GIF play overview and restart after hover, do not play in bg

Similar Questions

• Computer automatically shuts down and restarts after 5 minutes run time

  Two days ago, restarted my computer, which worked very well for a few hours, (& a few years) suddenly automatically.   He then ran fine for about 4 hours when it restarts again.   He has now made that ~ 20 times, some time to restart after 5 minutes.   It also does if I connect on behalf of my wife, or if I boot in safe mode and log on as an administrator.   As much as I know I have no virus problem, but I can't be sure that it didn't stay on long enuf to run my antivirus program to the end.   Malwarebytes and Superantispyware both showed no problems two days ago, but now they also will not work I tried to backdate the system (System Restore) to last week, but failed, perhaps because I removed an old Norton SystemWorks program two days ago, when I got hurt, because I thought that maybe that's the problem.

  Is it a hardware problem or software?

  Now, I am trying get useful data on the device by frustrating bursts of 5 minutes.   Windows XP, service pack 3 with automatic updates.

  Thanks for any help.

  As a follow-up, I now declare that apparently the drive was packing with something irreplaceable on it grilled, so I'm ready for a new machine.

• Why close and restart after 1 hour, while I am still connected to my computer?

  My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

  Hello

  Check the Task Scheduler to see if you have anything put out there.

  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  ---------------------------------------------------------------------

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off - Control Panel - Power Options.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  accidents and displays the information about all crashes in one table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• T42 - stop and restart after the connection

  My T42, running on Windows XP, suddenly stops right after the connection and while the hotkeys on the loading screen.

  A message in white letters on a blue screen starts like this:

  "A problem has been detected and windows has been suthdown to prvent from damage to your computer.

  IRQL_NOT_LES_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. "If this screen appears again, follow these steps:

  And the product message points to check any new hardware or software installation. I have not recently installed a software or hardware, so I'm a little lost on how to proceed from here.

  No clue on what could be the problem or any recommendation, short doing a full recovery from a recent backup?

  Any help will be much appreciated. Thenks.

  = UPDATE =.

  After running a few tests using the blue Access IBM button and PC Doctor 2.0 running, memory tests have shown the following results:

  Fast memory - all sockets - failed

  Fast memory - Support 1 - spent

  Fast memory - take 2 - failed

  This seems to indicate that one of the two memory is faulty. This hypothesis is correct?

  If so, what should be the next step? My laptop is out of warranty. I should bring it to a repair shop, or could I order the replacement and install it myself easily?

  I am not versed in repairs to equipment and feel a bit discouraged to start to mess with storage media...

  Any advice, please?

  Thank you

  It is probably a faulty stick of RAM in the second location rather than the power socket. Best bet is to remove the module RAM then see how it goes.

  Second is really easy to access. It is under the laptop - there is a small door in the middle of the base set with a single screw. Remove the screws and remove the door to expose the RAM module. Pull the wire staples on the outside of the restraint SODIMM socket and the RAM module should appear and then remove. Replace the cover and try the laptop again.

  IF you must replace the T42 uses to off the shelf of a DDR SO-DIMM, PC2700 speed RAM - needs. Will take up to a 1 GB module in each socket. First is harder to do because he must remove the keyboard to get home. It is only 4 screws but can be a bit tedious for a novice.

  Edit: The instructions for IBM appropriate here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html

• After running diagnostics and restart the spooler does not print HP 7000

  I have two HP printers: Officejet 7000 wide format and Officejet Pro 8500 wireless and right now, neither one of them will be printed.  I have run all diagnostics on the 7000 and it indicates that the printer is working correctly.  My OS is Windows 7 64 bit and I got no error message nor have I installed new hardware, etc.   Currently, I have a document 'stuck' in limbo in the two printers.  I restarted the spooler which did not help the cause.  When I try to cancel all documents, it just shows 'delete... '. "and it's not fair.  In addition, I unplugged the usb for the 7000 and unplugged the printer, which did not help either.  It is interesting that both printers do this - I published recently several documents without problem.  Unfortunately, I am preparing for an upcoming class reunion in the coming days and still need to print additional documents.  Naturally, your expertise and your help is greatly appreciated and I hope there is a solution to these problems.  Thanking you in advance for a quick response.

  Perseverance pays!  After update some programs, etc... I'm now able to print!  I didn't know how to do this "resolved", so I'm posting it here.

