersionToI32.vi (3.96 K)
  Error error Code.vi (23.42 K) Cluster deployment
  Deployment _nirio_device_attrSetString.vi (9.46 K)
  Deployment _nirio_device_close.vi (9.90 K)
  Deployment nirio_Read32.vi (13,07 K)
  Deployment _nirio_device_open.vi (11.59 K)
  Deployment nirio_Write32.vi (13,01 K)
  Deployment _nirio_device_writeBlock8.vi (9.83 K)
  Deployment nirio_Write8.vi (13,01 K)
  Deployment _nirio_device_configSet.vi (11.42 K)
  Deployment nirio_DMAReconfigureDriver.vi (16.63 K)
  Deployment _nirio_device_writeBlock32.vi (9.36 K)
  Deployment nirio_Read8.vi (13.04 K)
  Deployment nirio_DMAStopAll.vi (11,39 K)
  Deployment _nirio_device_attrGetString.vi (13.06 K)
  NirviReportUnexpectedCaseInternalError (String) (5.58 K) .vi deployment
  Deployment of .vi nirviReportUnexpectedCaseInternalError (U32) (4.72 (K)
  Deployment _nirio_device_readBlock32.vi (14.41 K)
  Deployment _nirio_device_attrGet32.vi (13.85 K)
  Deployment nirio_IsItOKToDownload.vi (7.07 K)
  Deployment nirio_MiteNTDeviceFamily.vi (5.30 K)
  Deployment of Format Message String.vi (7.35 K)
  Deployment CORE.vi General Error Handler (51,02 K)
  General Error Handler.vi (13.19 K) deployment
  Simple deployment Error Handler.vi (10.01 K)
  Deployment nirio_CheckDriverVersion.vi (10,58 K)
  Deployment _nirio_device_attrSet32.vi (13,62 K)
  Deployment nirio_Download.vi (29,31 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (7.11 K)
  Deployment nirio_CleanUpAfterDownload.vi (6.22 K)
  Deployment nirio_PrepareForDownload.vi (6.44 K)
  Deployment nirio_EnableInterrupts.vi (13.76 K)
  Deployment nirviRIOSetUpMiniMite.vi (31.23 K)
  Deployment nirio_Open.vi (14.93 K)
  Deployment nirio_Close.vi (10.95 K)
  Deployment nirio_DisableInterrupts.vi (11,10 K)
  Deployment of nirviIntfOpen_cRIO - 9102.vi (85,54 K)
  Deployment of nirviIntfClose_cRIO - 9102.vi (12.24 K)
  Deployment of scale freq and duty.vi (4.46 K)
  Deployment XDNodeRunTimeDep.lvlib
  Deployment XDNodeRunTimeDep.lvlib:loadlvalarms.vi (5.47 K)
  Math.vi sensor deployment
  Could not download the math.vi sensor
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.

  Download completed with errors.

  This error message is not particularly useful, someone knows what could be my problem?  Or how I can fix it yet?  Is there a detailed journal where I can look for more information about the error?

  Thanks in advance for any help!

  Hi David,

  You may be walking on ground dangerous with your fpga code, old and new.  You use the modules in what is known as 'calibrated' calibration mode that is of fixed point math.  Your generation of square wave fpga using whole math, which is normally used when the modules operate in mode calibration "gross". To change the calibration mode, you will need to right click on the module, then select it desired mode to use.  I'm not saying that you do.

  What you need TO do to ensure the proper functioning of your fpga VI is to make sure that you use U32 son of math required and then convert the U32 an FXP using the correct encoding (if it is signed, word length and integer).  In your case the 9263 requires signed word in length, 20-bit, 5-bit all over.  Insert an FXP conversion between the generation of square wave and either create a constant FXP of the appropriate type (or use a control correctly put in place of one of the other 9263 channels [AO0 AO1]) and connect to the node of type of fixed point on the conversion OR define the conversion of fixed point with a right click on the exit node and the appropriate settings in the popup box.

  As for your new code fpga, I don't know why you used a sequence structure that your reading of 18 channels on the 9205 will have 144 microseconds, and each write two channels on the 9263 will take 5 microseconds.  I've not worked on how long will take the square wave generation.

