Get a black screen at startup

Similar Questions

• Only get a black screen on startup of Windows

  I have the most recent 5K 27 "iMac with a Radeon R9 M380.

  I want to install Windows 10 with an ISO and the process seemed all fine, even managed to get to the point connect you with my Microsoft account.

  But then after that I got a black screen.  Off and then restarted back in the Windows partition.  I get the small circle of loading Windows but then after that another black screen.

  I was wondering anyone knows it?

  You can start Windows safe mode? You have probably installed a wrong driver GPU.

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• Satellite L640 - black screen on startup

  When I go to start the portable computer I only get a black screen. I can hear things fan and the startup sound happens to connect but only a black screen.

  Any suggestions to solve this problem would be great!

  For better understanding, you should put a little more useful information. Who knows what you do with your machine.

  What operating system do you use? What was your last step when everything worked OK?
  Normal shutdown of OS?

• Satellite A305-S6898 - half black screen at startup

  I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

  Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
  I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

  I do not download anything on this computer other than basic messengers and photo editing programs.
  I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

  What is the problem?
  Anyone have any ideas as to what I can do.
  I can't really go back to the shop because they give only a grace period of 14 days for returns.

  > I had the same problem of a half black screen on startup.
  > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

  Doesn't look good for me it sounds a bit like graphic problem.
  Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
  I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

  If, after installing new check usability of portable and so similar issues still persists.
  If nothing will change it s is strongly recommended to communicate with an ASP.

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer problem: black screen on startup WITHOUT cursor

  Someone help me please!  Very well done on startup after loading thing I get a black screen, without a windows cursor. When I try to get into safe mode, the thing stops at: Multi (0)... Drivers/MUP.sys what should I do?

  Hello

  1. What is the number of brand and model of the computer?
  2 have you made changes on the computer before this problem?
  3. what application or anti-virus security suite is installed on your computer?

  Method 1
  I suggest to disconnect all external devices except the mouse and keyboard and check if you are able to boot to the desktop.

  Method 2
  I suggest you boot the computer last known good configuration and check if you are able to boot to the desktop.
  
  Start the computer by using the last known good configuration.

  Follow the article:

  http://support.Microsoft.com/kb/307852

  
  Method 3
  I suggest you to perform repair install or Windows and check if the problem persists.

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed
  http://support.Microsoft.com/kb/917964

  Note: When you perform the installation of repair make sure that you back up all your data.

• Computer will not start with Windows. I get a black screen and a blinking cursor.

  Windows XP Home Edition startup problem

  I have Windows XP Home Edition, but the computer does not start at the top.  I get a black screen and a blinking cursor.  I have an XP installation disc.  I was in the Recovery Console to recover all of the standard tasks, but nothing helped.

  Brand, model and model number of your PC?

  Are you able to get into the BIOS?
  What took place prior to this problem?
  For now, you can read this to get some ideas:
  http://tips4pc.com/computer-problems/my-computer-boots-up-to-a-black-screen-with-a-flashing-cursor.htm

• Get a black screen BIOS afer and before Windows logon

  So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?

  Thank you

  Don

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you do not get black screen.
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  . Did you of recent changes made to your computer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  Follow the steps in the link below.
   
  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
  
  Method 2:
   
  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly:
  http://support.Microsoft.com/kb/958233
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
   
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
   
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• When I turn on Windows Vista, I get a black screen full of f zeros.

  Original title: zero screen

  When I turn on my system (Windows Vista) I get a black screen full of f zeros.

  Hi Lyndiatxaz,

  1. you receive the error codes?

  2 are you able to boot into normal mode after getting the black screen?

  3. have you made a recent software or hardware changes to the system?

  You can check with the following and see if it helps.

  Method 1:

  If you are unable to boot in normal mode, you can start your computer in last known good configuration.

  We can refer to the following article and try to use the last known good configuration and the control.

  Using the last good known Configuration

  Method 2:

  Step 1:

  Start your computer in safe mode and check if you can start.

  Step 2:

  If you are not faced with the question in safe mode, and then perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to complete the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state.

  For more information, you can also view the article

  What to do if Windows does not start correctly

• Why do I get a black screen with a white cursor?

  I have a Gateway DX4200 with Windows Vista Home Premium 64-bit. Two weeks ago I shut down my computer up-to-date, since then, I can't download Windows. I get a black screen with a mouse cursor white that I can move but it is. I have tried several things but nothing seems to work. I tried pressing F8 and repair this way and safe mode does not work. When I press Ctrl-Alt-Del or any other key.

  Hello

  You receive an error message?

  Method 1:

  I also suggest you to follow the steps and check.

  a. Insert the Windows vista installation disc in the disc drive, and then start the computer.

  b. press a key when the message "Press any key to boot from CD or DVD".

  c. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  d. click on repair your computer.

  e. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  f. in the System Recovery Options dialog box, click System Restore.

  g. follow the instructions in the System Restore Wizard and choose the appropriate restore point.

  h. click Finish to restore the system.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

• Black screen on startup, error: 0xc00000034

  original title: 0xc00000034! 144/59712 (_0000000000000000.cdf - ms)

  my friend just moved and had his computer for 2 days. He missed a few updates and when it has updated. After the computer restarted, it crashed. at startup it gets a black screen and the message! 0xc00000034 144/59712 (_0000000000000000.cdf - ms)

  He tried the last know configs but that did not work. How can I help fix this?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion G6 black screen at startup

  So my HP pavilion G6-1c58dxG6 cannot start. When I turn it on I see loading windows files and go white bar at the bottom, then a screen of microsoft coporation then I get a black screen with no mice. If I remove the battery and run it through with just the charger it happens to a planned Windows with the mouse.  I did a few tests through the bios and it came with the memory Test: memory test managed Primary Hard Drive Disk Self Test: 1 (303) fast hard drive. Then I did F2 at startup-> HP Advanced Diagonostics start-up Test Memory Test System: SPENT intelligently check: DST short PAST: FAILURE failure ID: ID of PRODUCT RLJC6C-5S776X-MFGH4K-60U303: AA96UA #ABA Hard Disk 1. Does that mean I need new hardware?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Inspiron M5030 black screen at startup

  As the topic says, when I boot my dell Inspiron M5030, I just get a black screen, no beep and yes I have connected externally on a monitor without success. It was working fine a few days ago, I stopped and went to bed, got up the next day and it started. The power led lights up, the HARD drive light turns on and blinks so I know that something is written or read from the HARD disk, but I don't get the POST screen that says DELL or anything... Just a white screen. I would say that is the back light but the screen has a white tint to it and to my knowledge it is the backlight on the screen.

  I checked the RAM, HARD drive, etc. Check that it has been placed correctly yet.
  I removed the MOBO battery hoping to reset the CMOS to maybe get a kind of screen, but this resulted in the 'time Off system' (5 beeps) beeps but they stopped after a reboot.

  What I ended up doing was remove the heatsink from the CPU and video chip and they had as a rubber stamp on that foam.  I removed that and put thermal paste and it works fine.  Sometimes if I use it everyday the screen may start off dead zone but up to now no more beeps at startup.  If you do what I suggested before it won't hurt her, but I recommend to do what I explained in this post, after get you to the top and running.  I would like to know how it works.