Garmin Communicator does not

Similar Questions

• Why not voice communication does not work in windows live messenger

  Hello
  before that my version was battery Bluetooth for windows by toshiba v5.10.04, in windows vista, it does not work in voice communication in windows live messenger, but it works in Skype.
  now, I'm updating to the new version v5.10.12 (T), the problem always even with the 5.10.04 version
  Please help, how can I sign in to windows live messenger and can have voice communicate in windows live messenger

  Thank you

  What headphones do you use for this?

• Serial communication does not work in an executable file.

  I created a vi that communicates with a serial device. It works fine on the computer on which it was created on. I then created an application and then built an installer to put it on another machine. The second machine doesn't have a LV 2009 on it. Once installed on the machine the vi does not work. When it is running on the computer with LV 2009 the com port control is a pull down, and it lists all agrees on the computer, and then you select the one you want to connect with. The vi is installed on the computer does not list the available com ports. This leads me to believe that there is no support Comms series in the installable version. What should I do now? I noticed that you can add "Additional installers" when you build the installer and one of them is NEITHER Serial 3.4. I'm trying to add this and a message says that he had to get, so I used it thinking it was more that I needed and this standard com port driver would be included. Am I mistaken or did I miss something? Any help is greatly appreciated.

  [email protected]

  I'm sure that NEITHER Serial is the driver for COM port cards of NEITHER, and that very probably that you have to install NI-VISA.  You can add the VISA installer as an extra Installer for your application.  It may ask you a DVD during the build process, because even if the software is already on your computer, the installer so it probably isn't.

• MY GARMIN EXPRESS DOES NOT OPEN

  IM TRYING TO OPEN THIS PROGRAM BUT WINDOWS FIREWALL IS PREVENTING ME FROM DOIN THE UPGRADE ON MY NUVI 200 YOU CAN ENGLISH ME OR HELP I WOULD BE VERY GRATEFUL... KURT

  Hello

  Security programs can affect the communication between a computer and the servers of Garmin. It may be necessary to disable security programs allow Garmin express communicate. See the instructions provided by the Publisher of the application to disable any security programs installed on the computer.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Refer to:

  http://support.Garmin.com/support/searchSupport/case.faces?caseId= {dd8e8b20-ef1e-11e2-7dd9-000000000000}

  http://Windows.Microsoft.com/en-us/Windows/Firewall-FAQ#1TC=Windows-7

  I hope this helps.

• Visa series executable does not

  Hi LV

  I LV 2010. I created a VI to control the DC motor via the serial port. The VI works fine. But if I create an executable and run it on the same PC communication does not work. Please someone advise me.

  Ananth

  the problem is resolved. I closed the app LV (LV cause used the COM6) and run the executable file and communication is correct.

• OfficeJet Pro 8600 desktop shortcut does not open

  Het all. I just replaced my old HP 4180 with a new Officejet Pro 8600. We have three computer that connects to it, and the shortcut on the desktop to open the software of the printer communication does not work only on your laptop. I used the installation of itentical on all computers. The Office has the full package software and two laptops have only the basic print and scan package installed. I checked the target of the shortcut on two laptops, and they are identical. I also tried to disable the antivirus and firewall software, but that made no difference - still unable to open the software to set the printer preferences, etc.

  The laptop in qiestion is an EeePC H1000 running XP 32 bit, SP3. BTW, the laptop that has no problem is an identical unit.

  When I select the shortcut, the hourglass appears for a few seconds, the wireless icon flashes as it appears that the software is attemptong to connect to the printer, but the window indicating that it is retriving the device information will never appear and therefore also the printer wizard window also never appears.

  There's no problem with printing. Just get the Printer Wizard to open. Also for the record, if I select the printer in the Control Panel printer and faxes section, can I get the printer properties and preferences windows and make changes, but no way to get the companion window.

  I tried to reinstall the HP software without change. I also tried a "repair" and also no change.

  Any thoughts appreciated as to what else to look for that may be causing my problem.

  Finally, find my own solution. I followed the instructions in the Support Document HP c03640384 HP Printer Wizard opens with an error in Script or in Notepad.

  Even if it wasn't exactly my problem - I was just getting no response at all, - using the patch of registry (for my WinXP) of this document got my desktop shortcut does not work to open the Print Wizard.

  http://support.HP.com/us-en/document/c03640384

• Garmin does not connect after upgrade 9.3.2

  I have a Garmin Frontrunner 235, which connects to my iPhone (5 s) via Bluetooth.  It all worked perfectly until I upgraded my 5s to iOS 9.3.2 recently.  Now the phone sometimes cannot 'see' the favourite, and even when he can, he refuses to connect.  I noticed that Garmin has released a new version of Garmin Connect, but that does not solve the problem.  This becomes a real pain.  Is there a solution that everyone knows without having to down-level to iOS 9.2?

  Downgrading iOS is not supported.

  If you go to settings > Bluetooth, tap the "i" next to the Garmin device and tap "Forget this device" and then re-pair, it works then?

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

• Sony Visual Communication Camera VGP-VCC4 does not work at all.

  I have an internal webcam on my laptop.  I reinstalled the driver: Sony Visual Communication Camera VGP-VCC4.  The camera does not connect.  There is a small exclamation mark next to the driver in the menu devices on my computer.  I tried updates of Windows and it did not help.

  Anyone know how do I get the webcam to work again?

  Do a right click on the driver 'line' in the Device Manager, choose to update the driver manually and that it points to the driver package that you downloaded from the Sony website.

• Since the update "-Audio and Microsoft, Communication device, Streaming Media Broadcast" webcam does not work? ___Installation status: Successful___Update type: Recommended___Microsoft Audio, device communication, Media Streaming and Broadcast__

  Microsoft LIFECAM-VX 5500 Help! Since the update "-Audio and Microsoft, Communication device, Streaming Media Broadcast - Microsoft LifeCam VX-5500" it has not worked. The program does not open and when I try it says "stopped working". Also, when in MSN Messenger it freezes it and nobody can see me nor can I see myself. What can I do to fix this? I know it's the update because it worked perfectly before, and I read of others having this problem. Help!

  Hi john.w.11,

  I suggest you to install the latest driver for VX-500 that could help you solve the issue.

  Click on the link below for more information.
  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• USB does not recognize the Garmin unit. Error "unknown device".

  Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:

  1. Reset (after all what I try)
  2. Turn off the computer and leave it unplugged overnight
  3. Completely uninstall all the drivers and the software associated with the kid.
  4. manual installation of drivers
  5. uninstall the unknown device and search for new hardware
  6. uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
  7. Go back to a restore point before updating the last windows

  Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.

  Thank you
  L

  Hello

  Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.

  See this article to fix the error code 10:

  http://support.Microsoft.com/kb/943104/

  You can also post this question to the garmin forums to get help.

  https://forums.Garmin.com/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• scanner does not work because no request for communications

  HP PSC 2410 Photosmart all-in-one.  MAC OS x 10.6.8 I just install this operating system upgraded and now my scanner does not work.  The printer works fine.  But when I try to scan, I get ' HP communications application does not. "  Click on restore. "Several times and nothing happens.  I can't find a call for papers anywhere on my computer.  Downloaded again software of hp, but this is not good.  Through the permissions of the drive and all other proposed on the hp website, but not luck.  Help!  Mary Hayes

  We will restore the system again:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.