Front USB Ports suddenly inoperative

Similar Questions

• HP a6554f: Front USB Ports not working for a6554f

  Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

  Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

  What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

  I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

  Also, is there a diagram to show where each cable goes to the a6554f model?

  As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.

• HP Pavilion P7 - 1037c: my HP Pavilion desktop computer has been moved and I can't find the front USB ports. How can I find them?

  My computer has been moved to my new apartment and set up my movers for me.  I used to see some front USB ports at the bottom of the front panel, but now I can't.  Is there something I need to do?  I really need those!

  Slide the cover down. Look at this picture.

  

  Good day!

• I have a Photosmart 3210 - Can I use the front USB port instead of port back? (back is broken).

  Hello!  Trying to help a friend.  Rear USB port no longer his plug slips outside, no electrical connection.  Tearing in the unit for her brief submeter (out of warranty, nothing to lose).  Can I use an adapter with a standard USB plug on each end to connect to a PC for printing?  The user manual is too vague on this - looks like front USB is just for PictBridge stuff.  Any suggestions/ideas will be greatly appreciated.

  Thank you

  kott2ke

  Hello kott2ke,

  Front USB port: print photos directly from your camera or storage only.

  Rear USB port provides connectivity for printer and USB.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HPE 500f broken Front USB Ports. Need hardware

  I broke all my front USB ports. Does anyone know where to find replacemnts? I can't find parts in the manual or on the website of HP.

  Thank you.

  HPPartSurfer lists the USB port double room like 517181-001. See here.  Used for sale

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• p6610f front usb ports not working not

  I just noticed that my 2 front usb ports do not work. I had recently opened it to add RAM and swap the optical drive. Could I have hit a loose cable or something?

  TIA!

  Hey vkh3203,

  I'm sorry that you run on this issue with your USB ports.

  Check the connections on the ports indicated in the image below. It would be best to go and resettlement.

  

  Taken from this link

• USB ports suddenly freeze and stops working for 10 sec after power off or powered speakers

  Original title: Usb Ports stop working for 10secs after power off or powered speakers!

  Hello

  I have no why, but my usb ports suddenly hangs for 10secs when my speakers turned on or off the power in case of operation of pc... And I have a usb mouse usb wireless keyboard and... with this problem that I can not work properly... and some times my mouse work in early upward and then I should use my keyboard to restart the pc... Then it works very well! Help me please. !

  Hi Thierry,.

  This issue does not appear with Windows that even after you perform a clean installation. So for me, it looks like a material damage. I would recommenmd get you in touch with the manufacturer of your computer and to do the repair.

  Do not hesitate to contact if you have problems with Windows in the future.

• What is the difference between the rear USB ports and front USB ports?

  Why some USB equipment only works with the USB on a computer BACK and not the FRONT USB port?

  USB ports on the rear panel carry more voltage (voltage not exceeding) the USB headers on the front...

• OfficeJet Pro 8620: HP Officejet pro 8620 Front USB Port

  Can I use the USB port on the front to connect to a computer?

  Or is it just for flash drives?

  Thank you

  Dean

  Hello
  
  Thank you for using the HP forum.

  The façade is for USB.  Use the rear USB port to connect to the computer.

  Hope that helps.

• Example: Pavl'ln Slimline s5-1: Front USB Ports NOT working

  Really need help from the experts here - model desktop HP Pavilion Slimline s5-1: H2M46AA (a Joshua motherboard with H61 Intel Chipset) crashed hard drive and have no original driver. Clean install of Win7 Home Premium SP1. Everything is OK except other devices, Universal Serial Bus (USB) bus controller. Driver is not found. After installing Win7, installed an ethernet driver and the original files Chipset installed HP Web site. All drivers OK except the foregoing who apparently controls USB ports before 2 which did not. Then, installed all updates provided by Windows Update. USB ports before always inoperative. They worked before the new Win7. After much research, unusable before USB ports seems to be a common problem, but none of the planned solutions help (check that the cables, turn off completely, Intel Driver Update Utility, etc.). On my system, the first of the 4 ID material for this device shows as: PCI\VEN_104C & DEV_8241 & SUBSYS_2ADA103C & REV_02. According to pcidatabase.com, this is identified as: "Texas Instruments USB 3.0 XHCI Host Controller" and therefore a possible problem. The ports are, I believe, USB 2.0 and not 3.0 according to Joshua documentation (http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000525 see also "\windows\inf\setupapi.dev.log" shows there is no files on the drive associated with the ID of the above material because they are not found during the installation of the driver.) So the question: How can I get these ports USB works - have installed to each HP update recommended for this system. I'm puzzled!

