FTP connection with cs5.5 problem

Similar Questions

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• connection with the printer problem

  Since the evolution of the router, I can not connect with my Epson printer

  Hello

  1 Windows operating system is installed on your computer?

  2. What is the full and exact error message?

  3. what happens when you try to connect to the printer?

  4. What is the brand and model of the printer?

  Method 1:

  I suggest you mention the link and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Also check out the link for the drivers and support of Epson:

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

• FTP with CS5.5 problem on two different Mac?

  I have Dreamweaver CS5.5 on my iMac OSX10.7.5 this version that I use all the time to download on my Web Hosting site.

  I also have a Macbook with OSX 10.9.5 I use when I travel. I also loaded the same version of Dreamweaver, but I just can't put in place to communicate with my webhost. It is said

  "To view the file in your repository, you must set its Version control settings.

  I tried to do as well, but without success. I really need to be able to update my site when I'm traveling and I was unable to do so.

  I recently bought this new MacBook, I used to have an older MacBook with a Macromedia Dreamweaver version and had no problem.

  John, thanks for the suggestion, but it wasn't the problem, I finally after trying and errors it is resolved by removing the preferences and restarting my machine.

• Data connection with Vibe P1 problem

  My phone is having problem of cellular connection data connection.
  But it was working fine before the last update.
  I don't know if it's a problem of software update.
  I tried many things, I talked with my service provider (BSNL) for hours and tried everything what they suggest, all to nothing does not.
  I even used another SIM (Vodafone) to check if it was the problem of service providers, but no, the phone does not connect even in this case.
  Tried to change the APN, the network settings and so on.
  Kindly guide me and help me solve this problem.
  Thank you very much.

  Have you tried a factory reset? You have mobile data enabled in the settings?

• EA3500 connection with netflix/google problem

  Hello, I have a weird problem with my router. I can't connect to / have extremely slow access to netflix and Google (all sites of Google, Gmail, YouTube, etc.) using my android phone/Tablet and win 10 desktop. Netflix and Google works great wirelessly with my ps4. On my Xbox which is wired netflix works but YouTube app is very slow. I thought it was my ISP but they ran the diags and advised the service was very good and it could be my router. I reset my router and reinstalled the latest firmware and only these devices mentioned above still can connect to these specific sites. Linksys troubleshooting-made it so without solution. I have had this router for about 3 months without these problems. Help please. Any advice will be appreciated.

  Thank you very much! It worked! Never that. Out of curiosity why seen active IPv6 prevents my devices to connect to these sites? I need it enabled again in the future. Thanks again!

• WndOws 7 internet connection with multiple users problem

  I just got a new PC running Windows 7.  I have set up the accounts of four members of my family. When you configure access intenet (Verizon DSL) I got a window saying I could not share a connection high speed and had to set up a for each user.  So I set up a connection high speed for each user with the same login information.  The problem is that the first time that a user logs on, it works fine, but as soon as I switch users, the Internet connection is very slow or not there--Explorer said for the page to load, but it is very slow and always interrupted by and windows error message.  the broadband to disconnect and reconnect do nothing to solve the problem.  The only thing that fixes it is to restart the computer.

  Hi HWEng,
   
  This error message do you receive when you try to use internet explore in another account? Also post the exact error message so that we can help you better.
   
  You can run the troubleshooter and check if that helps.
   
  1. click on the Start button and then click Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Internet connections.
  3. follow the directions in the wizard.
   
  For more information http://windows.microsoft.com/en-us/windows7/products/features/windows-troubleshooting
   
  If you are still having the same problem then, I suggest you to remove the connection parameters to broadband and then turn off UAC (user account control). Now set up a connection broadband for all user accounts and check if it works.
  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449
   
  You can also see error messages in the event viewer. If you find error messages after return the exact error message.
   
  Measures to check the application event log:
   
  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.
   
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Oracle Discoverer 4i (Portal db - oracle 8i) connectivity with database 11g problem

  Hi all

  We have oracle discoverer 4i with Portal db (oracle 8i).