• Screen freezes and restarts after repair

  Hey guys,.

  So I just got my HD Motorola Razr Maxx return of repair Motorola Droid. Before he went to repair, this device has been reset to chance the two stock (no new apps on Store) and custom. This device was not docked or altered in any way other than with game store applications and widgets from Google. Until the repair has taken place, the device had system version 9.18. After that I came back from repair, he returned with the version 9.20 System. I got the camera Thursday and since then the screen randomly froze a couple of times. It is quite frustrating. You guys have any suggestions on things I should try or should I send it back to Motorola for repair again?

  Thank you

  Brandon

  If it was my phone and I had a backup that I'd send it in. Could give them a chance to do things the second time around. I hope this helps.

• Windows 8 blue screen and restart after sleep

  I'm screen geeting blue of death and the computer restarts the computer wake from sleep.how to solve the problem.i updated all the drivers.installed all the updates of windows, but the problem is still there.what to do every time? OS is windoows 8

  The minidump files show a stop error DPC_WATCHDOG_VIOLATION (133) which seems to be caused by the Accelern.sys:

  BUCKET_ID: 0x133_ISR_Accelern+ 13f2

  
  

  The Accelern.sys, which is dated December 13, 2010, seems to be 'Sensor accelerometer pilot' "ST Microelectronics.

  This driver should be updated or replaced if possible.

  Try the next update:

  http://www.Dell.com/support/drivers/UK/en/ukdhs1/DriverDetails/product/XPS-L502X?driverId=KT7XG&osCode=W864&FILEID=3080904014&LanguageCode=en&CategoryID=UT

  If possible to uninstall the old driver before you install the new driver.

• Slow charge of Windows 8 Apps and restarts after a few minutes

  I would ask on the loading times on some applications of windows 8. I just bought a new Sony laptop with windows 8, I was waiting for it about a year ago.  Some applications, like mail, Skype, store, skydrive, takes a long time to load, sometimes it shows just 'points of return' or the 'great application icon"in the middle of the screen.  A few times, it took 1 minute to start.  Is this in relation to internet bandwidth?  No matter if it is just started windows or aired for some time, it's always like that.
  Another thing is that these same apps, almost every 5 to 15 minutes to restart.  A few times he just get "refreshed", sometimes it take a minute to load again.
  As you can imagine at this point, I'm not a person is fluent in English, so please excuse me.

  Hello

  Thanks for the reply.

  Did you check the screen resolution?

  If your PC does not respond well or do things as fast as you think it should, you can try some of the tools provided with Windows to improve performance.

  Try the steps from the following link and check:

  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  It will be useful.

• Does not update, said prev version needs to update and restart. It of not, get the same error

  Old version of Firefox running. Tried to update and get the message that a previous version has not finished installing and computer needs to reboot to finish. I restart, then try to install the new version, but just get the same error. I also tried to uninstall and start again, but got the same exact message he needed to finish the update before it could be installed.
  Suggestions?
  Thank you!

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Phone keeps restarting after the last update

  After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
  HELP ME GUYS!

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• after update to adobe flash and restart firefox for mac, as requested, cannot restore the previous session

  using macbook pro with os 10.7.5, was recommended to update adobe flash in firefox (22.0). did, which required closing and restarting firefox during the flash update. When you're done, firefox will automatically open to the adobe flash window and restore previous session was grayed out. can not know how to find and restore the tabs that I had used. responses and related issues is not a solution. my settings are all normal and do not seem to report any with the problem. on the contrary, it seems to be the closing and reopening of firefox associated with the flash update that nuked all memory of my last session. is there a solution?

  I found my own solution to my problem! first of all, don't QUIT FIREFOX - to ensure this unwanted session does not become "last session". Instead, open a new window (command-N). in my case, he opened my usual default URL and, while in this window (whether before or after the closing of the first window browser that opened automatically after the update of adobe flash), the option 'restore previous session' in the menu historical reappeared! clicked on it and, therefore, the things everything worked normally.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• After I create groups of tabs, and then either close the tabs or close and restart FF, tab groups disappeared. How to make tab groups exist for several sessions?

  How a tab groups exist after a close and restart FF? or why the content of a group of tabs disappear if the tab is closed?

  See how to use tab groups to organize a large number of tabs