Get Windows only not authentic on a Windows 7 computer.

Similar Questions

• Unable to get Windows XP computer to creat Wi - Fi for printer.

  I bought a HP Officejet 7500 a E910 printer all-in-one.  I have set up for wireless connection.  I was able to access the printer to two computers Windows 7, but when I tried to connect to a Windows XP home computer, I was not able ot creat an access to the printer port.  The wireless network is really operational.

  I tried to install it using the wizard wireless, selected local printer option, then "create a new port" found "Port Discovery from HP (HP Officejet 7500 E910) monitor on the list but he was informed that"specified port cannot be added'. '.

  Is there a way to get this computer to work with the printer?

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Group residential remote station sees only not all drives on the primary computer

  Hello

  I have a Windows 7 Homegroup work with a desktop and laptop.

  Since my laptop I can see and access the various folders and files on the main drive of my desktop computer. However, I can't see or access various other drives, I have attached to my desktop.  I do not use the notion of "libraries". I need access explicitly the drives and folders.

  SOLVED!  Readers attached to the main unit (office) (for example, h :) were not visible under homegroup in the portable navigation pane, so I guess that they could not be found when I had no access (in Word) via \\{MainMachineName}\h:\{RequiredFile}.)

  It turns out you need to omit the colon after the drive letter, while to a local drive, you need colon. Simple as that!

  Can't see how to disable "Response required" flag!

• Windows 8 Build 9200 not authentic

  I bought a Toshiba Satellite C855D - S5357 to Office Max and now 2 years later I get an error code telling me that my version of windows mode not authentic.  I bought this computer from a dealer and it came with windows 8 installed and I am unable to run an update on this PC.  Runs the windows genuine Diagnostics tool simply said as the 'Validation of the OS does not support' and I get an error code when I try to copy the page.

  Any advice would help as when I bought this computer at an authorized Microsoft Retailer, I thought that the version of windows installed was a real individual license

  To determine the current status, that is Windows, run this command at an elevated command prompt, and then paste the contents of report.txt in your answer:

  Licensingdiag.exe - %userprofile%\desktop\report.txt-log %userprofile%\desktop\repfiles.cab report

• "Peer not authenticated" with RDS by using SSL configuration

  We have a remote ColdFusion 11 server, and I'm trying to configure ColdFusion Builder 3 on a Windows 7 computer.  I have this connection RDS in HomeSite with a SIMILAR configuration, but I get a "peer not authenticated" error in ColdFusion Builder on the same computer, the connection to the same server with HomeSite with success.

  I have seen references to AdminServerComponents_WWEJ.zip and have that downloaded and installed the files in ColdFusion11, but when I run 'adminstart' I get:

  'jrun' is not recognized as internal or external, command an executable program or batch file.

  There is no "jrun.exe' on this server.  So can I assume that this folder and the procedure are not necessary for ColdFusion 11?

  I can't find all the answers anywhere on how to get this working with ColdFusion 11...

  Thanks for any help, that all the world can offer.  -bg

  After a very successful remote with Charlie session (including diagnostics and troubleshooting skills are beyond amazing), we got this sorted out.  It seems that HomeSite approve the SSL certificate on the web server, but ColdFusion Builder does not work.

  We had export the SSL certificate of the website (external) that we used as RDS host (save it in a .cer file) and import it into the certificate of ColdFusion Builder (C:\ColdFusionBuilder3\jre\lib\security\cacerts) store on my PC running ColdFusion Builder using the keytool JDK program.

  Problem solved.  I couldn't EVEN understand it on my own...

  Thank you, Charlie!

• Tecra S10 - 11 a - password: not authenticated

  Laptop has been really great working (win7 x 64), until I rebooted it a few days ago.
  I cannot get into the BIOS, can not change the BOOT sequence...

  All I see is a black with screen
  password:
  When I try to enter something - I get the message:
  Not authenticated.
  (tried - Toshiba, toshiba, all my passwords, password empty)--does not.
  I even tried to unplug the RTC battery for 30 minutes (disconnected CN9300 connector).

  Please help me, how can I cancel it?
  

  Attachment removed - unauthorized

  UPDATE:
  I sent a question to support toshiba dismissed in my town, and it's the anwser I got:

  
  Dear Sirs,

  Computers laptop Tecra are PRO series which is not possible to reset the password methods by removing the battery or similar because of the level of protection on these models.
  Remove a BIOS password is possible using challenge & response exchange with the Toshiba service only available to support partners.
  Deliver your laptop to perform because of diagnosis of the problem and make sure that you reset the password.
  It is preferable that you can attach a receipt as proof of the ownership of this laptop.
  Price $ 100 of services according to the process that we undertake.
  If the hard drive is locked by the same method password on it can not be deleted and will be not possible to access the data.

  I can't believe I have to unlock my phone and pay for it - and there is possibility that she will stay locked?

  Hardware of the laptop is OK, but it is locked...
  How can this be legal?

  I paid for the laptop (it was new and I paid a lot of money for him) - and he has the "self-destruct" mode built into it!
  How can this be?

  Can you help me please...

• After dual boot Windows 7 and Windows 8, get error 0xC004E003 and Windows are not authentic

  Hi, can someone help me with this problem?

  I bought a new laptop without an operating system installed. Then, I asked for a computer shop install Windows 7. In the properties of the computer system, he showed his & OEM Windows 7 has been activated. I could install Microsoft Security Essentials and Windows Live Essentials, which indicates that Windows is authentic. But after that I installed Windows 8 dual-boot with Windows 7, Windows 7 not genuine. Office Tournai black screen and it says: "Windows is not genuine". I tried to download Windows 7 Service Pack 1 and installed. Windows transformed in real dos, but they gave me 30 days to activate Windows 7. The computer shop didn't give me a product key. I tried to find a product key with the product key finder applications. After you enter the product key, it said: "The Software Licensing Service reported that license assessment has failed." - error 0xC004E003.
  How should I do?

  You use an Acer OEM slp key on a HP computer.that will not work.

  You will need to purchase an authentic ultimate license and change your key or return to windows, your computer comes with that.
  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates

• Try using the Vista upgrade disc supplied with the system displays error Windows version is not authentic

  original title: with Acer Aspire Vista Help
  Well, here's the story, I bought an Acer aspire T180 a few years back from Best Buy with Windows Vista installed. The only drive I received was a Vista Upgrade disc. Fast forward a few months computer slows down, etc so I thought I'd see any control and maybe cleaning the system some. Put my disk to upgrade looking for the way to do it. Make the mistake of installing the upgrade. now I have the upgrade on my computer and it always tells me that I have a version of windows that is not authentic. I tried to use my COA on upgrade drive, does not recognize and COST on the case of my Aspire, once again with the same result. I have my old version under windows.old, but can't seem to install it. I would just go back to my Vista OEM install. I have access to another computer, but it is an Apple and prefer if I didn't use this option unless it makes it easier. I guess what I'm asking, it's just to get back to my legal version on this computer, would like to keep files, but if can't, I would like to do a clean reinstall. Mine is out of warranty, so no help from Best Buy or Acer without paying their

  You are welcome.

  But try first to borrow a Microsoft Vista DVD of an acquantance of work for this restoration instead of a full recovery.

  See you soon.

• Build 7601, not authentic Windows. Can I change OEM Retail?

  Windows 7 Home premium OEM worked very well on my PC at home built for 6 months or more. Then I started getting warnings that the version is not authentic. I bought the software from a reputable supplier and I thought that you had to use OEM on a new PC. I did research as much as I can on the subject, but I am reluctant to pay again for a commercial version. Can't understand why MS would allow sales OEM versions to the public if they can only be used by certified computer manufacturers? Is there something I can do? I don't mind paying a small fee if I committed a mistake, but not the entire cost.

  License data-->
  C:\Windows\system32\slmgr.vbs(1333, 5) (null): these data are incorrect.

  
  

  Your Windows problem seems to be due to a problem with the license store...

  Re-create the license store

  1) click the Start button.

  (2) type: CMD.exe in the field "search programs and files".

  (3) right click on CMD.exe and select run as administrator

  (4) type: net stop sppsvc (it may ask you if you're sure, select Yes)

  Note: the Software Protection service may not be running, that's ok.

  (5) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform

  (6) type: Rename tokens.bar tokens.dat

  (7) type: cd %windir%\system32

  (8) type: net start sppsvc

  (9) type: slui.exe

  (10) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can occur automatically.

  Reboot, then run again MGADiag and post the report

• I bought an acer laptop travelmate 4500its running on packard bell windows vista but the key to produce on ifor machine windows xp pro, what do I do as the activation key is to say its not authentic

  Windows vista laptop, but the activation code on the bottom is for windows xp pro, what I can do

  You have an Acer laptop, Packard Bell Windows Vista computer running?

  Packard Bell OEM Windows can only be used on machines from Packard Bell.

  If the label says XP, then the machine was initially delivered with XP,

  and the one who sold you the machine will rip you off with an illegal copy of Vista.

  If you can, get your money back.

  If not, you will have either to reinstall XP, or get a legitimate copy of something more recent.

• NOT AUTHENTIC WINDOWS PROGRAM

  I recently moved fron to the United States, to the Mexico, after my computer connected to the internet now I get a message the windows xp Pro copy on my computer is not authentic to used in the field I'm located... never had a problem bofore, any ideas

  Hello

  This happens when you move from one place to another, I suggest you to reactivate your copy of Windows XP through activation of the phone. Follow the steps mentioned below.

  How to activate Windows XP by phone
  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  a. click "Start", point to "All programs", "Accessories", "System Tools" and then click "activate Windows".
  Or,
  Click on the Activation of Windows icon in the notification area (aka system Tray).
  Or,
  By clicking on the Start button, click Run, and then type in "oobe/msoobe / a", then press the Enter key on your keyboard.

  a. click Yes, I want to telephone a representative of active windows customer service now.

  b. follow the steps to activate Windows by phone dialog box and then click Next.

  c. When activation is complete and you receive the following message appears, click OK.
  "You have activated your copy of Windows.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Your copy of windows 7 version is not authentic

  while I was trying to upgrade to windows 10, my cell phone was off because of the power cut. later, when I switched on the system, the previous version of windows 7 has restored and now its posted "your copy of windows 7 version is not authentic. How can I get my system works as usual, again with windows 7?

  Hello Faye,

  I would like to know some information about the problem so that we can help you better.

  What is the complete with code error message when you say: "your copy of windows 7 version is not authentic?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to the problem of activation of Windows. I will definitely help you.

  This problem may occur because of the settings and files from corrupted Windows activation.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code
  https://support.Microsoft.com/en-us/KB/2008385

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.

  How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.

  As far as I know, the series HP PSC1510 connect only via USB.

  What happens when you connect the printer to your computer?

  You have installed the software from the CD that came with the printer?

  Are all the lights on the printer lit or flashing?  Please describe.

  You can print a test page by following the instructions on one of the following videos?

  https://youtu.be/j-DIEhmuDvs

  https://youtu.be/T2jpGhvGpmg

• How can I fix the windows 7601 build bug not authentic?

  Like many people, I seem to have contracted the problem to build 7601. My copy of Windows 7 seems to think that it is not authentic.

  How can I fix it?

  I have absolutely no reason to believe that my copy of Win7 is not genuine. He is come pre-installed on a Compaq Presario that I bought in TESCO for several years and until a month ago, never threw to the top of the screen "not true." The Unit came with the sticker on top which included the series product key.

  I have read other discussions on this topic and they all seem to contradict each other and also seem to be quite old. They mention an update uninstall then advise against it. A related to a patch from Microsoft that no longer exists.

  I found online a tutorial that showed me how to operate the SLMGR-REARM in the DOS window. It worked for the first three times that my copy flaked out but of course, then stopped.
  I then discovered a tutorial that showed me how to reset the key "reg" to allow the RESET to work again. It worked only once. Since then, I was unable to fix it. In any case, it is all to treat the symptom, not the cause.

  When I finally got the license to operate properly, I checked for Windows updates, but my Windows updater told me that there is no available update and that my Win7 was completely up to date.

  Of course, I can't check the updates now that Win7 thinks that it is not authentic.

  I recently did a hot-swap to my HD of the Compaq Presario mentioned previously in a new machine. I used the method prescribed essentially disconnect all my drivers and put Windows in some sort of fashion 'sleep' before the Exchange. I forgot what it's called but it's a feature of Windows designed to minimize problems when hot-swapping. 7601 the problem seems to start a month or two after that, and I wonder if this is the cause.

  I had a number of profiles corrupted demanding a restoration of the profile in the registry as well, but they date to before the hotswap and return at the beginning of the year. I suspect bad sectors on the disk and wonder if it is maybe the cause also.

  While 7601 is does not interfere with my day-to-day work day on the machine (other than the annoying popups to warning), I want to fix because it is just gauling, knowing that it's really a genuine copy of Windows 7.

  I will continue to trawl through the other posts to build 7601, but if there is a solution to current day, I would be grateful to hear it.

  Wayne

  Well, after reading a load of complex technical solutions, install this, delete, change, etc. Someone suggested I just go in the key product Activation and it worked. Don't know for how long but I'll scan for bad sectors on the disk hard where the information is to be corrupt.

• Not authentic Windows with an error hr = 0 x 80070002.

  OT: Windows not genuine.

  I've had this computer for about 2 years now, and all of a sudden on Wednesday, September 17, 2014 I started to get the message that my Windows 7 was not authentic.  I ran the diagnostics and here are the results.  Help, please.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F3EF42DC-28ED-459D-8D92-5B7DCCBF04F6} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395]
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514]
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514]
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385]
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514]
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385]
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385]
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385]
  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514]
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514]
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385]
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514]
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0]
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0]
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514]
  [File mismatch: C:\windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

  Other data-->
  Office details: {F3EF42DC-28ED-459D-8D92-5B7DCCBF04F6}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1489766497-2515426632-4180210797Hewlett-Packardp7 - 1380 tFRIEND7.1220120607000000.000000 + 000F1D03E07018400FE04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7601.0000-0422011
  Installation ID: 012165394865973476979570450306509996683901065510849416
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 1
  Trust time: 18/09/2014 14:31:34

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: 0x00000000
  Beyond: 0x000000000001EFF0
  Event timestamp: 9:18:2014 14:30
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: MgAAAAEAAgABAAEAAAACAAAAAwABAAEAln3mce6Zog186T7h1EbmjL1 + 7j40togUlmM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  DBGP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  LAURENCE HPQOEM SLIC-CPC

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833