Frustrated on the OS upgrade... Broken record function

Similar Questions

• Records of the TWG visible to other functions within a session?

  Hello! My TWG (global temporary Table) was created with ON COMMIT DELETE ROWS;
  
  My question suppose that several pl\sql functions called by ODP.NET can run within a single session because of connection pooling.
  Is this the right hypothesis?
  
  I was unable to catch it again but did not exclude the possibility that records inserted into a global temporary Table with a
  function 'slow' may be visible to another function ("fast") before the problems of slow function a COMMIT. Worth, a quick function can
  issue VALIDATION until the slow end actually destroying records in a TWG.
  
  Am I correct in my assumptions that the data of the TWG can be removed if another function within a session issues a COMMIT?
  
  Sorry in advance, but I'm going through after the first part of my question in the ODP.NET forum as well.
  
  Many thanks in advance,

  user549560 wrote:
  Thank you, Tubby. I'm fairly certain that I can cover multiple threads in a web environment each get a connection grouped each execution of a function that uses the TWG.
  I think that it might be the situation where a function may inadvertently delete the documents that belong to another function. I doubt that I can run in a way completely series, unless
  Experts on this forum can tell me otherwise?

  Published by: user549560 on May 8, 2013 16:20

  I think perhaps you are getting confused however. The mandate of a connection pool is give a connection when asked and remove it from the pool so no other resource uses.

  So if you had "multiple threads" in your 'client' which would translate to the X pool connections. Each connection is a dedicated Oracle session. So if you have 3 "threads" you have 3 sessions of Oracle, as I said before... I'm sure that there is no way for a pool of connections to give you 2 connections to the same session (until this session is returned to the pool, of course, I speak of overlap here).

  The only way "where a function may inadvertently delete the documents that belong to another function" is when the two functions are called in the same SESSION of ORACLE.

  And you program in general for this. You provide a service that is atomic, one that does not rely on the client calling X routines before hand and hope, while hoping the client continues win the lottery and get the correct pool of connections Oracle session (because your process is based on the TWG or package global variables, and a specific state that has been defined for example). If you have a situation where you have to go back and forth between the client and the database (client must process the data of the 1 function call in order to feed the function call 2 for example) during several connection pool connections, then you program for it using things like the overall application contexts.

  It all comes down to management and the definition of the transaction. YOU need to reach this output so that the customer knows call 1 single routine is a transaction and if you and the customer agree that you have need of a return in the way I described above, then YOU must extended that out as well, and design for this.

  I can assure you that Oracle session X will never see a session Oracle Y. TWG data unless you manage to break the database and find a horrible bug that is :)

  See you soon,.

• Using a comfirmation of java script in the recording function delete?

  Hello;
  I'm writing a confirmation in Java script to delete a record. I don't want to delete all of the information table, just for the record, the button Delete is attached using the identifier. Here is my script, then the code on the page:
  
  < script language = "JavaScript" >
  function confirmDelete (id) {}
  If (confirm ('are you sure you want to delete this record?'))
  {
  document. HREF.action = "ProjectCat - Action.cfm?" ID = "+ id;"
  document. HREF.submit ();
  }
  Returns false;
  }
  
  < /script >
  
  This is the query that I'm trying to use it:
  "< name cfquery ="catMan"datasource =" "#sitedatasource #" username = "#siteUserID #" password = "#sitePassword #" >
  SELECT Categories.Name AS ViewField1, HAVE categories. CategoryID ID
  Categories
  < / cfquery >
  < head >
  < / head >
  < body >
  < cfloop query = "catMan" StartRowOptional = "" #URL.startRow # "EndRowOptional =" #endRow #">"
  < cfoutput >
  #ViewField1 #.
  < do action = "ProjectCat - Action.cfm" method = "post" >
  < input type = "hidden" name = "ID" value = "#ID #" >
  < input type = "submit" name = "proj_Delete" onClick = "return confirmDelete('#ViewField1#')" value = "Remove" > < / make >
  < / cfoutput >
  < / cfloop >
  < / body >
  
  #Note: there is the code here in my query to loop to the next and previous buttons, I just don't have this zip code as it relates to this question.
  
