GeForce GTX 760 freezes in HP welcome screen!

Similar Questions

• PNY GTX 780 freezes in HP welcome screen!

  I have a HP H9-1060sc

  And my problem is I like to define a new map Grafik a PNY GTX 780 map

  I disassembled all Nvidia GTX 580 Drivers to remove programs

  Close the bottom of the PC

  Located in the new 780 GTX

  Start the PC and they are always on the start screen (blue screen HP) after 30 sec 1 BIB

  And nothing happens after.

  If I try to load mode safe same problem is I put the old card in the trunk of PC like a charm...

  I need help here :-)

  Makeway salvation,

  I see that you are having some problems, install the new graphics card. I did some research and discovered that the new graphics card requires a slot PCI Express 3.0, but the motherboard of your computer has only slots PCI Express 1.0. I've included the specifications for both below. It shows under the expansion for the motherboard slot, PCI Express x 16 and PCI Express x 1 which means that it is only 1.0. Unfortunately, this card is not compatible with your computer.

  GeForce GTX 780

  Care of HPE h9-1060sc motherboard

  Thank you

• Satellite Pro U300 (PSU31E) - freezes on the Welcome screen

  Hi all

  I have a Toshiba Satellite Pro U300 model no notebook 01900REN PSU31E purchased as new and connected to Windows XP.

  It worked perfectly fine for about a year until very recently when it started freezing on blue welcome screen. I had to disconnect the battery because it has not proceeded past the blue welcome screen. I ran the antivirus avast but it nothing of the detected note. Now even when I disconnect and reconnect the battery the screen does not go beyond the Welcome screen blue even if the mouse is moved again, and occasionally the pointer arrow-pointer to sand-clock pointer initially and then rest as arrow-pointer changes. Pressing buttons, Ctrl + Alt + Delete, using the mouse or the battery are not any good.

  I backed up things but not until recently. Please help me, I'm an amateur like these sorts of things, I'm English teacher from teaching professional so I really need materials and capabilities of the laptop. What should I do, please help!

  Thanking you in advance,

  Hey the view,.

  Have you tried the same thing in safe mode? Go to the advanced boot menu by pressing F8, select Safe mode.
  Check it!

  It of really difficult to say why this is happening but if it doesn t work I think that it s time to reinstall Windows. So take the Toshiba Recovery disk and boot from it. If you follow the instructions on the screen you get factory in minutes! :)

• GeForce GTX 760 in D30

  Hi guys

  I'm using a GeForce GTX 760 a D30, but it does not fit, the black plastic is a bit too high in order to close the case

  All the solutions for this?

  Thank you

  We cut the hole into the plastic arm in this case...

• GeForce® GTX 760 30-bit color display?

  Hello! I searched a lot but couldn't find a clear answer. Is it possible to output 10-bit (10 bits per channel) of an ASUS GeForce® GTX 760 color DirectCU II?

  or do I need a Nvidia Quadro for whom?

  Thanks in advance!

  Actually Yes, Geforce cards can produce 10-bit color via HDMi and displayport. However they are supported only with applications that use DirectX for the API. Support 10-bit color Quadro via Open GL. Adobe uses Open GL, so you would need a Quadro card for 10-bit with Adobe on video cards. However, you can get a map of IO as a card Aja or Blackmagic card and get 10 bit color overview this way which is what I would say since these that a gross result of enforcement and the color space is not performed by the operating system or the video driver.

  Eric

  ADK

• Mounting 4 k RED in CS6 files, means SLI help in reading and publishing? (GeForce GTX - 760 vcard)

  I just bought a card GeForce GTX-760 and noticed great improvements for video playback on my old card.

  I want to start edition RED 4 k files and be able to read in 4 k, currently I can get smooth playback in the resolution of 1/2, but thought if I bought a 2nd card and used SLI I'd be able to get 4 k for playback on my system... would this work?

  I have done the research for this, but could not find much on the use of SLI in first CS6...

  Short of getting a rocket RED, how could achieve smooth RED 4 k playback and editing in CS6?

  Thank you all!

