General question: how Vista "identified" an ethernet network?

Similar Questions

• How to configure ICS in network wired (Ethernet LAN) mixed (some XP some 7 64bits)

  We have an ethernet network.  A high speed printer.  Two towers XP (wireless).  A windows7 PC.  Currently, the windows7 pc is a laptop which has wireless capability.  However, we have NOT a wireless router. So don't give me responses bulletins on wireless connectivity.

  We use Internet connection sharing.  Somehow it just stopped working.  Do not know whether to blame a windows update or what.  We have probably messed up the worst configuration still try to get it working again. So I think that we must all start over and set up from ground zero.

  There is a technical bulletin, with simple (for beginners) instructions on how to configure ICS in a mixed network?  The instructions must be combined with the following configuration:

  Our host PC is XP.  We cannot change that, then give me all solutions where the pc windows7 is the host

  A customer is XP.

  A customer is windows7.

  We don't need to share files, just the printer.

  Hello

  The question you posted would be better suited in the technet Forums social. I recommend you to send your request in the below link:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Vista, broken beginning a number of questions, how can I find items that are broken

  I ran AT & T PC Maintenance tool (Performance).  One of the questions was 'broken startup objects - required Assistance.  There was a multitude of articles that have been re software, hardware, registry problems, etc.  But I'm not a teckie and articles, pages of subheadings sometimes, but nothing specific on how to identify what broken start points are being called, etc, etc, etc.  Bottom line, I'm totally lost.  All of these articles... it's too.  I want to just fix the problem.  ????  Is there a reasonably "simple solution" for us novices?  Knew not yet precisely what subheading below to select.

  Hello

  • What is the problem you are having with your Windows Vista computer?
  Example: Slow to start, the mistakes of performance issues.
  • Do you have Service pack 2 installed on your Windows Vista computer?
  • Facing errors of start when you log on Vista?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Run the troubleshooter of performance and look for automated solutions (KB959062)
   
  Optimize the performance of Microsoft Windows Vista
  
   
  http://support.Microsoft.com/kb/959062
   
  Reference: http://support.microsoft.com/kb/950685
   
  Method 2
   
  a.Optimize Windows Vista for better performance
  
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
  If you still face any questions, please refer to,.
   
  b.Get Windows Vista performance
  
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
   
  Method 3
   
  Difficulty of broken desktop shortcuts and common system maintenance tasks
   
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
   
   
  I hope this helps.

• Question: How can I format a PC running pre-installed windows Vista?

  I would like to format my PC because of the problems I've been as blue screen errors.

  I bought a PC pre-installed Windows Vista and I don't have the DVD of windows.
  Question: How can I format the hard drive?

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to identify the Protocol of network storage using PowerCli

  Hi all

  Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

  Thank you.

  See you soon

  With the Get-EsxCli cmdlet, you get to many of the features esxcli.

  Something like that

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
  

  You can use Select-Object to choose the specific properties of the returned objects.

  For example

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport
  

• How to add the computer to the ethernet network

  For some unknown reason, a MacBook Pro than on the ethernet network home. Previously I would just plug the ethernet cable and the connection is between my Mac Pro and the laptop, but not more. What are the settings must be restored?

  If no changes were made for all the work previously to check setting on the Mac, the other end. The cable could be bad or the router/modem may have been modified. I guess that all Internet services do NOT work on the laptop.

• Some General Questions of CVI - how does the compiler

  Hello

  I work with CVI 9.1 for more then a year during this time i ' v noticed a couple things, I would like to help me to understand.

  1. Work with several C files:
  • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?
  • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...
  • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?
  • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...
  • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

  2. to access the buttons

  • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

  Wow! A very broad set of issues!

  A quick response.

  • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...

  There is a basic error in your statement: the first (SetCtrlVal) parameter must be the handle Panel, which is the reference to the object in memory that is created when you call LoadPanel (). Using the name of constant sign is not correct: it may work if you're lucky and you have the Panel handle with the same value as the name of the constant, but this certainly isn't the correct way to address on a panel controls.

  Even if I don't understand the error that you declare: I expect 'the control is not of the type expected by the function' or an error of inconsistent data type (like passing an int to double check) or...

  Remember that each function that processes objects on a Panel must be aware of the handful of Panel, then either you pass to the function as a parameter, or store it in a global variable.

  • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...

