G4 will not start hard fast motor running

Help, I have a...

G5 processor 1.6 Ghz, Mac OS X (10.5.6), RAM 1.25 I use not. recently, I need to find some old documents about this store, so I tried to start it and I hear the ping of start-up and the hard drive starts spinning and then it continues to become stronger and stronger, but on the screen, nothing happens. on an attempt I got a message that I've never seen before, which send I need to restart the computer.

This message was not in your typical dialog box. It was written in big letters on the screen in big letters and it's in English, French and another language. as per charge, started again and I tried many times. I tried the thing of Landau, did not work. any suggestion would be greatly appreciated. Thanks in advance for your help.

Hold down the SHIFT key at startup... did do better?

Hold the option key or the ALT on startup, did show the choice of start?

It has been disconnected from power for a long period of time?

Tags: Mac

Similar Questions

Since graduating from version 22 (updated channel version), I had a few days with a very large text; Today, Firefox will not start. How to run again?

I searched a file in Firefox program .exe files, but it doesn't seem to be any where. I would like to uninstall, download a new program and reinstall, but I will not lose rather bookmarks and other settings.
Running Windows 7 on a Sony Vaio laptop. Any suggestions? Thanks in advance.

Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox, you WILL NOT lose any bookmarks, history and settings. Please follow these steps:

Note: You can print these steps or consult them in another browser.
1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
3. Remove the Firefox installation folder, which is located in one of these locations, by default:
  - Windows:
    - C:\Program Files\Mozilla Firefox
    - C:\Program Files (x 86) \Mozilla Firefox
  - Mac: Delete Firefox in the Applications folder.
  - Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
4. Now, go ahead and reinstall Firefox:
  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!

Speech recognition will not start and continue to run

I am running vista 32-bit Home Premium edition. I finished the speech recognition session setting the microphone. I finished the tutorial. However, no voice recognition program continues to run. When I run the program of recognition (or when it is started automatically to the 'start-up', it starts to run and then goes into "Sleep" mode for a few seconds and then on 'Off'. The second time, I start speech recognition he will say 'Start speech recognition' and then go directly to 'Off '. When I click on the microphone icon in an effort to implement the program "On", I get an error of speech recognition that says "Please restart speech recognition. It is said in the body of the error message "speech recognition has encountered an error. Please restart speech recognition to ensure that you can continue to use the speech recognition". When I restart speech recognition error repeats.

Although the speech recognition tutorial seemed to work, the real speech recognition program doesn't have.

Does anyone know a fix for this problem? Thank you.

Hello Dirleton,

Thank you for your message. For testing purposes, could you try creating a new account on your computer? The process is described below:

* make sure that you logged in with an administrator account *.

1. click on the 'Start' button > right click on 'Computer' > select 'manage '.

2. click on the arrow pointing down next to "local users and groups.

3. highlight "users."

4. in the right pane, right click and select 'New user' (enter information, then select OK)

5. now right click on the new user and select "Properties".

6. Select the "Member" tab and click on 'Add '.

7. in the box type 'Administrators' and click on "check name".

8. click on OK

Then log off your computer and connect again the new account. Test the speech recognition, this will rule out a problem of profile corruption. We can then troubleshoot further.

Please let us know if this or don't help solve the problem.

See you soon

Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Equium M50-192 will not start - HARD drive problem?

Hello

can someone help me please
I had a Toshiba laptop. I had for about 3 years, every time I turn it on it gets to the Toshiba logo, but won t charge up.

So I tried to put the recovery disk in and boot from the disk or try to restore but it won t anything off the drive, it gets the full recovery of the hard drive, but when I select the option to do this, it just says: for a drive partition error checking please try again?

My hard drive is not partitioned. It also makes a funny clicking on in the touch mouse pad is one then after a while a beep. I left it and woke up and it was like that

Sorry I'm not very good with computers of m.
If any 1 got any idea please help

Just noticed in my bios it says hard disk = none?

Hello!

What Satellite laptop do you have?

I think that your HARD drive is defective, but you can check with the Drive Fitness Test.
http://www.HitachiGST.com/HDD/support/download.htm#DFT
Download the image, burn it to a disk and boot from it.

