Green lines on the canvas?

Similar Questions

• Dreamweaver - green line on the side of the MP4 videos, part 2

  The original discussion: Re: Dreamweaver - green line on the side of MP4 videos

  OK now I get disturbed (not the fault of you guys of course).

  I discovered that the green line is NOT on my videos, but is caused by the insertion of the video (via Insert-HTML-HTML5 video).

  Another method of insertion, the original route, I used in the old (Insert HTML plugin) version works better - does not cause the green line, but the line grey on the background remains.

  I don't want ALL the lines on the edges of my videos. (I like black open space, that I had, it's much more aesthetic and gives a full page less busy look).

  As you can see on other videos (approx) on the menu, what happened to the previous version of DW (defective if it was with El Capitan - it crashed or took a force - quit almost whenever I used it).   http://www.communicomics.com/eyemenu.html

  I am trying to edit these videos, and there seems to be no way to reintegrate those who are free to line to this new version.

  (This happens when I try to re - insert the same videos in this new version.) It is certainly something in this new version, which is the cause.)

  I am also changing the text, and apparently I can also no longer edit the text using the 'direct' either - the only way I found to do it is to make a code live/split screen and revise the text in the code section.

  I also miss the opportunity to make a convenient toggle of the widths of the table (I tried to create a new page, thinking that the green line can be caused by the table created in the previous version.

  (Maybe there is a simple way to edit live view that I'm missing?)

  But I'm trying to get this stuff finalized, and this new version is screwing things upward.

  I'll take the time to learn the Muse, but today, I need a quick way to work with what I have (and of course, when I do, there is no guarantee of Muse will not have the same question 'lines').

  I just want to be able to replace the videos with revision without the lines.

  If there is no work around for this, is it possible to have the old version of DW back so I can finish it without all this hassle?

  Please advise, my countdown has...

  Thanks again,

  Joe

  To get rid of the green line, make sure that your output video width is a multiple of 16.

  Short answer. With MPEG-2 and MPEG-4 (and other codecs DCT based), compression is applied to a grid of 16 x 16 pixel macroblocks. With MPEG - 4 Part 10 (h.264), multiple of 4 and 8 also works, but 16 is more effective.

  Nancy O.

• Green line on the right side

  Hello

  When I export the media I get a green line on the right side, not always on the same sequence, it varies every time that I new export (when I change something on the sequences of integers), what would be the solution?

  

  solved the problem by cropping the image to 100% to 101% on images of 24 p

• What is the green line in the address bar and how do I get rid of him?

  Not more happy with Firefox 5 that I was with Firefox 4, but I at least 1 new problem. There is an irritating, ugly green line that appears in the address bar. What is this and how do I get rid of him?

  The sounds that you have installed the extension of the State-4-Evar (Tools > Modules > Extensions).

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

  You can change the behavior of the progress bar in the extension Options.
  
  Status-4-Evar-> Options-> progress > [] see the progression in the address bar

• The HP Omni100 5155 PC: HP omni100 5155 red and green lines on the screen

  I used a music cd in my pc one day and the next day I had thin green and red, vertical lines throughout the screen. I did a number of bugs, but the problem persists. I was wondering what I need to do or it sounds like a graphics card? Although I checked it and the message says: "the device is functioning properly."

  I tried the things:

  • updated drivers
  • scanned for viruses
  • cleaned the ram
  • memory diagnostic tool
  • update graphics card

  Sorry, for obvious reasons, I'm not here to sell you a computer.  Most of the all-in-one computer today have the specifications you are looking for, except perhaps the webcam integrated according to the model.  You can see the HP, Amazon or Tiger Direct store as examples.

  If you are looking to buy the same more or less the same model as you have now, they are abandoned or not available unless used or refurbished which I would not recommend it.

  Before doing something drastic, discover the repair costs to the one you have now.

• HP Envy 5532 Printing green lines across the page when scanning in color

  Hi, I'm Green striped wallpaper is the best way to describe it, when I scan a document color the entire page has this striped background green and the image being analyzed. The printer is around the age of 18 months.

  I tried all the diagnostic tools that are available through the printer, nothing seems to clear it.

  Any suggestions?

  Hey @thelentons,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that your e-all-in-one printer of 5532 Envy is scanning with green lines. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done remove any paper flat from the printer and turn the printer off, then on again. Finally we will try to make a copy. If the copy has lines so you have a hardware problem. If you are able to make a copy without lines so you can have a software problem.

  If you have a hardware problem

  While the printer is turned on remove the cable at the back of the printer for a minute, turn on the printer and try to make a copy.

  If the copy always has lines in it then we will make a factory reset the printer. I'll send you some pointers on how to do so shortly in a private message.

  If after the reset you still have lines in print then the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

  If you have a software problem

  I can provide you with more information, but I need to know what operating system is on your computer. If you are not sure what your operating system is you can click here to find. Please let me know what you use, and I'll be better able to help you.

  I hope this solves your problem of copy and wish you a nice day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Red/green line at the beginning and at the end of the rendered video

  Hi, I recently started to use the first and it's amazing, but every time I make a video; a green line which then became Red appears at the beginning of the video, and it is quite visible because I usually begins with a Fade In-Out effect. It is the same for the end of the video, but I do not understand why this is happening.

  Here's my info:

  Operating system Windows 10

  NVidia GeForce GT 720MGraphic map

  8 GB RAM

  Intel Core i5-3337U CPU @ 1.80 GHz

  Adobe Premiere Pro CS6

  Any third party Plugins installed

  Gameplay videos, H.264 codec.

  The only time you won't see a coloured line is when a clip freshly abandoned in the calendar that has a codec/format supported.

  What gamefootage probably didn't.

  And probably don't have material on MPE.

  In your case there always will be so a line colored over your footage.

• Dreamweaver - green line on the side of MP4 videos

  I am a Mac user, and because Quicktime movies are now obsolete, I am trying to replace them on my web pages with videos MP4.  But when I do, a junk to the right green line (and a grey one less intrusive on the background) appears when I joined an MP4.  I can not make disappear - tried to carve out a few pixels, etc...
  Here's what it looks like (both within the program and on the web): GREEN LINE

  Adobe Media Encoder can convert to MP4.

  Nancy O.

• Pink/green line on the edge of the screen when the crossfade to and from black transitions

  I've seen this posted as a known bug in first, but I have not found a decent solution for it.  Here's a screen Cap what it looks like:

  

  Note the pink verticle line on the right side of the frame. It happens when I am exporting out of the timeline in a different format - it doesn't look like this in the timeline panel. I did some tests and it seems that do that when:

  (A) it is fading to black or black - cross-dissolution of one video to another do not do

  and

  (B) the output video is 16:9 wide screen

  This does not happen when I create a HD video and it happens when it's a video SD card in aspects "D1/DV NTSC (0.9091).

  Thoughts?

  I want to highlight a number of things here:

  • From my experience, I don't have a card CUDA, so I guess I use the Mercury playback engine. However, I always get a pink line using the Adobe Media Encoder. If I just export directly from first, I don't understand.
  • All my patterns are exported to 1280 x 720 or 856 x 480, which are divisible by 4.

  Given these two points, I tend to say that the problem is with SOUL and must be resolved by Adobe. Use an opacity instead of transitions is all just silly - we used transitions in digital bouquets of editing for years, so it shouldn't cause pink pixels.

• V10.2 has 2 of the same clip hit the other with a green line in the middle. Help!

  Hello

  My flash drive was working fine then all of a sudden on any browser, I tried Google Chrome, IE, Firefox and Opera, he plays the clip but has 2 of the same clip crushed on the other (so that you try to watch a movie on a 4:3 ratio 16:9 aspect ratio) & he has a brilliant green stripe between the 2 collars to... I tried to uninstall and reinstall but it still it! It does on any website I tried to watch the clips on & it's driving crazy me!

  PLEASE HELP IF YOU CAN, I WILL BE ETERNALLY GRATEFUL!

  First thing to try: disable hardware acceleration (Flash Player settings).

  If this does not resolve the problem, provide more information, i.e. your OS & version.

• Line green upright on the LCD of the Qosmio G20

  (Sorry for my bad English)

  Hi all

  my laptop has a vertical green line on the right side of the line of screen.this is also visible in the BIOS screen. so I think it is a linked material issue.but a good thing is that it is not visible in white background.i don't know why;

  Y at - it something I can do other than replacing the screen (I have no warranty on the LAPTOP :()

  The problem occurred after installing windows 7 beta edition, it changed my resolution to 1400 * 900 and I think which can cause overheating graphics card, which can lead to my problem.

  Please help me.

  > Is there something I can do other than replacing the screen (I have no warranty on the LAPTOP)

  I would not replace the front screen that you don't know what's exactly wrong.
  I mean there might be also a problem of graphics card and no screen problem.
  In your case, I would recommend connection of the unit to the external monitor to check if the same vertical line would appear on a second monitor.

  If the same lines are visible on the two screens then it s certainly not a problem of display but GPU and in this case that the motherboard must be replaced :(

• What does green and blue line above the average of the Finder?

  Hi all!

  I have a question about something I noticed recently: a blue and green line on the Finder in the Dock icon. He has been there for a week.

  What's weird, is that it has nothing to do with my screen faulty because it disappears when I hide the Dock or use an app in full screen. I tried to restart my computer.

  It is a picture of what it looks like to...

  

  Could someone please help me find what it means and how to remove the line, please?

  Thanks in advance!

  Mac OS X 10.11.2

  Intel Core i5 at 2.7 GHz

  8 GB 1867 MHz DDR3

  Hi, C.Lehua.

  Please visit Apple support communities.

  I understand that you see the colored on the Finder icon lines.  Let's start by a NVRAM reset, and then adjust the display resolution to see if there is no change.

  How to reset the NVRAM on your Mac.

  OS X El Capitan: set the resolution of your screen

  See you soon

• Green vertical line on the laptop screen

  Hello

  Certain someone could help me please with how can I fix a vertical green line on the right side of my laptop screen.

  Thank you

  Hello

  If a separate monitor (not a laptop), it will be setting of physical geometry on it then you can move all the
  the screen to the right and enlarge if necessary. Also right click an empty area of the desktop - graphic properties.
  Search for geometry settings (PCs and laptops).

  If necessary contact your system support manufacturer and check their documents and online forums. Do
  even to the different system manufacturer monitor manufacturer if.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Strange green line appears on the bottom of the frame of sequences (NOT the ONLINE PREVIEW RAM)

  Hello!

  I've recently upgraded to AE CS5, after long use of CS3.  I came across a problem that I hope there, someone can help me with.  For one of my elements of film a green line (one pixel high) appears at the bottom of the frame.  The green line appears in the layer panel, so I'm not there with plug-ins display - only it's purest form.  When I open the file in QT on my Mac, the green line at the bottom of the image is not there.  This has not met with the CS3 version, and I'm lost for a solution.  I did some googling and found some users AVID talks about a similar problem and was related to the fields.  So I went to 'Interpret the film' and then removed the fields with 'Lower' first and the green line goes.  The problem with this work is about the film looks so poor.  This is a digital image file, and I wouldn't remove fields because there were not at first.

  I have attached a few screenshots of the images in QT and AE CS5 for you all to see the question.

  Has anyone encountered this problem?  Is this a known problem CS5?  Is it related to OS x 10.6.5?

  Any help, advice or advice is greatly appreciated!

  Thank you!

  

  

  There is nothing to fix, and it's not a bug. For MPEG of any sort, all dimensions must be multiples of 2. It is inherent to the work of compression. You can not have a high 219 px film and not have it be cropped or enlarged pixel, with all the negative sides. I assume that the file is in fact already 220px high, the only difference being that CS3 can interpret correctly flag Quicktime display area, considering that this happens not in CS5. Which could be considered to be a "bug", but because Apple does not provide a 64-bit Quicktime and Adobe had to reverse engineer things, who do you blame? Yet once, it is not really something wrong here. In fact, the same file read on another computer or in a setting different software player can expose the same question, even when working in CS3. So the only real 'fix' is to properly encode the file 218px or 220px high. And the fields do not belong in desktop images. Apart from EI the irregular line will also be visible no matter how AE only displays a field both internally. You will need to handle this correctly, even though you may not want to.

  Mylenium

• Can I put a reminder on a line on a canvas print?

  Can I put a reminder on a line on a canvas print? How can I do? A few examples?

  I want to click on the line and a sign to appear, but I don't know how this thing of a reminder for the line of code.

  My canvas:

  Test_2 = NewCtrl (panelHandle, CTRL_CANVAS, ' ', o, 0);
  Status = SetCtrlAttribute (panelHandle, Test_2, ATTR_HEIGHT, 693);
  Status = SetCtrlAttribute (panelHandle, Test_2, ATTR_WIDTH, 693);
  Status is SetCtrlAttribute (panelHandle, Test_2, ATTR_PICT_BGCOLOR, VAL_TRANSPARENT);.

  Draw line on the canvas:
  Status = SetCtrlAttribute (panelHandle, Test_2, ATTR_PEN_WIDTH, 2);
  Status is SetCtrlAttribute (panelHandle, Test_2, ATTR_PEN_COLOR, VAL_RED);.
  Status = CanvasDrawLine (panelHandle, Test_2, MakePoint (489,75), (235, 620) MakePoint);

  If you use a canvas, you can use GetRelativeMouseState to detect the position of the mouse on the canvas. Take a look at the example of the Web (\userint\canvas.prj), more precisely the ScratchPad () and DrawToCanvas () functions in which GetRelativeMouseState is used to allow the drawing freehand on canvas.

  The next step is to figure out if the mouse is on the line: the line drawn to the user's hand or is it drawn programmatically? In the second case, I guess you know the function it generates, so it is easy to check if the mouse is over the line or not.