  I do not understand your last question.

  > "I've attached a screenshot of my pwm_out.vi if I remove control of read/write of background, or if I don't use of all none of the analog inputs, it works fine.

  > But as soon as I add the analog inputs it fails... ».

  Did you create a new stream of your fpga_new.vi and referenced in your pwm_out_new.vi on the RT?

  It is difficult to guess what you are showing in the screenshots.  If the project is not too big then maybe you could post here.

  As mentioned above, by JMoto, software versions help.  Check in MAX you have on your PC and also on the cRIO 9002 to make sure that there is no incompatibility.

  See you soon

  Stephen

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• Someone smarter than me--help me please understand this - songs is not found

  This issue has persisted for a long time, but I am currently on iTunes 12.5 on Yosemite.

  At a certain point in time, and I can not associate with a specific event like an upgrade, a lot of my songs 13 900 became 'broken' - impossible to locate.  Not all, just a part... maybe 1/3 to 1/2.

  I of the wrong and has given several times, not wanting to do a radical reconstruction, I just jumped the songs that have been broken.

  I let iTunes manage my library - always have.  All files, including the "broken ones" are sitting to the right users/username/music/iTunes/iTunes Media/Music/Artist...right were all I expect.

  I recently found an album which had two songs next to the other, each 'broken', the other plays very well.  If I go to the finder, they are right where they should be.

  If I look at the .xml, the key to the place said same location, any other name for the song... and this combo of place/song name matches the location in finder.

  Here are two songs from the Album even next to each other:

  

  Track 651 Sugar Magnolia is very well and plays, track 652 ngone Saturday night is "broken" and cannot be found.

  Here is the XML on the two files, you can see locations are correct:

  < key > 6023 < / key >

  < dict >

  Track ID < key > < / key > < integer > 6023 < / integer >

  < key > size < / key > < integer > 14551501 < / integer >

  < key > total duration < / key > < integer > 505391 < / integer >

  < key > track number < / key > < integer > 20 < / integer >

  < key > year < / key > < integer > 1979 < / integer >

  < key > update < / key > < date > 2008-12-23T 19: 46:10Z < / date >

  < key > Date added < / key > < date > 2010-04-17T 01: 23:05Z < / date >

  < key > bitrate < / key > < integer > 230 < / integer >

  < key > sampling rate < / key > < integer > 44100 < / integer >

  < key > counter < / key > < integer > 1 < / integer >

  < key > play Date < / key > < integer > 3380317111 < / integer >

  < key > play Date UTC < / key > < date > 2011-02-12T 05: 58:31Z < / date >

  < key > Skip Count < / key > < integer > 1 < / integer >

  < key > Skip Date < / key > < date > 2016-09-21T 15: 52:06Z < / date >

  < key > notation < / key > < integer > 100 < / integer >

  < key > calculated rating < / key > < true / >

  < key > Album rating < / key > < integer > 100 < / integer >

  < key > Persistent ID < / key > < String > 859F0AE52E3FACA9 < / string >

  < key > track Type < / key > < String > file < / string >

  < key > statement of case file < / key > < integer > 5 < / integer >

  < key > folder County Library < / key > < integer > 1 < / integer >

  < key > name < / key > < String > d3t03 - Sugar Magnolia < / string >

  < key > artist < / key > < Grateful Dead String > < / string >

  < key > Album < / key > < String > 1979.12.01 Pittsburgh, PA (SMD) < / string >

  < key > type < / key > < channel audio file > MPEG < / string >

  < key > location < / key > < String > file:///Users/myname/Music/iTunes/iTunes%20Media/Mus ic/Grateful%20Dead/1979.12.01%20Pittsburgh,%20PA%20 (SBD) /20%20d3t03%20-%20Sugar% 20Magnolia.mp3 < / string >

  < / dict >

  < key > 6025 < / key >

  < dict >

  Track ID < key > < / key > < integer > 6025 < / integer >

  < key > size < / key > < integer > 8459472 < / integer >

  < key > total duration < / key > < integer > 291474 < / integer >

  < key > track number < / key > < integer > 21 < / integer >

  < key > year < / key > < integer > 1979 < / integer >

  < key > update < / key > < date > 2008-12-23T 19: 46:10Z < / date >

  < key > Date added < / key > < date > 2010-04-17T 01: 23:05Z < / date >

  < key > bitrate < / key > < integer > 232 < / integer >

  < key > sampling rate < / key > < integer > 44100 < / integer >

  < key > counter < / key > < integer > 2 < / integer >

  < key > play Date < / key > < integer > 3472053636 < / integer >

  < key > play Date UTC < / key > < date > 2014-01-09T 00: 20:36Z < / date >

  < key > notation < / key > < integer > 100 < / integer >

  < key > calculated rating < / key > < true / >

  < key > Album rating < / key > < integer > 100 < / integer >

  < key > Persistent ID < / key > < String > 0AD50DB205887189 < / string >

  < key > track Type < / key > < String > file < / string >

  < key > statement of case file < / key > < integer > 5 < / integer >

  < key > folder County Library < / key > < integer > 1 < / integer >

  < key > name < / key > < String > d3t04 - e: One More Saturday Night < / string >

  < key > artist < / key > < Grateful Dead String > < / string >

  < key > Album < / key > < String > 1979.12.01 Pittsburgh, PA (SMD) < / string >

  < key > type < / key > < channel audio file > MPEG < / string >

  < key > location < / key > < String > file:///Users/myname/Music/iTunes/iTunes%20Media/Mus ic/Grateful%20Dead/1979.12.01%20Pittsburgh,%20PA%20 (SBD) /21%20d3t04%20-%20E_%20O ne%20More%20Saturday%20Nigh.mp3 < / string >

  < / dict >

  < key > 6027 < / key >

  Here's the location of the physical file Finder of the two files:

  

  I DON'T SEE A DIFFERENCE:

  When I right click - read information in iTunes, the news of 'rent' are different - the 'broken' file includes the "file:///" and are not the songs that play very well (starts by / users /).   Meta-data are the same.

  

  The file above plays very well, it does not work (and it is compatible with all the thousands of files broken):

  

  So I am confused - any help would be greatly appreciated.  I thought I was going to need to do a simple "find and replace" to "file://", but after reviewing the file data and the xml meta-balises, I am puzzled.

  Oh Yes - here is the metadata for the song "broken" above which has the "file://" to the location:

  

  .. .it shows the location as the other playable songs... just/users /...

  puzzled

  Assuming that everything I laid out above are correct:

  How do you fix a large group of songs including "not found" If iTunes:

  (1.) the path and the name presented in the library xml is correct and

  (2.) the file is actually not exactly where the xml library says it does.

  ???

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• Airport devices not found

  Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.

  This was reported once many here recently.

  A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
    • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

• Server not found

  EVERY Web site I click on give me this error on my Mac Book Pro page:

  Server not found

  Firefox can't find the server at www.weather.com.

     Check the address for typing errors such as ww.example.com instead of www.example.com
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
  

  What is rong?

  You have security software that would block websites?

  Try disabling IPv6 (also check other possible causes).

  • https://support.Mozilla.org/KB/Firefox-cant-load-websites-other-browsers-can

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• Why do I see "device not found" airport Admin?

  I have an AirPort extreme and my parents have a TimeCapsule. They are both showing the message "device not found" in the administration of the airport. We tried cycling power etc. Our networks still work, however we can not connect to manage and backups of my parents stopped. Is anyone else seeing this?

  

  You have Back to My Mac configured on your AirPort Extreme? If so, disable it.

  This issue was widespread in the last days. We are all waiting for an answer / difficulty of Apple.

• Device not found, but internet work

  I have an Airport extreme with a capsule 2 TB that I use as a backup file.

  All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).

  I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.

  You have Back to My Mac configured on the TC with your AppleID?

  This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.

  I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.

• Airport Time Capsule device not found

  I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The internet connection is always good and the component of the time capsule router still works.  When I unplug the device, it can find him but eventually will go down in a few minutes.  I also did a warm reboot, but some results.  Printer connected to the time capsule does not, nor does Time Machine back ups.

  Would be grateful of any advice on why the drive not found error continues to occur.  Thank you!

  You have Back to My Mac enabled on the Time Capsule?

  If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.