Good bye

Windows Update will not start work until I run the update utility.

Original title: Windows 8 - Windows Update

I have a desktop with Windows 8. Pre-installed - computer is 1 year.

Whenever I run my Windows Update to download/install updates - it always shows as downloads but it comes in fact does nothing and just "of the acts' as is the download but nothing happens. Then I run the windows update convenience store (in Control Panel) and he told me that the problem is "fixed". So I run windows update again and it works.

But the next time it's the same thing as above - doesn't work - run the troubleshooter, and then it works. I need to run the troubleshooter and to resolve the problem, almost everytime before the windows update will work.

How can I get a permanent fix?

Hello

I suggest you follow the steps in the link below. Chose Windows 8 option from the menu drop down to follow the correct steps.

Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

http://support.Microsoft.com/kb/947821/en-us

Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

(Redirected) Alienware X 51 R2 will not start. Repair of the system sees no HARD drive

Hey,.

My X 51 died and I can't get it to work. Looking for suugestions.

After months of random boot errors and re-formatting my HARD drive a few times it will not start upward. It starts either error that says "no found boot device" or it goes to a screen of "diagnosis" of dell alien ware which basically ends with a message saying either

-reboot again

-Advanced options > recovery cd, repair, ect.

When I try to use the windows recovery CD 7 he does not see HARD drive (no HARD drive installed, that it is, I reinstalled it a few times too to make sure it was not a coward).

-J' have a HARD drive, usb drive, and when I took out the HARD drive I can access my files NP via laptop, so I'm not confident, that's my HARD drive which * out.

Now, before all this happened, I had to reformat my computer because it was literally so slow it would take like 5 minutes to open a folder (potential virus or something I don't know) and me random boot errors.

Someone at - he had a similar experience?

Better in this position in the Alienware owners Club Forum, here:

http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

Bev.

Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

Laptop will not start. Ran startup Memory Test-am failure

Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

Product ID: B8M97PA #UUF

MEMORY MODULE

Window7 as operating system

Any help would be much appreciated!

Hello

Try the following.

First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start. If it doesn't, try the same module, but in another location. If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

Kind regards

DP - K

When you try to install Windows XP I deleted some unwanted partitions on my hard drive and now my computer will not start.

original title: file system

Finally, I tried to install a new xp on my pc, I had to remove some unwanted parttions and trying so I deleted some system files and its caused me

problems with my laptop will not start again.

I try to boot from a cd, but it keep posting so tat files cannot be copied. to restart and boot from the system itself is not also possible.

I got a copy of my xp on a USB but I can't get my laptop to boot from it

I need help badly thanks

pc files cannot copy

Cannot copy the Office

Win87.em

Win_dos-chm

Windows.hlp

WinHelp.exe

WinHelp.hlp

wininstP.chm

WMIC.chm

wmifltrlW.chm

wmiscmgr.dll

windW.chm etc.

Sonyvaio11, xp professional

Hello

not all motherboards were Boot from USB active

Make sure to set the ot of CD/DVD drive USB key to be 1st in the boot order to boot from the XP disc

to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

Change boot order it do dvd drive 1st in the boot order

http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

How to clean install XP

http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

___________________________________________________________

Here is the vista forums

Try the forums xp on the link below

http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

Answers by topic

Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

I am at a loss. Help, please.

Thank you

Kevin

I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

You must also update the BIOS.

All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

Hello

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_free

SuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

-----------------------------------

Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm

Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx

----------------------------------

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

After the removal of malicious programs:

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

======================================

If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).

You can try a repair install or an upgrade in Place.

You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).

On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

How to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

=======================================

For extreme cases:

Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp

================================

If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.

Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

G5 will not start. LED light on. Fans before working.

Early 2005 G5. running 10.5.8.

G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

Sam

Some of the fundamental things include the pram/clock battery replacement

since they may be dead; then with a power failure, sometimes the Mac

do not restart. Usual power management unit & reset NVRAM/PRAM are

methods that sometimes also used as a troubleshooting measure.

• Reset the Mac chip power management: (see SMU)

http://www.thexlab.com/FAQs/resetpmchip.html

• How to reset NVRAM-LANDAU on your Mac - Apple Support

A hard reset can sometimes be used, where the power is disconnected

the logic board and power removed from grill; Then push the Start button / stop.