  I normally leave CVI #including the necessary system files: when I use certain functions like Fmt in a source file and compile ICB warns me to add the relevant include file, and it does it correctly. Operating in this way I never had problems with formatting and the I/o library functions. You can rebuild the inclusion list by removing all #includes in yous source files and compilation of the project, this should correct errors

  • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

  You must include the file containing the definitions of the functions in all source files that use. Or you can create a general include file with all included in your project and include only this one in all of your source files

  • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

  It is a general rule that animates the CVI environment: during the execution of a loop inside a function (a reminder of command or another function) the system does not handle the user interface events, so that your buttons appear locked. This can be solved by adding a call repeated (ProcessSystemEvents) inside the loop: this way of all UI events are monitored and managed by the system.

  You must use this method with caution: before entering the loop, you must disable all the controls that can be used during operation (normally only the Quit button should stay active) otherwise, you can enter a situation in which other callbacks are executed during the loop that might interfere with it.

  In such a case, do not put a reminder in the stop button and the use of a global variable I have normally create a toggle button Stop and manipulate it in this way:

  While (1) {}

  ....

  ProcessStemsEvents ();

  GetCtrlVal (panelHandle, PANEL_STOP, &stop);)

  If {(stop)

  ... gracefully out of the function

  break;

  }

  }

  This argument has been discussed several times in the forums: do a search for ProcessSystemEvents returns a large number of discussions you can read

  • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?

  CVI is not a native boolean value. I used to use an int and test weather it is zero or not

  • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?

  I do not understand what you describe: could you add some piece of code allowing to penetrate this situation and report exactly the message the compiler warns?

• Question sleep Vista Ultimate

  Hi all

  I have a question regarding vista and my hardware not wake me up after you put the computer in standby mode. My bios is set for s3 and reminder VGA bios is enabled. I get a black screen and no function keyboard or mouse suite. Some of the forums I have watch say it is perhaps a matter of Nvidia, others say that its an OS problem. The one you suggest options that I might be able to try?

  Card mother MSI K9N2 Platinum
  Card MSI 9800 GT video
  OCZ 600w power supply
  OCZ sli memory
  AMD 7550 kuma
  3 old disks IDE PATA
  Keyboard PS2
  USB mouse

  Help, please!

  Hello Parker_Jones,

  Thank you for using the Microsoft answers Forum.

  There is a possibility that this behavior might be caused by a program not allowing the computer to wake up properly. Take a look at the article below and see if you can troubleshoot using the information contained in the article.

  A computer Windows Vista does not wake from sleep when a PassThru driver is installed

  http://support.Microsoft.com/kb/932633

  You can also use the mode without failure as a troubleshooting tool to determine the program that could be the cause of the issue. I've included the first part of the article below so that you will know how enter Mode without fail if you didn't know already. Please see the link to read the full article and complete troubleshooting.

   

  How to troubleshoot a problem by performing a boot in Windows Vista How to troubleshoot a problem by performing a boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Step 1: Perform a clean boot

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start to reduce this includes this image

  type msconfig.exe in the Start Search box and press ENTER to start the System Configuration Utility.Collapse this includes this image

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Let us know if this can help, or if you find additional information.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I find my "network security key?

  Hello world...

  I am a netbook which is preloaded with windows 7 starter. My PC is 64-bit windows vista ultimate. I have an ADSL router that is connected to the computer with a network cable (yellow) - internet works fine.

  I'm trying to connect my netbook to the wireless router, and the netbook from asking a "network security key.

  Where exactly can I find it? I can't find that whatever this is named network security key to my router settings...

  Thank you very much!!

  The wireless security key is in the settings of your router. See below for how to configure a wireless network in complete safety. It will also cover where you will find these settings.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images - http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  original title: WPA2-PSK

  tblack1970,
  Thank you for visiting the Microsoft Answers community forum.

  This should be something that your wireless adapter on your computer supports, or does not work.  It is not a feature of Vista, but the network hardware.  When your wireless adapter on your computer sees the router which has the active Protocol, it must ask the key and once offers you the key, it needs to connect.  If you do not see this option for your network card, then you should contact the manufacturer.

  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#ECC
  What are the different wireless network security methods?

  If you plan to have a wireless network, you must configure the only people that can access your choice. Here are a few options for the security of wireless networks.

  Wi - Fi Protected Access (WPA)
  WPA encrypts information and it checks to make sure that the network security key has not been modified. WPA also authenticates users to ensure that only authorized individuals can access the network.

  There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards, but it might not work with the older routers or access points. WPA2 is more secure than WPA, but it will not work with some older network cards. WPA is designed to be used with an authentication server 802.1 X, which distributes different keys to each user. This is referred to as WPA-Enterprise or WPA2-Enterprise. It can also be used in pre-shared key (PSK), where each user has the same passphrase. This is referred to as WPA-Personal or WPA2-Personal.
   
  Wired Equivalent Privacy (WEP)
  WEP is an older network security who is still able to support older devices, but it is not recommended. When you enable WEP, you configure a network security key. This key encrypts the information that one computer sends to another computer on your network. However, WEP security is relatively easy to crack.

  We do not recommend the use of WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they do not work, we recommend that you upgrade your network card to those who work with WPA or WPA2.

  Authentication of 802. 1 X
  802. 1 X authentication can help improve the security of 802.11 wireless networks and wired Ethernet networks. 802. 1 X uses an authentication server to validate users and to provide network access. On wireless 802. 1 X can work with key Wired Equivalent Privacy (WEP) or Wi - Fi Protected Access (WPA). This type of authentication is typically used when connecting to a network of workplaces.
   
  Let us know if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there an easy way to identify the type of disk required by the optical drive in my computer? How to identify DVD + compared to a DVD player?

  At home, my wife and I have two computers four desktop computers and laptops.  I often bring the laptop I got from my employer to use when I travel or work at home. Is there an easy way to identify the type of optical drive required by the optical drive in a computer?  How to identify DVD + compared to a DVD player?  I have never the disk right when I need to burn something.  Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use

  The above should help you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  General information on CD burning.

  See you soon.

  Mick Murphy - Microsoft partner

• Ethernet network Officejet Pro L7555 printer-perfect on one but feel problems with others

  My HP Officejet Pro L7555 is connected to an ethernet network.  Two computers are on the network in the same residential group.  The printer is installed on computer A (I-5 with Win 7 Pro) files downtloaded the HP support assistance.  It is shared with computer B (I-3 with Win 7 Home).  The printer works perfectly with A computer, which gives a perfect page test, but on computer B, it will print only a small portion of the top line, true for all applications I tried to print from.

  When I try to use the HP solution on computer A Center, I receive a message that the installation is not complete.

  The Scan doesn't work at all, showing no connection when used with Windows Fax & Scan, but then I could never run early on with my old Windows XP computers, and all attempts to download updates for the older systems failed.

  Print clues about how to solve the problem would be greatly appreciated.

  J_A_K

  8Lives,

  Just a note to say thanks for hanging with me and driving me to an exceptional result.  The printer work from now on, the two computers and not only as a printer, but as a fully functional all-in-one.  He has never worked this way before, mode scan fax or computer.

  I hope that my questions has not caused too much eye-rolling on your part.  Be accomplished without your knowledge, this never could clear and excellent help.  I especially appreciate timely responses, you have done throughout this process.

  Kind regards

  J_A_K

• How to improve your wireless network?

  Original title: Network wireless adapter NIC Ethernet network device

  I have internet through Comcast wireless, but the range of the signal is terrible. Is there a way to improve the range? The appliance in our living room. I lose my connection if I go into our bedroom 15 "here or the kitchen which is about the same distance.  Can I buy a kind of "booster" or whatever it is that has expanded its range of access?  Thanks for your suggestions.

  Hi Laurie,

  Check out the following link. He detailed how to improve your wireless network.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=YldZ02rk3fd

  If you have any other questions, answer here and we will be happy to help you.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• Very general question VMWare Workstation

  Hi all

  So I have a very general question of VMWare Workstation.  Here's the context: I am with a very small company and we do desktop for windows software.  My development computer running Windows7, and I have an XP Virtual Machine to the test on this platform.

  However, I would like to test the deployment and operation of my software on different versions of Windows 7, Vista, XP, etc.  However, our society cannot afford to spend $1000 on all versions of Windows, we can find.

  Are there operating system free everywhere (which is legal) images that are intended to be used by developers?  Or, you must purchase a full license for all of these operating systems, just to do a little testing?  How do you all your images of BONES?

  I know that this is a very general question (and not technology), but I would appreciate any input all have just general experience.

  Thank you!

  Dan

  MS offers subscriptions MSDN and Technet, containing all kinds of licenses for the use of test and development - according to the level.

  André