  Is there also a way to make the State of Java script in the place where it says, "Are you sure you want to remove this record" to say "Are you sure you want to delete #ViewField1 #? (the name of the deleted record)?
  
  Thank you!
  
  Phoenix

  just spent 2 arguments to your function js - id AND category name:

  
  and function:
  function confirmDelete (id, name) {}
  If (confirm ('Are you sure you want to delete' + name + 'category?'))
  {
  document. HREF.action = "ProjectCat - Action.cfm?" ID = "+ id;"
  document. HREF.submit ();
  }
  Returns false;
  }

  but the creation of a separate form for each category displayed on the page is
  very inefficient - you must revise your code... you have not yet
  train, really... just use to call your js function, or a
  (without any

  (Tags) you absolutely
  must have a button to click...

  ---
  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• I have the product key number I purchased through the Express upgrade. Is there a link for the download of Windows 7 professional free?

  I bought Windows 7 Professional upgrade through Express during which I contain the product key number... It seems to me not to be able to communicate with them? I need to re - install windows 7 and need a download for professional during which I contain the number of product for a 64-bit key.

  NO MATTER WHAT DIRECTION WILL BE APPRECIATE

  Kevoogle

  Alessandri keV

  Discussions were merged.

  Deleted duplicate.

  You cannot use a Windows 7 Professional anytime upgrade product key with reinstall media, it can be used only to upgrade license of qualification basis where you bought the upgrade in the first place (Starter, Home Premium).

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
  ------------------------------------
  This is how the recovery partition is accessible to most popular brands...
  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.
  For HP, press F11 directly after switching on the device
  For LG, press F11 directly after switching on the device
  For Toshiba, press and hold "0" BEFORE and during the power upward
  For Acer, press and hold ALT + F10, as soon as you see the logo
  For Asus, press F9, as soon as you see the Asus logo.
  For Samsung, press F4 to the power upward...
  For Fujitsu, press the F8 key directly after the power
  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• I'm very frustrated by the complete impossibility to organize files in Safari.

  I'm very frustrated by the complete impossibility to organize files in Safari.

  It would be nice if Apple has simply created bookmarks in Safari roughly the same work as folders in the Finder.  A simple feature, you would think but apparently a glaring omission by Apple.

  -No automatic alphabetical organization

  -A folder will be inside another folder when you try manually and reposition the (correct) alphabetical location in the bookmark list any care you reposition between two existing records.

  I used Google Chrome, Firefox and Internet Explorer and Safari in my experience is the worst of any attempt to organize bookmarks.   I am seriously considering to give up Safari, Chrome installation and transfer on all bookmarks from Safari to Chrome.

  Y at - it a soft (* free preference) who can organize bookmarks?    I looked on the App Store and I can't find one.

  Thank you.

  (* I paid a lot of money for my Macbook Pro and I don't see why I should pay more money for that Safari should do anyway)

  Try SafariSort. It's a free app.

  http://www.safarisort.com/

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• Satellite C655 - Correcting the entry hard drive record?

  I have a brand new Toshiba Satellite C655 I could correct the entry hard drive record because someone he broke and also the Start button has been removed off the Board.

  Could someone let me know by e-mail [email protected] if I can explain how?
  Also have a Toshiba U300 that is touch screen and then turns blue and switches market by itself.

  > I have a brand new Toshiba Satellite C655 I could correct the entry hard drive record because someone he broke and also the Start button has been removed off the Board.

  Do you mean the SATA connector on the motherboard? Is it broken?
  Well, I'm don't think that its easy to fix. If something is broken on the motherboard, and then for the most part you will need a new motherboard or you would ask a specialist (electronics) for help.

  > Also have a Toshiba U300 that is touch screen and then turns blue and switches market by itself.
  Try to clean the cooling fans using a jet of compressed air. Especially the laptop If OFF automatically due to a higher temperature and cleaning cooling fans can help get the best cooling performance.