(But maybe not. Several PowerMac computers, I had, some people found this helpful)

You may also remove and reposition cards and other items

the inside of the case, to be sure they are connected properly. Be sure to not

In short anything, due to the static load or residual power in the circuits.

The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

can help to put it on again. Also sometimes the power supply has some faulty fans,

circuits or capacitors, so they can be troublesome to repair or replace.

Good luck in this case!

iMac will not start. From sound and sometimes Apple, but no further details. How can I get?

Just got an iMac and it will not start up. I can get the sound start and, sometimes, the Apple logo, but it stops there.

Have tried to use 'command-option-P-R' together. Have you tried "D". Tried "control C". Are there other possibilities that I could try?

Install or reinstall OS X from scratch

Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

HD recovery start:

Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

Erase the drive:

1. select in the main menu disk utility and click on the continue button.

2. once the charges of THE select your boot volume (usually Macintosh HD) in the

list on the left. Click on the Erase tab in the main window of THE.

3. set the type of format Mac OS extended (journaled). If necessary, click

Security and button all the option data from scratch in a single pass. Click

the clear button and wait until the process is complete.

4 leave FROM and return to the main menu.

Reinstall OS X: Select reinstall OS X and click on the install button.

Note : You will need an active Internet connection. I suggest to use Ethernet if possible

because it is three times faster than wireless.

This should install the version of Mac OS X that you had installed it.

If this does not work then your hard drive has failed and must be replaced. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

HD will not start from host organization but will be of a different MBP

((Two Mbit/s: 1) mid 2010 i5 model 1) Middle model i7 2011.

From here, I will call them as "i5 and i7.

The i7 was having starting problems. The taskbar would charge about 2/3 of the way in which it would "hang up" then the screen turns off. Unsuccessfully trying to boot in safe mode. Verbose mode would freeze as well. Tried the single user mode and run ' fsck - fy "and it made no difference. No idea how fix permissions with the utility El Capitan disk but I'm not sure it would make a difference. Doesn't it?

I then did a backup/clone of the i7 to a new external storage disk. All programs and files are successfully transferred.

Then I wiped the i7 with a clear three-pass and reinstalled OSX.

Error #1) I have not test to see if the hd now Virgin began its host computer before you restore the old files.

Error #2) I put the clone on the i7 copy using Super Duper.

When installing the i7 to its host computer, it wouldn't boot in any mode just as before.

* Comment: The i7 will start the i5 laptop when connected via USB in system preferences > startup disk.

I am currently using the i7 connected to the external i5 as I type this.

Disk utility has been run on the i7 at this point by indicating zero problems.

Onyx has been run through all the options and check marks with no problems.

Always the i7 will not start its host computer.

I am very confused.

Issues related to the:

(1) why/how this phenomenon occur?

(2) in making the i7 clone for external storage, if there was a hidden virus or something on the i7 origin, is the now compromised storage device?

I read it twice and I'm still a little confused.

When you cloned the i7, you do it from the other computer?

I get the i7 disc starts from the i7 computer when it is connected to the outside. Is this correct?

If the player starts in an external of the i7 box, but not in the computer the case most likely is the SATA cable to the hard drive.

Try to replace.

Kim

HP P6280 desktop will not start

Hardware: HP Desktop, 2.5 Ghz/6 GB RAM 6280

Software: Windows 7 Home Premium

Symptom: Slider, upper left corner flashing. Will not start windows. Does not start the system recovery

Tests: will start at diagnosis; all components are

Visual: all current fans running, hard drive access light blinks.

Tried:

1. how to remove the card reader and re - start with a statement found here. No change

2. removed the hard drive and connected to another computer via the USB interface. The road climbs and all the folders/files are present

3. re-installed the hard drive and the boot order changed to search first of hard drive. Still no change.

Question: Do you think a FIXBOOT is possible hard disk using a different computer with the hard drive via the USB interface?

Any other suggestions would be appreciated.

Hello

Please use the following link

http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/black-screen-w-blinking-cursor/TD-p/1330837

G4 will not start hard fast motor running

Similar Questions

Maybe you are looking for