  AZA

  With CS6, you are limited to a SINGLE video card.

  With CC, SLI does not help. See Page Tweakers - what video card use?

  A second video card can help marginally with CC only, , but the only thing that really helps is more cores, more cache L3 and higher clock speed memory.

  See Page Tweakers - Style export

• Windows Vista freezes on the Welcome screen

  I have windows vista. When windows is booting is stuck on the Welcome screen. I'll repair & restore option and return for a few days and connects properly. After the new updates of windows at the time of commissioning it are stuck on the Welcome screen once again. How do I solve this problem

  Hey sbamel,

  Welcome to the Microsoft Answers site.
  Please restore the system to its state when he worked by doing system restore, in the same way as you did previously. You may consult:

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Once you do the system restore, you should be able to boot to the desktop.
  Now install updates one at a time to determine which update is causing this problem.

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Using Windows Update in Windows Vista
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  Once find you the update causing the startup problem, after back and let us know so that we can help you.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OptiPlex 3020 - want to install sc evga NVIDIA GeForce GTX 760

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  The EVGA GTX 760 graphics card, is not compatible with the Mini OptiPlex 3020 Tower.

  The EVGA GTX 760 4 GB 256 - Bit GDDR5 PCI Express 3.0 Support SLI SC 4 GB video card requires 500w or more power.

  The OptiPlex 3020 MT supports a power electric Dell exclusive 290w that cannot be upgraded, as there are has no detail compatible power supplies available.

  See pages 19-20 of the operating instructions here:

  http://www.Dell.com/support/manuals/us/en/19/topic/OptiPlex-3020-desktop/OPT3020MTOM-v1/en-us/GUID-9CCD6D90-C1D1-427F-9E77-D4F83F3AD2B6

  Bev.

• Computer freezes on the Welcome screen.

  The Welcome screen comes on instead of take me on my desk.  I found that I can do a ctr/alt/del and that takes me to a screen that gives me options to disconnect, change accounts, etc., and if I hit the button "Cancel" on the screen then I get on the desktop.  What is causing my computer hang up on the home screen?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home premium freezes on the Welcome screen-

  My father Dell laptop (5 years) has Vista Home premium, and today when it turned on, it froze on the screen of welcome... He tried the Ctrl/alt/del, who brought up a screen with several options, including a summer disconnect, which he did. The computer is off and 2 hours later, he turned it on, and it froze again on the Welcome screen... Any ideas? Help!

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  That way if you have a Dell recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Peut only the boot without failure; A regular boot freezes on the 'Welcome' screen and fades to black

  I use an ASUS laptop and everything was smooth until yesterday earlier.  I tried to start in class and it took a little longer (stopping at the 'Welcome' screen) but I'm starting up normal and thought nothing of him.  I'm going to the House an hour later and try to start and I can just connect to Windows 7 unless I Boot safe with networking.

  I have no idea how to fix this, I have no CD, I have no Windows CD that's at my parents (and anyway was a CD to upgrade), I spent 5 hours essentially pulling my hair out try everything last night and this morning still will not work.  I am now in safe mode.

  I would like to know all the details you guys need and how to get them and I'll probably get them to you immediately because I really need my computer today.  Thank you

  Driver card mother/Chipset should solve this problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Computer hangs on the hp screen after installing evga gtx 760

  Central Unit - HP Pavilion HPE H8-1040
  Motherboard - Pegatron IPISB-CH2
  CPU - Intel Core i7-2600CPU @3.4 ghz
  OS - Windows 7 64 bit
  GPU - EVGA Geforce GTX 760
  PSU - evga 750 b
  10G RAM - memory

  What's my GPU compatible with my motherboard?

  Hi random34,

  Did you uninstall the previous graphics driver before starting your PC with GTX card?

  This map requires an 8 pin and one 6-pin. Check your power connections.

  Try to start in safe mode. Press F8 repeatedly at start. Uninstall the incorrect drivers if applicable. Install the graphics drivers from Nvidia.

  Some recent graphics cards require the UEFI BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• 3 monitors on nvidia gtx 760

  I just bought from Future Shop a HP ENVY Pheonix 810-209 Telechareger 12 concerts memory intel i7 - 4770K

  My Question is

  I have 3 monitors to my current setup that I want to connect. Digital for all

  This office shows that it is the following graphics card

  Graphics NVIDIA GeForce GTX 760 with 1.5 GB dedicated memory

  I did a search for this card and it shows nothing.

  The sale info says you can use up to 3 monitors...

  Any information would be helpful.

  Thank you

  John

  You can use this 3D Vision Surround monitors configuration guide .

• The system stops responding at the Welcome screen

  After login, the system freezes at the Welcome screen.  Is it a hardware problem or a virus, a resolution to this?  I have Vista Business on a Dell Vostro 1000 that I bought in 2008.

  Thank you very much for your answer.  Regarding your first method, F8, I already did, but even in Safe Mode, after login it goes to the home screen and stays there.

  Do you recommend that I'm trying to do a "Startup Repair disk?

  Hello

  I see that you have already tried to enter Safe Mode.

  but Safe Mode stops at the Welcome screen too

  Use the startup repair method on that I advised you

  manufacturing and usage of a startup repair disk are your other option

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows 8 does not not to the Welcome screen and the start option advanced

  I met a very strange situation.

  1. I first put my system into hibernation and walked away for a while. Then when I tried to turn on the system, it freezes at the Welcome screen. I tried the strok key (Ctrl + Alt + Delete) but nothing happened. I noticed that the ' FN ' on my laptop works very well! I could turn on and turn off the Wifi with them. But the system has not responded to all other keys and my touch pad.

  2. I tried waiting for the system to respond for a long time. When I noticed that the little light on my laptop showing the status of the HDD stopped flashing, I thought that the system could already went wrong so I hard reboot the system.

  3 then, strange thing that happened:

  (1) first is the logo of my BIOS flashed on the screen and disappeared, which has never happened before.

  (2) then the system told me that he prepares the update. But I remember turning off the automatic update and I had not installed update before the system went wrong. Although I remembered that there is a warning to the login screen that there is some new important updates and I should install them.

  (3) the system is restarted automatically when the increase is 30%. After this reboot, the system maintains hang at as before welcome screen.

  4. I've tried several things and hard reset for many times but nothing has changed.

  (1) I tried to disable the quick start to the BIOS.

  (2) I've tried allowing CSM (disable UEFI in legacy mode)

  (3) I tried to press F9 to start and got into the advanced boot options screen. However, all there hang two! My keyboard and mouse are both inadmissible.

  (4) disconnect all connected to my laptop.

  Then I'm lost. I can't repair or restore my system. I think that my keyboard works fine because I can change the BIOS setting to use. Now, I'm at my wits end with. Can anyone suggest anything?

  Update:

  Turned history that I tried to plug my USB mouse to the laptop. It worked, and when I connect my USB keyboard that works too! But minutes after I logged on successfully to Windows, I got the WORKER_INVALID and restart the system.

  I found this post which has almost exactly the same problem with me (I use an ASUS laptop too!). So I uninstalled my driver warned of the gesture, and then the system has not crashed over.

  But my problem has not been resolved. I downloaded and installed the latest driver of ASUS and always found my touch pad and the keyboard does not. I also realize that even in a different operating system on my system (LinuxMint), my touchpad and keyboard will not work.

  To summarize:

  Now I can use an external device (USB keyboard and mouse). But the built in keyboard and touch pad does not work. The latest driver for ASUS (ASUS Smart gesture) and ASUS ATK Package driver does not work. Strange thing is that when I open the computer, can I use my keyboard and even type in the Linux grub shell. But once the system got loaded, both in Windows and LinuxMint, the keyboard and the touchpad don't work.

  Now, I suspect my BIOS went wrong, but I do not know and do not dare update the BIOS so recklessly. Any ideas?

  Hello

  Thank you for the update on the question and good to hear that your problem is solved and everything works well after the replacement of the motherboard from ASUS. This information will help other members of the community to the same question.

  Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

  Kind regards