• Satellite L650: How to use the microphone jack to record audio player

  How can I use the microphone to the input and the audio recording from a record player or a tape using the output of the headphone jack of the player?

  Output audio to the speakers is OK but record is severely distorted.
  OED017 of computer L650.

  Hello

  Taking microphone does not support line-in entry that allows to record the audio stream to a device.

  You can use the external microphone to record Mono sounds in your applications. It also allows to issue voice commands for applications that support these functions.

• Qosmio F30-127 is unable to read the Vista upgrade disc

  Hi guys,.

  I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

  I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

  After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

  I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

  However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

  If I try to double click on the drive icon, I get the error message:

  "D:\ is not accessible. The request could not be performed because of an i/o device error.

  I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

  I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

  Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

  Thanks for listening...

  For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

  But try first to remove the drive from Device Manager and restart the laptop.
  The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

  If she will not change the situation, then I presume that it s a failure of the equipment.

• The HD upgrade and memory issues - Satellite P200D - 10 p

  Don't cancel the warranty if I upgrade the hard disk and the memory of my laptop?

  Also is there anyway to merge two partitions on my hard drive into one without having to reformat the whole disc? For some reason, the hard disk was split into two. The installation of Vista on a 73 GB and I have 74 GB free on another partition.

  I want to upgrade the memory from 2 GB to 4 GB. What are the compatible memory modules (I model P200D - 10 p)?

  Hello

  By reformatting the hard drive you really upgrade the HD and increasing memory is a fairly simple process, so you should not invalidate your warranty.

  However if you open any part of the laptop including the crypt of memory you should make sure what you are doing and can get compatible memory, preferably set in correspondence cards.

  The software you need to merge partitions on your hard drive while running Vista is "Paragon Partition Manager. Symantec Partition Magic does not work with Vista. You don't need to reformat your hard drive, but you'd be advised to backup your critical data before the merger. A word of warning before you do anything, if the second partion maintains records of resettlement for Vista if you encounter a failure, then after you merged the two partitions, the files will remain but the relocation will not work. This is because when you insert the disc to reinstall it will search that partition. A round way, that it is to make an image of your drive before you do anything, then you can always copy of backup image and reinstall your Vista back to the factory setting.

  If you have noticed that I posted above ask you about a memory problem because I also want 2 GB to 4 GB, but it won't have it.

  Hope this helps

• How install the vista upgrade when disc is destroyed?

  Computer vista of my son had the virus and tanked. Best Buy said computer necessary, new drive hard as former disc destroyed.  Then Best Buy said they needed vista install disk to the new disk. The single disc there is the original upgrade disk. Best Buy now says he has to buy a new vista or win 7 disc original system because they cannot install it on a new hard drive with a vista upgrade disc. They also forced him buy $ 200 worth of virus protection before they would do anything.

  Something wrong here. There must be a way to recover your drive destroyed isn't here?
  Thank you
  John

  You can download a copy of Windows Vista from the following link and use the product key located on the COA sticker attached to your computer to reinstall and reactivate.

  --------------------------------

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)

  X 14 - 63452.exe, boot.wim, install.wim

  Windows Vista (x 64)

  X 14 - 63453.exe, boot.wim, install.wim

  Installation instructions

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Installation and reinstallation of Windows Vista

• Handset of blackBerry Smartphones frozen during the software upgrade.

  Hi this morning, I tried to upgrade the software on my new "BOLD", almost 6 hours later the phone is always showing 16% done and haven't done anything since. If you disable the handset it again with the same screen showing the current download. No function can be used at all, Tmobile (provider) are of no use and I can't get from the site Web de Blackberry troubleshooting tips! Can someone please help me because my camera is now a brick

  concerning

  Micky

  What is backup hanging from the Social RSS or smart card Options?

  Read this: Article ID: KB29522 "Error in backup of databases" message is received to the Options smart card database when you save the smart phone BlackBerry with the BlackBerry Desktop Software

• Windows whenever the Pro upgrade install problem

  While the windows installation anytime 7 Pro upgrade windows 7 the screen locked upwards and after restarting the screen even maintains locks and display. It is an ASUS computer (1 day old) and is the screen on that hangs the screen ASUS recovery tool. This came after I inserted a DVD to make recovery disks.

  Thank you. Larry

  Try to do a restore using the recovery partition, the attempt of the Express upgrade again.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  For Asus, press F9, as soon as you see the Asus logo.

• Windows 8 pro upgrade from Vista Home premium - abandonment of the facility after having successfully performed the wizard upgrade reboot

  I started the process of upgrading to Windows Vista Edition Family Premium to Windows 8 Pro by using the relevant DVD purchased from amazon.co.uk.

  Setup.exe automatically runs 'prepare' the PC for the Windows installation. The option allows to select personal folders are to remember, I chose 'Nothing' (I also tried another option). After reaching 100% of the given progress the PC is reset.

  The blue brand (8) window so that the circle of progress under and then all of a sudden I get an instant error on a light blue background, something like: ":-(". The installation could not be completed.

  I'm not sure of the message because it only flashes for a second and then reboots the PC. Back to the Vista, a message from window 8 installation could not be completed without further indication of what might have gone wrong.
  Some information on my system:
  Intel Pentium Dual Core 2.5
  (Pentium Dual-Core E5200)
  6 GB OF RAM
  Important: During the described process I had a dual boot OS, Ubuntu 12 and Windows Vista. Then I formatted all realizing finally that it is explicitly a DVD upgrade and it won't work for any new installation.
  In any case, I'm really frustrated by the upgrade experience. I never had something similar, not even with Trash OS like Windows Me.
  Any feedback/direction would be really appreciated. Thank you.
  Kind regards
  Dimtiris

  Hi Rohit, André,

  I want to thank you for posting on the thread.
  After some trial and error, I finally had. Here's what I did:
  I started by trying to install Windows 7 to then use as the basis for the upgrade of Windows 8 (Vista installation was not good enough since it is 32-Bit allows do not directly upgrade to 64-bit operating system)-here I was getting an exception (BLUE) screen with the error code several different so I started to answer one by one
  1 removed all USB and other devices outside mouse & keyboard (lock was apparently a Logitech camera)
  2 update BIOS of ASUS motherboard to the latest version
  3. I had two different pairs of RAM modules using different frequencies. (2x2gb, 2 x 1 GB). I removed a pair.
  Everything worked well, Windows 7 was installed successfully, and then I continued with an upgrade of Windows 8 smooth.
  Lessons learned: incompatibilities HW should consider significant problems during the upgrade.
  Kind regards
  Dimitris

• How to set the value of adjecent record

  Hello

  For an interactive report, I wanted to know, how set the value for one of the value column taken recording (the visible record in the report) adjecent to the same column in the current record.    The reason behind this requirement is, the table contains cirtain ID which is populated based on cirtain condition.  And the same ID must be set to adjecent different records.  Since this is event based on human evaluation of the data, I can not run the UPDATE command in the background.

  To simplify the requirement, suppose, report IR on the employee.  Based on the user, click one of the dummy 'comlumn link', the value COMMISSION_PERCENT must be copied to the next record.  If I know EMPLOYEE_ID value of the next record, then update SQL will do the job.  But how?

  Thank you

  -Anand

  Hi Anand,

  Please check the sample application you gave, I created the same according to your requirement.

  Here are the steps that I did.

  1. edition your column that you use as a button.

  A class has been added to this button under link attributes

  class="uButton cpycomm" role="button"
  

  URL: javascript:void (0);

  2. edited Page attributes

  Under run when the Page loads

   $("a.cpycomm").click(function(){
      var $el = $(this);
      var nextemp = $el.closest("tr").next().find('td[headers="C725254625175515007"]').text();
      var comm = $el.closest("tr").find('td[headers="C725255480705515009"]').text();
      $("#P1_EMPNO").val(nextemp);
      $("#P1_COMM").val(comm);
  
      if (confirm('Copy Commission to next record ?')) {
         apex.submit('SAVE');
      }
    });
  

  3. a process page to update the commision has created.

  Kind regards

  Jitendra