  Connect to external databases by using links in the portal db db and reports will use the link db to retrieve data from views in external databases.

  External databases, we have been connecting is oracle 10g version and now we have improved these databases to version 11g.

  Now I have a created a new database link to this 11g database and I have created a new EUL in the portal to connect to this database 11g.

  But when I try to create a report using the discoverer of this new EUL after login for the discoverer we get an "Unable to connect to the database" error.

  We all have the privilege of necesscary to the user and the new database link works perfectly well. (when we try to query directly using SQL as database portal using this db link the query works perfectly).

  I'm not sure if it is a compatibility issue in accessing an 11g database since oracle disk 4i.

  Can any advise if this is the case and if there is no work around for this?

  Kind regards

  REDA

  You say that you are having problems with a link of database from 8i to 11 g (pl exact position of 4-digit versions)? If so, expect as database of links between these two versions are not supported. Is there a reason you can't pass the portal of databases of at least 10 g 2?

  See MOS Doc 207303.1

  HTH
  Srini

• Connection with the WRT610n problems

  I can't get a wireless connection at all with my new router-WRT610 and my wired connection keeps Goin ' in and out... Any suggestions?

  I called and they understood. Comcast don't suport dual band wireless and so he got all blocked up. I have

• Connectivity with B210A wireless problem

  I have a B210A and I am having some problems trying to get my PC or laptop to connect to the wireless printer.

  Both have been implemented before wireless and now wants to connect.

  My PC is Windows 7 64 bit and the laptop is Windows 7 32-bit.

  The wireless network test report shows no problem, but when I try to connect using the installer of HP, the printer is not found. Even when you are asked to enter the IP address manually on the installation, the printer is not found.

  Someone at - it ideas about what I can do to fix this?

  Disable AVG completely and try again.  At AVG in place and active when you installed the HP software (it should have been for the installer can configure).

• Internet connection with creative cloud problem

  When I try to download a trial of Photoshop Creative cloud I constantly get an error of no Internet connection (this is not the case). Can anyone help

  paulmoynagh,

  Solution #1

  Check the "hosts" adobe entered into file. If you see entries adobe here follow the below mentioned steps.

  1. go to the location of the file "Hosts".

  WIN: C:\Windows\System32\drivers\etc

  MAC: Go to the menu finder on top > go to files > type '/ etc', press return.

  2. move the file hosts on the desktop.

  3. open.

  WIN: Open it with Notepad.

  MAC: double click on it.

  4 remove all entries of adobe, that it does not obstruct your machine to connect to the Adobe's Activation Server.

  5. rear move "/ etc" folder.

  Solution # 2

  1. check if you are using any kind of firewall (network/system) / proxy.

  2. turn off firewall / proxy.

  #3 solution (should work)

  Go to deployment: http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

  If nothing works, contact Adobe technical support to the: http://helpx.adobe.com/support.html

  Kind regards

  Atul Saini

• Licenses/download with CS5.5 problems?

  Everyone buy CS5.5 recently to get the free upgrade to CS6 and run into a lot of questions?  I purchased Production Premium yesterday (03/05/12), and aside from an initial confirmation email, I got zip since.  None of the programs appeared on the site of license (which is now down for "maintenance") which means no chance to download what I bought or obtain the serial numbers, not email with my order number, no history of my order or each transaction in my account information, online chat by specifying that it is a waiting for 72 hours to get your downloads/serial numbers rather than the time "up to". 24 hours a day"specified by email, getting transferred from one Department to another than to have the abandoned call, a wedge of 2 hours for licensing support line and no representatives available for chat...

  And of course the weekend has arrived, so I'll probably have to wait until the week next (hopefully) access to the software I purchased.  Kind of ridiculous.  Buy a product online somewhere and you have access to the download as soon as you make the payment.  Spend $ 2,000 on Adobe products and download without dressing on what is happening with the order, why the delay, poor quality web/support services, etc.

