Fusion experience 6 so far and a few questions

Similar Questions

• When is MS stop support Vista service pact 2 and a few questions about the upgrade to the new version

  Hello comrades,.

  I have a few questions and concerns, and hope that you guys can share with me some lights here.

  1. What is MS stop supports the Covenant of service about the update of windows Vista 2 / other online support?

  2. my computer is vista based 32 bit, ultimate version. I heard that there are a lot of wonderful things about Windows 8. Should I move to Windows 8, or should I actually wait awhile then buy a new computer with Windows 8 64 bit attached?

  Honestly, it's a question that has been bothering me for some time. But my laptop is 4 GB of RAM, 1920 x 1080 HD display, 300 GB HARD drive at 5400 RPM (cost me a lot - it's a SONY) and have been works very well even with vista, the operating system highly complainted by many others. I think it would be a waste to buy a new computer, including the so-called net-books and i - PAD, I know, they are beautiful and sexy, but looking at their record, I was speechless. Yet knowing 32bits was maximum and MS has already announced that they stopped support for Vista SP1, consider that SP2 is expected online.

  3. how long do you 32-bit based can last? Should I increase the RAM of 4 GB to 6 GB and upgrade to Windows 8?

  4. How about 64-bit based of the future? Or is it true that most of the computer manufacturing starts in the future these application device of the base (not the real computer-driven software)?

  5. or should I forget it all, wait 3-4 years, until my laptop would be a museum piece, then buy a desktop computer which monitor and hard drive is all separated, knowing it is the best technique for the $s and phone for mobile computing laptop use there?

  I understand that this is somewhat a personal decision, but I really appreciate you guys Preview on the path of the operating system! Thank you

  Yes it will work to buy a copy upgrade of Windows 8.   This is a custom installation rather than an upgrade in place once you switch between 32-bit and 64-bit.  However you can still save money by buying the upgrade license.

  More important is that all the drivers you need will be available.  Your computer manufacturer will not write drivers for Windows 8 because the computer has been out of production far too long.

  Windows 8 is a significant departure from previous versions and I suggest that you upgrade to Windows 7 If you are tired of Vista or wait until you buy a new computer before Windows 8.  You read the discussions on the forums of Windows 8 CP.  At this point, there are many critics of Windows 8 due to the removal of the Start button and Start Menu.  Many people dislike having to rely on style Metro Screen start for many things.  It is becoming a major concern.

  To navigate to the Windows 8 CP forums use in the middle of the dropdown at the top of this forum page.

  Note:  Microsoft has not announced that there will be copies upgrade for Windows 8.  Microsoft has already stopped providing copies of upgrade of Office is not yet clear what will be available for 8.

• Pavilion x 1035: upgrade to SSD and a few questions.

  Sorry if some of these questions have been answered, but I've been reading for hours and really have not found an answer.

  I have a x 1035 Pavilion M6

  (1) I have a 500 GB Samsung 850 EVO HD I would install. According to the properties of the disk my Pavilion is a space 576 GB HD is this drive to small or compress it used cloning of adjustment (sorry showing 446 GB)?

  (2) I still have to make the recovery disks, but it would be better to do a new install?

  (3) I have a full version W7 can this be used? I don't have product key for my current installation, but do not know if I remember receiving OEM disc.

  (4) I did a more recent return as today, can I restore back to who?

  (5) th DVD rom can be removed and allows you to add a second HD?

  Yes, you can use an optical drive bay adapter to fit a second hard drive. You see this as purely for storage because: 1. not bootable. and 2. turns at SATA I have 150 Mbps speed only. Still fast enough to playback video, but much slower than SATA-III 600 Mbps.

  The best way to transfer settings is with Windows Easy Transfer. Make the 'old computer' Easy compressed Transfer of the old installation file, save on an external and then use the "new computer" transfer tool on the new configuration. Adjustment of the installation of the new on the SSD using the same Userid as the original installation made work better. It will transfer more stuff as Favorites, recorded the wireless identification information and other things which otherwise is very much work to reproduce. You can also use Easy Transfer to move docs, pictures, etc. on or just configured to save and transfer settings.

  https://www.YouTube.com/watch?v=wP0FlKRK6-w

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• API of OS, JDE and the current storm and a few questions

  Hello.. can someone tell me what is the

  current operating system

  Current blackberry JDE

  and for touchscreen there API and additional details?

  who is the first JDE that supports touch screen.

  Thanks in advance.

  "4.7 is the first that has support for display of taouchs or there is also a precedent?" - 4.7 is the first.

  "If I develop any application on 4.7 while it will be compatible with 4.5?"-No. forwards is supported, not backward.

• Help with application of TLF and a few questions

  Hi guys,.

