frustrated - unable to log-in after installation

Similar Questions

• Firefox "Unable to connect" message after installation for the 1st time on the new computer Windows 8.1

  Following install unable to access any site

  See this support article:
  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

• Unable to receive mail after installation of El Capitan

  I run a Mac Pro 2012 model and since the passage of Lion in El Capitan, I am unable to receive emails. I can send emails OK. I checked all the preferences of mail several times and they are correct. Internet connection is fine and everything else seems to be OK. Any advice would be appreciated. Bryan

  If the e-mail doesn't arrive as soon as you expect

  Incoming or outgoing email could take longer to arrive than you expect, or it could happen on a device before arriving on another device.

  Email delivery is scheduled by your email provider, and delivery time could also be affected by your Internet provider. If you often experience delays in important e-mail, contact your e-mail provider or your Internet service provider. If delays occur only when communicating with a particular person, that person may need to contact their email provider or your Internet service provider.

  Have you installed latest software update.

• Acrobat Connect Pro you can unable to log some after password reset

  Today, it has been brought to my attention that our Adobe Connect comments accounts get "invalid user or password. Please try again"errors after resetting his password. The same error occurs if the client uses the link 'forgot password', when an administrator selects "Send a link to reset the password for this user" and, when an administrator selects 'Set the password for this user.'

  I just closed an Adobe Connect support case that took 8 months to resolve, and I am not happy to have to call the new medium.

  Hi Bradley,.

  Rights of comments will have no possibility to connect to Acrobat Connect Pro. You will need to convert them to a full user of Adobe Acrobat Connect Pro to enable this (Administration--> Manage invited--> select the guest--> Convert to user).

  I hope this helps.

• error after installation again: CPU0:1024) VMNIX: validation log < 0 > i/o Error.

  Hello

  I have just setup the new server ESX 3.5 U4 local storage only, I did the standard method after installation of complete starting the server with the following error:

  CPU0:1024) VMNIX: & lt; 0 & gt; validation log IO error.

  It starts and begins to ping, I have a connected remote console because I can't access it or via PUTTY or Vic when I press f1 to log I get this:

  "connect servername: EXT3-fs error (device cciss (104,6)) in start_transaction.

  Interrupted the newspaper. "

  I think it is clearly pointing to a problem of local storage, so I guess I can get a new set of readers and to re - install, but would like to know the community of entry I found lots of helpful tips here.

  Thanks in advance!

  • If you find this or any other answer useful please consider awarding points by scoring the correct or helpful answer *.

  File system is damaged.

  First try to fix with fsck.

  If you also see IO error in the kernel message (use dmesg and look at the last lines), then also could be a hardware problem.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Windows Genuine Advantage Notifications stalls to "execution of process after installation.

  Hello.

  On a corporate network, with a licensed copy of Windows, I just finished installing a load of updates that a PC has missed in the last months or years.  To restart, a window titled "Windows Genuine Advantage Notifications".  I click Next and it works fine, up to 80%, then it hangs at "running the process after installation" and never finished.  It is present each time that I reboot and reconnect.

  How can I do complete, or stop to run to the log in?

  Thank you

  Steve.

  1. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  2. Restart then open IE (only) to http://windowsupdate.microsoft.com . Select CUSTOM and allow the analysis to be performed. If KB905474 is available now, deselect / uncheck and then hide it.

  NB: KB905474 may be listed in the optional software category on the left side. If an update of root certificate is listed there, also, install it to take full advantage of the integrated IE security.

  3. post a status report in response to this topic.

  PS: Are you "COMPUTER service" or SysAdmin for your company?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• NO FAX PAGE DOESN'T COVER AFTER INSTALLATION (VERSION 13.1.0) DISC FOR WINDOWS 7.

  UNABLE TO CREATE a PAGE of GUARD of FAX AFTER INSTALLATION OFFICEJET 6310 ON COMPUTER with the HELP of WINDOWS 7 64 BIT.  USED HP DISK (VERSION 13.1.0).

  Hello

  Unfortunately, this possibility of fax cover has been removed and is no longer guaranteed by any optical version 8 or 9 HP Solution Center.