  Ugh.  Am I the only one?  Annyone else made a purchase in the last two days without a hitch, namely a Creative Suite product in anticipation of the free to CS6 upgrade when it is released?

  Other users find this type of typical experience for the Adobe purchases/support, or is usually a simple and hassle-free process?  The software itself is going to be fantastic, no doubt, but the support process control and customer has been absolutely awful.

  Things are always busy and response time extended at the time of a great novelty at Adobe.  As you saw, CS6 is released, so there was a little preparation and start-up current and increase traffic...  But you should almost always be able to access to the trial version free downloads to start with your product right away (without interruption and they are good for 30 days), until the permanent serial numbers arrive.

• Connection with customer view problem

  OK, so it's my first installation of view and I have all the installation program. But when I loaded the client on my PC and tried to enter a VD, I get a message titled "User Interface".

  I've attached a screenshot of the error. I'm guessing this has something to do with the virtual office, I created but I can't understand why. Any help?

  Thank you.

  Sorry, I read the wrong thread.  View agent installed on your virtual machine has GINA installation option.  What version of RDP you have installed on the virtual machine?  We use 6.0 on all are XP devices.

  see this KB as well

  http://KB.VMware.com/kb/1006839

• Problem of intermittent connection with ORA-12519: found appropriate TNS:no services manager

  Hello

  The users are connecting to the database using tnsentry in tnsnames.ora, everything is OK. I get complaints of intermittent connection with ORA-12519 problems. Sometimes, users are able to perform tasks on DB with no problems at all, and sometimes the error pops up.

  2014-10-31 10:57:13.0000] DbConnection::connect > connect to: "TLSDB18/***@TLSABPD9"... Got exception: ORA-12519: found appropriate TNS:no services manager

  
  

  where, as this connection will smooth usually.

  
  

  tlswrk18@illin2492! TLS:tlswrk18 > sqlplus TLSDB18/***@TLSABPD9

  SQL * more: Production of the version 11.2.0.4.0 Fri Oct 31 08:34:17 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  
  

  Please help with this problem.

  The reason may lie with the number of affected processes. Review ORA-12519: appropriate service manager found TNS:no advice and

  https://adesquared.WordPress.com/2012/06/28/fixing-the-root-cause-of-ora-12519-tnsno-appropriate-service-handler-found/

• FTP connection refused with FTP client to open the port in the firewall ESX

  Hello.

  I just installed an esx 3.5 U4.    We have an FTP server where we all night to make a copy of all our VM.

  This ESX may not put the files in the FTP server... I open the FTP client port on the 'profile terms' - & gt; Firewall tab without problems and

  I can connect with the FTP server... but... I can't do a LS for example, can I change to a different folder, I try with passive mode works... but

  It does not work.

  FTP server works well because other ESX work with her, and I do my windows XP with the same user/pass login and it works...

  Any idea?

  Thank you very much

  # ftp 192.168.18.15

  Connected to 192.168.18.15 (192.168.18.15).

  Welcome to 220 xxxxxxxx

  Name (192.168.18.15:morado): vmbk

  331 please specify the password.

  Password:

  230 login successful.

  Remote system type is UNIX.

  Using the binary mode to transfer files.

  FTP & gt; Backup CD

  250 changed Directory successfully.

  FTP & gt; LS

  227 entry Passive Mode (192,168,18,15,72,91)

  FTP: connect: connection refused

  FTP & gt;

  Looks like the second TCP connection for file transfer (which is also used in the list of directories) from the client FTP on the server fell. Have you tried completely disabling the firewall with esxcfg-firewall - allowOutgoing (can try esxcfg-firewall - allowIncoming, although it should not be necessary in the passive FTP mode)? This command sets the iptables chains of ENTRY and EXIT to accept instead of the fall.

  I tried esxcfg-firewall - e ftpClient and it worked fine for me.

  You could also post your esxcfg-firewall OUTPUT string parameters - q.