  I am a newbie with TLF trying to create a desktop gadget the basis for the management of contacts using TLF. Contacts are received from a server.

  TLF is used for the display of contacts.

  
  I encountered some problems. So I need help.
  My layout is as follows
  TextFlow container size is 700 X 600
  Each contact has the following structure

  Each < Div > contains the contact data.

  KWICKS MARKUP XML is as... (but I have not used the XML... I created this in through code using the div, element of paragraph

  and elements span etc)

  
  < DIV >
  < P >
  The USER < SPAN > </span > NAME (TEXT)
  < /P >
  < P >
  IMAGE (Image Online)
  < P >
  < P >
  DESCRIPTION (TEXT) USER < SPAN > </span >
  < /P >
  < / DIV >
  Layout of columns is 2

  Ideally, I want to show 4(can vary) contacts at a time... Please see picture.

  I added contacts to Textflow and set the size of container to 700 X 600 and 2 coulmns.

  Problem:
  Sometimes, when I try to fill in the details for example: If the DESCRIPTION of the USER is too large, the text overflows
  2nd column, and he gets overlaps the first contact in the first column
  example of a link to the image if 4th contact description data are very large.
  whenever the dynamic text is no longer, the text overflows.

  Also, I don't want to use an individual textflow for a contact, because it will be difficult to manage?
  (or would it be easier?)
  Ideally a single stream has several contacts is required.

  Issues related to the:

  1] how to avoid overflows?
  Is there a way to know if the textflow is filled with text, or go over the top?
  Even if I can know whether the following contact data is going to overflow, I can put it on the next page

  [2] is the way to choose individual < DIV > elements .programatically. IE: cross the textflow.
  I want to be able to search for contacts on this basis. Description of user name and the user
  So I want to browse each thr div and move the < P > / < SPAN > text nodes username and userdescription and looking into it.

  [3] also, I want to be able to draw a border around each < DIV > element... thin red border.

  

  
  I had the example of columns by reference.

  Help, please.

  Thanks in advance.

  Amit

  Watch ContainerController.textLength; This gives you the number of characters is made up in this container. Add this value for each controller, subtract from the textFlow.length

  For the first paragraph, try textFlow.getFirstLeaf () .getParagraph (). Then call getNextParagraph() to get those successive. There is no equivalent for DivElements so you need to browse the hierarchy of streams (recursive calls to FlowGroupElement.getChildAt) and use the 'is' operator to check if a child is a DivElement.

  Borders for feed items are not supported natively by TLF. You will need to draw on the container after you determine the positions of the lines corresponding to the compound. BTW, have you looked at the components Flex Gumbo text such as TextArea which are built on top of TLF and are skinnable, so you can easily specify styles such as borders?

• Doubt FNDLIBR and a few questions

  Dear all,
  
  Help me to update my knowledge, here some of the questions that I have doubts
  
  1 FNDLIBR (we usually use FNDLIBR to test concurrent managers are running or not) if FNDLIBR is any program and if it is deleted then is it possible to regenerate? If so, how?
  
  2. What is the concurrent manager cache? When we define the size of the cache manager for simultaneous? Can resize us the cache size? If it is low, then what is the impact on demand?
  
  3. is it possible to remove the user from the app (we can end it I know)
  
  4. If a patch of long term as it turns more than 10 hours, if it fails in the meantime to 6 hrs and metalink suggest to apply a pre-required patch how to record 6 hours we already spent?
  
  5. What is the difference between ad_applied_patches and ad_bugs?
  
  
  Thanks in advance.

  Hello

  1. you can generate some FNDLIBR using adadmin
  Maintain Applications files Menu - > connect the Applications programs

  2. Manager competitor chooses request queues of SIMULTANEOUS REQUESTS of DNF, he will pick up the number of requests defined by the size of the cache of a sudden & will work on them before going to sleep.
  At what point in creating custom managers simultaneous, if keept you cache the value null means 1 at a time.

  3. If you want to remove access for a medium user Application, ending with the responsibility of the system administrator

  4. use of adctrl (AD controller)

  5.
  ad_applied_patches - it contains information about the fixes applied on the system,
  ad_bugs-information on all the bugs and patches that have been included in the applied patches.

  Thank you
  Amelia G
  Expertise in Oracle applications...

• Satellite L500D - SSD and RAM upgrade question

  Hello

  Who are you? Ttime for some great upgades for this laptop and some few questions and I'll be happy to answer for me.

  1. is there an empty space to install a second hard drive SSD?

  2. If there is not can put off the hard drive DVD and in the empty space to fit an SSD? I need something like that? ---> fb4d http://cgi.ebay.com/CF-Card-2-5-Serial-ATA-SATA-SSD-HDD-UDMA-Adapter-/190537923405?pt=LH_DefaultDomain_0&hash=item2c5cf1
  This is an adapter.