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• difficulty playing legoland after installation

  I'm not smart computor. I was passed from one site to the other.  I had to download or join program after the program. All I want to know that's why after installation legoland will not PLAY. I have windows vista

  Hello

  . Thanks for your input, greatly appreciated.  As for legoland is not not compatible with Vista it says on the box "works with Windows Vista Xp/Me/98.

  I'll try and follow your advice, but again once I get intimidated and easily frustrated when I go from one site to the other. A site told me that my drivers have been exceeded. I don't have a clue!

  I was told to download the version of directx 2007 or higher, and then I wouldn't have a problem. I thought I tried, but several sites have been added to my computor so I deleted it after that the match has not yet played.

  Yet once again, I'll try and follow your advice and research sites listed. Thanks much for the tips

  Hello

  If it is said that it is compatible with vista, I suggest you follow my original advice all reposting in forum vista games

  they are experts in this field

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-gaming?page=1

• No access to ACS GUI after installation

  Hi guys,.

  I installed successfully 5.4 ACS. However, I can't access web GUI. I created two accounts admin (during installation) and techuser (after installation) and two of them are see refuse and I can connect ACS using the CLI. However, when I'm getting access ACS via web GUI, I get "access is denied. Please contact your administrator to security for assistance. "Also, I don't see user techuser in the output of CLI command show users .

  Could you please help me with this question.

  Hi NENO,

  I could see from your description, you have created two users of CLI and you are able to connect successfully in the CLI.

  But you have not created the GUI users, so it will not login in the GUI with the CLI users.

  If we do the password reset, it resets the password acsadmin.

  Please log in to the GUI with acsadmin, and then create (System Administration > directors > accounts) admins GUI as 'techuser' or etc..

  We can able to connect after the creation of GUI.

  Thank you

  Catherine

  Please evaluate the useful messages and mark the correct answers.

• Installation of elements of problems. I always get the info to download the Advisor after installation

  Version of 64-bit items downloaded 4times, installed a desinstallion delete all including the time adobe in the registry. I have alwas get the info to download the Advisor after installation! I have the file on my desktop, but nothing else!

  Hi gerhards34108030,

  I'm sorry that you are having a frustrating installation. You receive the prompt to download the Advisor because a previously installed Adobe app has been incorrectly removed. You can use the Adobe Creative Cloud cleaning tool to resolve installation problems.

  If this does not resolve your problem, we need additional information to solve problems. What is your operating system and which version of elements are you installing? This is Photoshop or Premiere elements?

  Best,

  Del

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!

• Lightroom CC hangs after installation.

  CC app has just installed Lightroom CC. It crashes after installation. Restarted, but I got the same result. I'm on a late 2013 27-inch IMac with a processor I7 of 3.5 Ghz and 24 GB of memory. Anyone know of a fix?

  Do not "delete the app", you should now uninstall using the uninstall program in the Lightroom application. After this, the CC Manager should detect it isn't here and offer to reinstall... but before that you have just tried logging of the CC PA, then insert it again, then try to run Lightroom again?

• Not able to connect to oracle after installation

  Hi all
  
  I made an installation of oracle-xe - 11.2.0 - 1.0.x86_64 and after installation, I added the paths listed below.
  Now when I try to log into oracle it gives me the error below.
  
  Paths wrong or there is something else I need to do?
  
  
  [root@beta beta] # export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe/
  [root@beta beta] # export PATH=/u01/app/oracle/product/11.2.0/xe/bin:$PATH
  [root@beta beta] # export ORACLE_SID = orcl
  
  
  [root@beta beta] # sqlplus
  
  SQL * more: Production of the version 11.2.0.2.0 Thu Jan 24 14:20:32 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the user name: System
  Enter the password:
  + ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0 +.
  
  
  =========================================
  Always gives error so try to connect in this way:
  
  [root@beta beta] # sqlplus / as sysdba
  
  SQL * more: Production of the version 11.2.0.2.0 Thu Jan 24 14:23 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  Enter the user name:
  
  
  Thanks for the help in advance.

  [root@beta beta] # sqlplus / as sysdba

  You are running Oracle stuff as root: not to do it, use the oracle user instead, for example:

  # su - oracle
  $ source /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
  $ sqlplus / as sysdba
  

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble