Ghost car blocks disk access USB external?

Similar Questions

• 250 GB USB external hard drive is compatible with Mac OS x on an iBook G4?

  Hello

  I just bought a Toshiba 250 GB Usb external hard drive because the seller advised me telling me that it works in my iBook G4 Mac OSX computer.

  I made it and I see it on my desktop with a folder called System Volume Information and 2.32 GB available.

  I tried to copy a file and I got a message saying that the disk is not editable.

  Where can I find the instructions to initialize if it's compatible?

  Thanks in advance,

  Joan

  Post edited by: jinglada

  Post edited by: jinglada

  Hello

  I'm not sure on this subject, but maybe you have to format it.
  Are there issues listed in the Device Manager?

  Good bye

• Satellite L20-100 can be started from a USB external hard drive?

  I recently bought Toshiba Satellite L20-100 and I wonder if:
  1. is it possible to boot this machine from a disk usb external drive?
  2. it is possible to attach another internal hard drive?

  Assuming that the two answers above are 'no', how can we solve the following problem: I need hard drive space, I need to launch 3 systems of separate Wxp operating on the same machine (Toshiba Satellite L20-100).

  You are right. The answer is no. Only thing you can do is to create 3 partitions and install on each a favorite OS. Using the Boot Manager, you will be able to choose one that fits in the beginning upward.

• Toshiba 1 TB 3.5 "USB external hard drive - I erased the disc

  Could someone advise please if it can be restored?
  I just bought this drive. Never had before.

  Copied the pdf instructions before formatting the drive to NTFS, but I forgot to copy the rest.
  Would you call it say that the drivers or the operating system can be downloaded from the Toshiba site.

  Thank you

  You don't need drivers to access the external drive, its plug-and-play :)

  If no drive letter appears, check its partitions in disk management (Control Panel-> Admin Tools-> _ computer management > storage)

• Satellite Pro A200: Recovery using a ghost network boot disk

  Hi all

  Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (hardware works fine under XP/Vista)

  I tried to boot from CD, Mem Stick and USB floppy with the drivers of toshiba and realtek without success, research on google seem to point to there needing to be a driver to interface with the cardbus / PCMCIA adapter - if it IS the case can anyone shed light on the fate of a pilot and how I could continue on this?

  Thank you very much
  GAV Shakespeare.

  Thanks for the clarification best regards

• Satellite A30 series can boot from USB external HDD?

  Hello

  I have a satellite a30 series laptop. Anyone know if I can boot from usb hard drive? My bios has an option to boot from removable devices. I want to install linux but my laptop has only 30 GB of internal space and most of that is out of stock, that's why I want to install and run linux from a disk usb external hard.

  Thank you

  As far as I know that something like this is not possible. To see if anyone has any other theories. ;)

• Satellite M50: Cannot access USB stick

  someone could understand the reason why my M50 cannot read access / all external USB memory?
  But them works perfectly if I M50 boot in safe mode and also with other computers? I can advise that the problem started when I have problems - and are still not solved!
  With the upgrade of battery bluetooth in the latest version 4.00.30 (you can follow this task under the bluetooth Board, issues ' Tecra S2: no bluetooth connection possible - why?) »)

  Thank you

  Hello

  You have the same problem with all four USB ports?
  Try to remove all the USB ports in Device Manager, restart the device and try again.

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• "Computer does not allocate a drive designation letter and is not displayed when windows Explorer opens to USB external drive.

  Original title: problem connecting to USB external drive

  I tried to install a 30 GB drive to Fireball over using a disk enclosure external hard Octigen SATA-USB 2.0 on an Acer Aspire T671 under Vista Premium computer. The system recorded new material, installs drivers and registers an entry on the massive safe removal as a "USB storage device" icon However, the computer does not allocate a drive designation letter and does not show the opening of windows Explorer.

  The hard disk is configured as a master, as described in the user manual.

  How can I make the computer recognize the drive and assign a drive letter?

  Thank you for the help

  Frank Hughes

  Hi FAH300,

  If you are not able to format the drive, there may be a hardware problem.

  I suggest formatting the disk using the instructions linked by wb2001.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create Backup factory or Rescue Disk on USB media

  For my new laptop Dell Inspiron 15 with WIndows 8, I am creating a backup of the plant (~ 30 GB I would guess based on how many C:\ is used) on my 110 GB Western Digital USB external hard drive, and I am trying to create a rescue disk (~ 13 GB) on 16 GB PNY USB Flash Drive, but I can't do any task.

  In the backup of Dell and the restoration, with my 110GB USB drive connected, I clicked on the recovery media, which shows the factory backup / recovery media screen.  I put the radio to a USB Flash drive instead of disks (disks = DVD).  You press to continue.    There is a clock spinning (similar to the familiar hourglass), but it runs just forever.  Most of the time, the clock turns just forever, but 1 time I saw instead an error like "no USB key found.

  In the Dell backup and restore with my 16GB USB drive connected, I clicked on the rescue floppy, which shows the screen create a rescue disk.  Under drive contents, I checked the support of recovery, but no backup system.  Almost immediately, I see the error "no drive detected".

  Interestingly, I am able to create the rescue disk my 110 GB disk, but it is a waste of space since only 13 GB is necessary, if I want to use the 110 GB drive instead to save the factory.

  Yet, both the 110 GB of disk drive 16 GB are detected in Windows Explorer as a drive letter, and I can create a text file on them very well, so that Windows detects them.  To make sure that the drivers were updated, I clicked computer in Windows Explorer and chose to manage.  In the Device Manager. Disk drives, both drives are listed.  For each, I click right and select Update driver software. Search automatically, but the result was "best driver for your device is already installed."

  I know that I can use DVD instead of USB media, but I'd rather have all the data in 1 place (well, 2: 1 for the backup of the plant and 1 for the rescue disk); In addition, using several DVD will be a lot of time and seems more risky for me.

  Help, please!  Thank you.

  When I experienced this with a new 660 s Inspiron, I discovered I had reach the point where software began looking for the USB memory key until I inserted into the USB port.  But there is an additional condition, and it is that your memory stick should not have been inserted in the port at any time until you tried to use it to build all of the recovery.  I went through this as much as you did, first plug the USB into the computer, the implementation of the software and leaving far the beat of clock time that the software looked for the key memory.  No go.  I went back to start, started the backup software, waited for the prompt for a path to the memory stick, plugged the key and still no go.  Finally, returned at the beginning, reached the line and chose another USB port to the memory key.  Who allowed the application for relief as the computer should install the key in the new port to find the key.

  All this is very frustrating, and I sympathize completely.  Good luck to you!

• W7 UAC & local security policy blocks the access of the drive to install W7

  The UAC setting is blocking access to the W7 installation disc and reports error Code: Ux80070005; Retail "user access is denied."
  because ir requires elevated privileges to run W7.  However, I'm already under W7 with administrative privileges at level 2.
  When Windows is running.  When I stop and restart my computer after I insert the W7 disk in the CD/DVD slot, it starts
  in the W7 disk and I get three icons on graphical interface at startup.  1 HD Windows, window OS W7 and Windows EFI boot disk.  Thus,.
  while I can run W7 in OS mode and startup in W7 Installation disc & Windows 7 EFI before starting the system, I can't
  disk access to Installation of W7 after I start OS W7.  Other that this issue, Windows Diagnostic reports no problem with W7
  components or other after market seller software which would explain the problem of registry. My reading of the Forum
  Comments on the problems of the UAC and "Windows 7 Inside and Out" makes me think it's a problem of UAC setting and synchronize with
  Who is not grateful, local security policy setting of the UAC.  I don't want to mess with the registry setting without knowing why.

  Forum assistance requested.  Help, please.

  Hey Herbert,

  1. you try to reinstall Windows 7?

  2. you try to perform a custom installation or a Windows 7 upgrade installation?

  3. why you reinstall Windows 7?

  Please see the link to disable the UAC.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-in/Windows7/turn-user-account-control-on-or-off

  Please post with more information on this issue to get help.

• Response speed - USB external hard drive

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Speed on USB hard drives is relatively slow at first. You are looking at maximum read anywhere between 25 and 32MBs speed if the CPU is not do much else at the time. Supported playback mode tend to transfer bog down over time, as the fragmentation of the file. USB is convenient but firewire and eSATA are faster and faster.

• How can I force Firefox to access an external web site rather than the site corresponding to the cache on my computer?

  A web site that I regularly access using Firefox has been updated in the last 24 hours. I make Firefox to access the external site updates rather than site updates apparently stored on my memory cache?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

• Access USB on Toshiba 40L5435DG

  Hello

  I just buyed TV Toshiba 40L5435DG and ther is a problem of concern to access USB.
  When I plug a USB on TV, I can access it without problem for the container, but if I go to the TV or other connected device, I can't go back to USB.

  I have to unplug and plug the USB key again in order to access the contanining!

  Any solution for this? The firmware update can be...? Or it's normal...

  Thank you very much

  Josean

  It is really strange. With the help of option for media player, you should be able to appreciate the content saved on your USB, but of course you must tell your reader what type of files you want to see.

  What I know of my Toshiba TV:
  -Do not insert/remove the USB device during use.
  -MENU is probably not available during playback.
  -When you want to use your TV as a Media Converter, a Media Renderer on

  Can you please test again and post comments?