GER is not charging on the touchstone of

Similar Questions

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you

• iPad Pro will not charge for the update of iOS10

  I just finished the upgrade and now when I plug in the power cord, I get a message that says: "This accessory is not supported" and it stops to load.  What the *?  I got everything with Apple.  For the price of the iPad, you'd like to think he would hold a charge longer, and now it won't load at all.  It's only 8 months!  Given zero has no effect.

  Hello. You use the Apple charger and cable? Reported other configurations does not. See the iPad is cool the computer after an upgrade to iOS 10.

• HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

  Hello

  Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

  Key points

  * Battery charge does that when the lid is closed (sleep mode). **

  * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

  * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

  * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

  I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

  Thank you

  Maggie

  Hi there @mdeely,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  When I enter the product number, I'll get the documents to your computer.

• Satellite A75: battery not charge if the adapter has been pluged

  Hello
  I have a Satellite A75 for two years now. Lately, I have the following problem:
  1 - AC power LED indicator is green (means the adabter AC is connected correctly).
  2 - the (PC LED ON) is green (when the computer is on).
  3 - the battery charge led is off (no amber not green).
  The computer is the Dungeon running by using the battery until it completely empty and I can use it either. If there is a problem with my battery, why the computer does not use electricity to work (since it is connected to the AC) and let the battery alone.

  I can't use the AC without the battery? Please advice.

  Thank you.

  Hello

  It sounds like power supply to electronic malfunction. But I m not 100% sure about this.
  Based on your description it is not possible to charge the battery during the work on the specification s.
  You can also try to connect a new battery and check if it works. If it works then the problem was the battery. If this isn't the case, then I guess there is hardware malfunction.

  In this case, you should ask the service to help him.

• Satellite L300 - battery not charging but the power is to reach to the motherboard

  Hello

  I gave up the laptop and after that not get battery. Laptop works fine with battery only. I opened the laptop to find if it is something dislodged. But everything was fine. I checked the power comes up to the motherboard. But do not charge the battery.

  For more information, I opened only Panel keyboard and down to reach the power supply cord. I can see the top section of the motherboard page where I checked that power is reached.

  Any body can help?

  Thank you.

  Abir

  > Can any body help?

  I think that the material must be scanned for potential problems.
  I can only speculate on the defective parts
  It could be the power problem or something is broken on the motherboard, but its most of the time impossible to say what's wrong here
  So get in touch with a local Toshiba authorized service guy to check this.

• L540 Windows 10. Plugged in, not charging, then the pc stops. Cannot start.

  Brand new L540.
  Windows 10 fresh install, not improved versions of other windows.

  The Lenovo system update is installed and installed all the drivers (Intel Wireless Lan driver).

  When the charger is plugged in, the screen blinks several times, it says plugged in, no charging current. Then the laptop stops. When you try to start windows again, the laptop stops immediately after the windows 10.

  Unplug the charger and the laptop starts and works very well.
  The battery can recharge very well when the laptop is turned off.
  If the battery is 100% laptop works very well with the charger connected.

  Basically, the laptop works fine, except when you try to charge the battery then in windows 10. This causes a stop.

  I tried the solutions previously suggested to stop and remove the battery, nothing works.

  Motherboard replaced by service of Lenovo.

• Keyboard dock does not charge on the propeller

  I had the power drain from the dock, there remains 5% tablet.  When you try to load with tablet in dock, to restart, it would say error fan of keyboard dock, press F1 to continue.

  Only problem is that the dock was dead and don't react only not to the presses.  Loaded my Tablet plugged directly on the charger overnight which worked well but an hour now in charge just the dock and nothing.

  Does anyone else have this problem until the word is supported?

  Looks like I solved my problem, reset the battery with the hole of a paper clip on the back.  Took a few tries, having to go back really in there, so I was worried about it, but then the LED on the "Thinkpad" logo blinked, restarted with the tablet to dock and now work.

  Word to the wise, do not completely drain the battery of the dock

• Edge 14. Battery not charging after the Power Manager Update to 6.07 and resetting the battery.

  My battery will do not, at all.

  The gauge was obviously wrong to happen very quickly after reaching 20%, so I've updated the power to 6.07 Manager and then perform a reset of the battery (I'm sure it's in that order, perhaps first reset).

  After resetting the battery charged to 100% back, but as it is discharged, the charger was not.  With the power, the battery is located just at the same percentage and descends very slowly (about 1% in two days).

  I tried to play with the parameters of maintenance battery, the meter then said that charge will begin less than 80%, but the battery is already on the 20%.  I checked the firmware in the Manager of power and with the stand-alone program but apparently no update is necessary and T 42, 4755 FRU part number is not listed as needing an update.

  Current version of the firmware: 3f98-0004-0160-0130

  I tried uninstalling and reinstalling Power Manager.  The power windows manager also seems to have the same problem.

  I just baught the laptop last year, is a month out of warranty; I need it to be portable to work.

  I thought about buying a new battery, but it seems to be the charge function is not working, and the battery was working fine before the reset and the update, apart from the loss of certain abilities and the inaccurate meter.

  Product: 0578CTO Thinkpad Edge 14

  BIOS: 80ET61WW (2.01)

  Any help would be greatly appreciated.

  Nathan

  19% and declining

  Hi NINE.

  Thank you for hospitality, the effort and the answer.  Greatly appreciated.

  I tried this and just tried to reinstall the firmware of power management.

  I finally solved the problem after reading this post by:

  1 shut down the computer.

  2. unplug the power supply cord (and everything - usb and monitor cables).

  3 remove the battery.

  4. play with the spring on the battery switches and shake threatening (probably unnecessary, but you may want to give it 10 to 15 seconds on the laptop).

  5. replace the battery in the laptop.

  6. connect the power cord.

  7. start the laptop and connect.

  Thanks again.

  Nathan

  48% and load

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• Battery not charging if the A30 Satellite we

  I have the Toshiba Satellite A30 model, and lately, charger acted upward.
  At least, I think it is the charger.

  The problem is, the charger works fine when the laptop is turned off, the led lights to indicate that he is in charge, and when I turn on the laptop it is fully charged.
  But when the laptop is turned on, the charger does not work, so when im using it, the load is reduced slowly and I too keep turn it off to charge it back to the top.

  Its really annoying.
  Can anyone suggest what the problem and a possible solution?

  -Thank you.

  In my eyes it has nothing to do with the AC adapter, and I think that the adapter is ok.
  I think that your electronic books power is not okay maybe not a problem of motherboard or battery problem. Who knows without detail tests it's really hard to tell what's exactly wrong.

  I think that the battery needs to be checked, first using a new battery.
  If that does not solve the problem, then check the mobo should be necessary.

  Welcome them

• Iconia W4-820 will not charge with the power adapter USB Std

  Bought my W4 Iconia four weeks ago, a demonstration model, the last of them. It was packed in the box with a micro USB x adapter USB OTG cable and a power adapter. Back at home I discovered that the power adapter has been to Asus, possibly mixed in the shop. The prospective buyer of the Asus Tablet demo likely will get the Acer adapter. Adapter Asus with micro USB male connector works fine; specs are 5.2V - 1.35 amps; seems to be a STD USB adapter. The Asus adapter has a connector to USB female port to connect to a USB x microphone cable to USB adapter (with cable power adapter came in the box). Bought a 2nd power with USB 2 socket adapter to connect my W4 Iconia and my Garmin Zumo390 browser to an adapter. Specs are 5V - 3.5 amps.
  The Zumo works very well with the new card, but does not work my W4. Charge light stays off. USB ports switched to he Zumo and the Iconia W4, but same result. Zumo fresh, but W4 not. Borrowed another power adapter USB, 5V - 2 mines anti-personnel and new Zumo accusations, but the W4 still does not work. Also tried different USB adapter cables, but the same thing; Zumo invoice, W4 does not work.
  How is that possible? I can't tell the difference of 0.2 V between the Asus adapter and a USB adaptor STD would make the difference. But maybe I'm wrong. Wanted for adapters for the W4 Iconia and found several, but all the 5V as expected.
  Can anyone help.
  Will go to the shop again next week, but if I need an adapter V 5.2 I should order with Acer. 5.2 V adapters do exist not (readibly).

  Resolved issues. A dark and humid Sunday afternoon back to the store with the Tablet and all the bells and whistles. Changed the card Asus for the original Acer 5V - 2Amps (10W). Took the time to find the Acer adapter in the store. Demonstrated the adapter 2nd with 2 output USB ports and it wouldn't work with the Tablet W4. Tried another and found to be ok. 2 USB ports have a different power, a port for a smartphone and the other port is one tablet. Total power rating of the adapter is 17.5W (5V - 3.5Amps); some 2.5 and 1Amps. A happy man is back home again.