  You're right, it's just an update of the driver, but I think that this is specified, you can see the technique of reference:

  FTP://FTP.HP.com/pub/SoftPaq/sp70501-71000/sp70786.html

  TITLE: Texas Instruments USB Controller Driver Update
  
  VERSION: 1.12.25.0 REV: A PASS: 2
  DESCRIPTION:
  This package provides the driver for the Texas Instruments XHCI update
  Solutions of controller in the supported models that are running a service supported
  System.
  
  PURPOSE: Routine
  SOFTPAQ FILE NAME: SP70786.exe
  SOFTPAQ MD5: 9bd312c3c424161a6c3357d260dcf939
  REPLACES: SP59644
  ENTRY INTO force: 6 March 2015
  CATEGORY: Driver-Chipset
  SSM supported: No.
  
  PRODUCT TYPE (S):
  Desktop computers
  
  MODEL OF PRODUCT MATERIAL (S):
  HP Pavilion HPE h8-1xxx PC
  Desktop computer HP Pavilion p6-XXXX (Joshua)
  Desktop HP Pavilion p7-XXXX
  HP Pavilion Slimline s5-XXXX
  HP Pavilion p6 PC
  HP Pavilion HPE h9-1xxx Phoenix PC
  HP Pavilion Slimline s5-1xxx PC

• Where are the front USB ports on the HP Envy Desktop 700-210?

  I bought the 700-210 office envy because he has so many USB ports.   However, I can only find 8-2 on top and 6 on the back.   According to the specifications, there are supposed to be some at the front.   I have to take something out to find them?

  Thank you.

  V.J.R.-Savannah, welcome to the forum.

  Here is the Product Specifications page for the computer.  If you look at the picture of the computer in the link, I think the cover under the red band to slide down to expose the USB ports.  This is how it works on my 810-135qe want.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• My USB Ports suddenly stopped working

  Hello

  I connect a second hard drive on my desktop (hp dc7600 sff) and everything was going well until I was prompted to press F1 to save changes to new material. I realized my mouse and my keyboard are not 'read' via connected USB ports. I tried to change the ports but still nothing, so in the end, I was unable to choose the F1 for the recording of the new HARD drive. I tried all the other ports, but still, nothing.

  I am now faced with a dilemma, I can't go through the login screen because none of my input devices can be connected to the PC, as all modules are connected USB.

  Help. I need to return to my beloved PC usage.

  Hello

  According to the description, I understand that the USB ports do not work.

  I would like to know some information.

  1. Have you tried using the keyboard of the screen?

  Try to use your computer using the keyboard of the screen and check.

  http://Windows.Microsoft.com/en-us/Windows/type-without-keyboard#type-without-keyboard=Windows-7

  We can refer to the suggestions by Mohammed Raieed said on June 1, 2011 and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/why-did-my-USB-ports-stop-working-suddenly/11303612-0809-4A3B-a2ba-c0c6b1234e97

  You can also check:

  https://support.Microsoft.com/en-us/KB/953367

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows 8 pro FRONT USB PORTS NOT WORKING

  Hey I installed windows 8 pro on my pc but now facing a problem with the usb ports on the front of my cpu.

  They work if I restart or turn off the quick start but do not work when when my computer is in the quick start.
  I need help to solve this problem.
  I tried to update my drivers and same troubleshooted, but the problem persists.
  I even tried the updates.
  Help, please.
  can I still fix this.

  Hey I found the solution.

  DRP 13 full download and install the chipset drivers then your done.

• Pavilion p6706f front USB ports

  Where are the two USB ports before the flag p6706f?  I don't see the headphone and microphone Sockets.

  Hi jwon65 slide to the bottom of the front put your hand where the HP logo and slide it down