  3. the quantity of RAM max supported Satellite L500D? I installed 2GB and I have an extra plug and I want to install a single 4 GB RAM and 6 GB RAM total

  Its sounds good to you this idea? I thank you and have a nice day

  Hey,.

  As you can see on the underside of the laptop doesn t supports a second HDD because there is no second Bay HARD drive on the underside.
  The map you posted is unofficial so no one can say whether it compatible s part or not. For laptops Satellite AFAIK there is no CD/DVD Bay adapter, but you can ask a provider of service authorized for more details.

  The maximum RAM capacity depends on your phone model correct. L500D was delivered with different hardware, so you must post your exact model laptop number.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Type questions NMH405 Impressions after the first few days - and a few beginners

  Hi all, after some research I made the plunge and acquired a new NMH405 (I really wouldn't have no existing "NMH400" i.e. no discs).  I removed the 500 GB drive and added two new drives 1.5 to WD Green Caviar and set up in Raid-1 after a few messages of error and waiting for a very long time, so that readers resynched I managed to get online as z-drive on my vista system.  I played a bit with the built-in backup tool (I like it!).  I tried the builtin player after placing some of my iTunes on the pole media albums and decided that I didn't really like this option for many.  I then simply moved my itunes on the MediaHub libraries and used iTunes on Vista as a front-end application.   It works very well.

  I have a few questions, probably show my limited knowledge of readers connected to the network.

  Q1.  Is there another way to turn off the device by pressing the bottom on the NMH405 (aka my NMH415!)? When turned off, I assume that the only other way to power it on again via the background?

  Q2.  I noticed that the device is offline for centuries after having recycled Windows Vista or the hub itself.  Why is this? And what can I do to put it online in an orderly fashion?  There must be a way to get that ugly red crossed NAS showing green and online as a z-drive in 'My Computer' much faster.

  Q3.  I reformatted the drive of 500 GB that the box came with, added to the drive enclosure box and attached the port USB in front of the NMH405, after awhile he said on the Panel until she had detected the drive and asker if I wanted to import content.  I refused (partly because he was empty!).  Now, how do you get this drive? (Occasionally), I would use it to backup my Raid-1 configuration files (most recent do you know what might happen there...).  How to use this USB disk attached?  Also, I noticed that it does not appear in 'My Computer' - in fact "computer" in windows?  Add directly to my windows system it is detected instantly?

  Thanks for the pointers or responses to improve my user experience.  I'm still learning here.

  Best regards

  Q1. Your correct, there is only one button on the front for the start/stop. There is an option to restart the device inside the web interface through the configuration > system option.

  Q2. It depends on how fast your network can establish a connection, a mapped network drive is fine but I noticed that it slows down the process startup or logon when you turn on the PC. What I did just create a shortcut on the desktop (site \\nmh410\media) that points to my mediahub and did not map the mediahub more to drive z.

  Q3. If it's still a drive of 500 GB fresh with nothing on it, then you will need to create a partition on it firstly the external USB drive by connecting directly to the PC. Read this Microsoft article on partitioning. In my view, that an external USB drive icon will not be displayed on the PC from the external USB drive is plugged into USB port of mediahub. To access this disk external USB which is plugged into the USB port of mediahub, I simply create a shortcut to \\nmh410\media\device . For backup, you can use the NTI Backup software that accompanies your mediahub.

  See you soon.

• A few questions about After Effects and CGI (computer generated images)

  Hello

  I am very new to this forum and After Effects. But I have a few questions.

  Now, I recently started a film project with my friend at a workshop. It's an action/sci-fi film and I'll probably be the editor and, if necessary, support visual and special effects. This looks like a pretty big job for a noob, but we do not have a limit of time with the project, so it's time to learn.

  But my questions. I thought to myself of the introduction of CGI (very simple of course). I studied the use of blender, and I think that I'll use for modeling and animation. But Ae should be used in any stage of production of CGI or make in a blender? If I do, how? I'm going in the wrong direction (bad kind of software, etc.)?

  In addition, I do not speak of fully producing the scene with the computer, but by adding things like the characters or objects, may be special effects.

  I'm hoping for an answer to my questions, but if you only have one or two responses, I'm happy to hear also. You are also welcome to correct me if I misunderstood something. Thank you for clarification if you need!

  pek859 wrote:

  1. I am very new to After Effects and this forum. But I have a few questions.

  2. now, I recently started a film project with my friend at a workshop. It's an action/sci-fi film and I'll probably be the editor and, if necessary, support visual and special effects. This looks like a pretty big job for a noob, but we do not have a limit of time with the project, so it's time to learn.

  3 but my questions. I thought to myself of the introduction of CGI (very simple of course). I studied the use of blender, and I think that I'll use for modeling and animation. But Ae should be used in any stage of production of CGI or make in a blender? If I do, how? I'm going in the wrong direction (bad kind of software, etc.)?

  4. in addition, I do not speak of fully producing the scene with the computer, but by adding things like the characters or objects, may be special effects.

  5. I'm hoping for an answer to my questions, but if you only have one or two responses, I'm happy to hear also. You are also welcome to correct me if I misunderstood something. Thank you for clarification if you need!

  1. Welcome to the family. AE is big, very big. It's hard. Really hard. Not sure how hard AE is learr and master.

  2. no time limit is good, but you will need the money.

  3. This is not a forum of Blender. You want to discover the film, CGI and Blender own forums for this kind of assistance.

  4 AE is for your compositing and special effects. But you will need to learn how both apps work until you decide how to distribute your project. A comparison would be shooting your film. Using a digital SLR? Do you know why? Or do you use a GoPro? Another example may be Apple Final Cut Pro. You can edit the audio in it, but it is preferable to use an audio application. You can do special effects in FCP but it is better to do complex things in motion for After Effects. How can you know what app is appropriate a lot of experience. Many failures.

  5. we were all new EI vidoe editing and special effects at one time or another. The user forums are not places to learn how to use these applications. Do you with tutorials, books and tons of time. One thing is to learn how to use the Blender to make a robot move. Do the robot into a character that requires the public to worry, it is quite another. Using AE to create a layer of clouds is one thing. With these clouds react to bow waves created by your robot flying as it closer sonic speeds is quite another challenge.

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• Update video card (and a few other things)

  A few questions about upgrades: first of all, can I upgrade the video card in my HP Pavilion P6000 series p6616f?  Current card is ATI Radeon HD 4200. If so, can you suggest the best replacement that can handle games? I have to upgrade the power supply too? I also think it came with 6 GB ddr3 ram. Can I put that as well... and what is the maximum it will take?

  SomewatStodgy, welcome to the forum.

  SomewatStodgy wrote:
  

  A few questions about upgrades: first of all, can I upgrade the video card in my HP Pavilion P6000 series p6616f?  Current card is ATI Radeon HD 4200. If so, can you suggest the best replacement that can handle games?  Yes, you can install a discrete PCI Express x 16 video card.  I love EVGA, Sapphire, XFX and PNY in that order.  It should be not newer than the HD 6000 series.  Latest maps (HD 7000 series) require a UEFI BIOS on the motherboard works properly.  It is difficult to know which card to recommend.  You will need to check the system requirements for the games you play to find out what is recommended.

  I have to upgrade the power supply too? I also think it came with 6 GB ddr3 ram. Can I put that as well... and what is the maximum it will take?  Recent mid-level video cards require a minimum of 400W to work properly.  I normally recommend at least 500W.  I love Corsair products that will give you more choices for video cards.  I believe that the existing PSU is ATX standard.  You can measure the existing PSU and compare the measurements to the one you choose.

  Here are the Specifications of the product for the computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• When I watch a news clip or anything this either with his stops and a few minutes later she does it again.

  When I watch a news clip or anything this either with his stops and a few minutes later she does it again. Can someone help me with this problem. I just watch something unless it is interrupted.

  Hi suzyra,

   
  1. What is the operating system installed on your computer?
  2 are watching you the video online?
  3. in the affirmative, you use Internet Explorer to watch videos online?
  4. What is the version of Internet Explorer installed on your computer?
  5 are you facing this problem with any particular Web site?
   
  I suggest that you follow the steps in the link and then check if it helps.
  The video problems with Internet Explorer

• I restored my computer after a hard disk failure. Everything seems to work normally, but I can't find one of 'My Documents' and a few other folders are also lost.

  I sat at my computer as he slept. When I wiggled the mouse, I got a notification of "hard drive failure. I restarted my computer, the windows Defender attempted to fix it, but to no avail. I went to the control panel and went to restore. to restart the computer, everything seemed normal, but all my documents are now lost, and a few files from my office.

  Hello

  If you have had a hard drive failure a system restore does not resolve that

  and windows Defender does not attempt to fix anything

  It is used to remove spyware

  read this information on the link below because I think you may be infected by the Malware

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct deletion for that malware, if it applies to you

• Backup center and restoration', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel not responding

  Original title: clicking on but nothing happens

  When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?

  Hi Ron68PB,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open other programs?

  3. do you get error messages or error codes?

  Method 1:

  You try to run a SFC scan to check the corrupted system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Alternatively, you can try to check if the problem occurs in safe mode.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer