"gss authentication provider has stopped working".

Similar Questions

• APC Smart provider has stopped working

  I am running Windows Vista and an error box has just been released - it said that APC Smart provider has stopped working.  I can not download updates, can not do a restore of the system in normal mode or Safe Mode.

  Any suggestions would be greatly appreciated.

  Hello

  I suggest you to perform a restore of the system using Windows Vista DVD.

  Try the procedure described in the following article:

  http://support.Microsoft.com/kb/940765

• My computer says my WMI provider has stopped working and my McAfee has stopped as well

  I tried to do a system restore and it will not let me... keeps my upcoming WMI provider has stopped working and my McAfee has stopped working as well... tried redownloading and nothing happens

  Hello

  You can determine exactly what causes most of the problems by following the steps below:

  1 put the computer into safe mode and see if the problem persists, see the below mentioned link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  2. If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LDAP authentication scheme has stopped working

  I have two servers, each with its own DB and APEX applications. To simplity, let's call them A and b. authentication is handled through a LDAP schema - and this regime is the same on both servers. After a few patches on A (I have yet to find out what that this application of fixes) I am no longer able to connect to one of the applications. However, using the same user/pass I can connect fine on server b (not talking dev backend for APEX, just the connection of the ordinary user in an application). Also, I changed absolutely nothing about the applications or the authentication scheme. So for now, I'm running with the idea that something happened during the patch.

  Here are the APEX vs on both servers:

  A: APEX 3.2

  B: APEX 4.0

  Looking at the authentication scheme, trying to detect the differences, the only thing I could find is that B also has a "Use SSL" option. But it is set to N, in any case. Yet once, these worked very well they were until now.

  I decided to test and run the following code on both servers:

  BEGIN
  IF APEX_LDAP.AUTHENTICATE(
      p_username =>     'user.name',
      p_password =>     'ultrasecretpassword',
      p_search_base =>  'cn=users dc=my, dc=domain, dc=com',
      p_host =>         'host.my.domain.com',
      p_port => 389) THEN
      dbms_output.put_line('authenticated');
  ELSE
      dbms_output.put_line('authentication failed');
  END IF;
  
  
  END;
  

  Not surprisingly, that said "authenticated" on B, and 'authentication failed' in a.. So, I decided to go a little further and run the following:

  -- Code by Scott Spadofore
  -- OTN: https://forums.oracle.com/forums/thread.jspa?threadID=954602
  DECLARE
    l_retval PLS_INTEGER;
    l_retval2 PLS_INTEGER;
    l_session dbms_ldap.session;
    l_ldap_host VARCHAR2(256);
    l_ldap_port VARCHAR2(256);
    l_ldap_user VARCHAR2(256);
    l_ldap_passwd VARCHAR2(256);
    l_ldap_base VARCHAR2(256);
  BEGIN
  
    l_retval := -1;
    dbms_ldap.use_exception := TRUE;
    l_ldap_host := 'host.my.domain.com';
    l_ldap_port := '389';
    l_ldap_user := 'cn=user.name,cn=users, dc=my,dc=domain,dc=com';
    l_ldap_passwd := 'ultrasecretpassword';
  
    l_session := dbms_ldap.init(l_ldap_host, l_ldap_port);
    l_retval := dbms_ldap.simple_bind_s(l_session,
    l_ldap_user,
    l_ldap_passwd);
    dbms_output.put_line('Return value: ' || l_retval);
    l_retval2 := dbms_ldap.unbind_s(l_session);
  
  EXCEPTION
    WHEN OTHERS THEN
      dbms_output.put_line(rpad('ldap session ', 25, ' ') || ': ' ||
      rawtohex(substr(l_session, 1, 8)) || '(returned from init)');
      dbms_output.put_line('error: ' || SQLERRM || ' ' || SQLCODE);
      dbms_output.put_line('user: ' || l_ldap_user);
      dbms_output.put_line('host: ' || l_ldap_host);
      dbms_output.put_line('port: ' || l_ldap_port);
  
      l_retval := dbms_ldap.unbind_s(l_session);
  END;
  

  VERY surprisingly (or unfortunately), it displays the same thing on both A and B: "return value: 0.

  Go to B and APEX LDAP test, I found that if I enable SSL, auth begins without too much. Clearly, it should be turned off to make it work. I'm picking on it because it's the only difference I could find between the two: A, being an older version does not have any what specifications on whether or not to use SSL (and I guess it's not, because I can't find anything in the docs).

  In the APEX, the DN is:

  cn=%LDAP_USER%,cn=users, dc=my,dc=domain,dc=com
  

  ... and uses no edit function, or anything like that. It's as simple as the host name, port, DN

  I am at a loss here, so any help would be appreciated! Thanks in advance!

  Finally two thoughts.

  During the ACL test - make sure this isn't a privileged account.   Users like SYS will bypass the ACL and give false positives.

  Second - the script you have above is designed for the APEX 4.1 (APEX_040100).  Make sure you adjust respectively for APEX 3.2 or 4.2.

  Also, if you want a few quick scripts to test / display the ACL settings, there are examples all over the internet.  I've added a few to the pile here: Oracle ACL configuration Scripts. W.P. Hill Tech

  Maybe they will help.

  Good luck.

  -Tim St.

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• WMI Provider Host has stopped working and was closed

  Using Vista SP2

  Only recalled recently by updates to Adobe Reader and updates Windows security up to and including April 15. About a week ago, I started getting error messages appear that State:

  "Microsoft Windows

  WMI Provider Host has stopped working and was closed.

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  When you click on 'Close' , another small window opens on the bottom tray, and when you click on it for more information it opens help and discusses 'Data Execution Prevention'. I have not changed my Data Execution Prevention settings.

  I stopped several times and the problem continues to exist. Delete the messages and that they recur usually every 10 minutes. This problem seems more common with open Facebook.

  Can anyone tell what changed to cause this start happening and I have to do to remedy this?

  Hello world

  You can determine exactly what causes most of the problems by following the steps below:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• U920T satellite screen has stopped working

  The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  Any help in this matter would be appreciated.

  > It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.

  Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
  If the warranty is valid, the laptop must be repaired for free.

  Welcome them

• Façade has stopped working properly on the Qosmio X 300/305

  Greetings and thanks for reading,

  I had my computer not a week ago and since then, I had some problems, especially with a blue screen when I hit the FN key. Research on the problem, I disabled services of Toshiba and eventually found the culprit: hwsetup.exe. Manual execution crashed my computer and it still doesn't work. However, after you install a new version of it, it seems that FN is working fine now. Hwsetup running always breaks the computer well.
  Any ideas what may cause this? The computer is new, so I don't see what I could have done to cause this situation myself.

  Now to the following problem: it seems that the façade has stopped working correctly, the touch of the keys that allow you to launch the application Dolby, the webcam application and also turn on and off the red lights on the keyboard. When I click on the touch keys, all I get is the tone of the speakers, but nothing happens. I guess I have disabled something by mistake. Any thoughts?

  I would be grateful any entry immensely, people, so please share your theories with me. It is such a thin laptop and I can sleep now, it's difficult to to cause these problems... ridiculous, Yes, but I want everything to be perfect because I spent so much money.

  Best regards
  Johan

  Hello

  > I can't install the flash card value as well as the utility driver package. It's actually the cause of the blue FN screens. I'm really lost here.
  First of all, you should check if the BIOS version you are using is the most recent.
  If this isn't the case, update the BIOS.
  Then, you must install the utility to Support Flash Cards because this utility is necessary, to get other utility Toshiba works.

  Then install the added value package because it contains the Driver TOSHIBA components common that is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  It also contains the TOSHIBA Flash Cards tool that provides Hotkey function and function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  If the BSOD will always appear that it is advisable to recover the operating system

• Toshiba Flash Cards has stopped working...!

  HI :)

  My problem is:
  When I start my laptop an error message pops up saying: "Toshiba Flash Cards has stopped working".

  What is Toshiba Flash Cards? and what I will do with this error?

  Also, is the utility of flash refers to the Fn key card in the keyboard? If it is, so the problem above will not let me use the usefulness of this key "Fn".

  Thank you: x

  Hello

  Software Toshiba Flash Cards belongs to Toshiba value added package (VAP) and it controls the functionality of the FN button too.

  If this service has stopped working so I recommend if you allow it.
  For this you must have access to the services of Vista:
  -Go to the Start Menu
  -In the white line (search) type services and press ENTER.
  -Click on continue in the UAC prompt, (if it is necessary to provide the password for administrator approval)
  -Search for Flash or PPV cards or similar
  -Right click on the service if you want to disable or enable, and click Properties. You will find an option to enable or disable this service

  Also on this page:
  http://www.Vistax64.com/tutorials/59910-services.html

  But if this will not help you then need to reinstall the VAP.

• Network of comments Airport Extreme (7.7.3) has stopped working

  Our network of comments Airport Extreme (7.7.3) has stopped working.  We moved offices and even if my MacBook Air (13-inch mid-2013, El Capitan 10.11.3) can see the two networks, the option of comments does not connect to internet at all.  I did a reset of the Airport (essentially started above) and always the option of comments does not connect.  All software are up to date.  AAACCCKKKKK!

  You probably had AirPort Extreme to the old office set up as a router to provide DHCP and NAT services for the network.

  Now, the AirPort Extreme in the new offices may have probably been implemented in Bridge Mode to work correctly with the "new" network  If this is the case, then the guest network will not work correctly when the AirPort Extreme in Bridge Mode.

  Check this option as follows:

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Click on edit in the window that appears

  Click on the network at the top of the next window tab

  

  Check the settings for the router Mode.  Is is "Off (Bridge Mode).

  If so, the guest network is unable to function properly in this environment.

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Qosmio G30 - GPU has stopped working

  Hello

  I have Toshiba Qosmio G - 30 portable series.
  Same problem as all the others. The GPU has stopped working. Tried with external monitor too, same thing.
  This is the 3rd time what happens.

  Finally 2 times had to be repaired. The guys at Toshiba just suggest a motherboard replacement, which is about $1000 USD.

  In INDIA, they have the very worst customer service, taking customers for granted.

  I'm trying to get the GPU: nVIDIA GeForce GF-Go7600-N-A2 G73M GPU BGA Chipset, replaced.

  E Bay, some sell one those given to NINE and some new.
  NEVER HEARD OF A CHIP SE RE_FURBISHED.

  Can someone help me please?
  Is this the replacement work and what is a smart refurbished?
  Which will work?
  Does anyone know any service center etc. in INDIA who can do a good job on this?

  Help, please.

  Thank you

  > E - Bay, some sell one those given to NINE and some new.
  > NEVER HEARD A CHIP SE RE_FURBISHED.

  I don't have never heard about refurbished CPU or GPU, the internet is a vast world, and you can always find strange and products
  To be honest I would not take it. For me it sounds too strange

  However, the GPU malfunction is really annoying problem. The fact is that in most cases, the motherboard must be replaced and it is always a costly affair if the guarantee is no longer valid

  You have a service center in India.
  Well, I found this database ASP from Toshiba. You will find all the FSA all over the world.

  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  In India, were more of * 50! ASP *.
  I recommend that you get in contact with some partners and ask what's possible

• HP Envy dv6 7200 CTO: has stopped working

  Hello world.

  I have a problem with a stopped working error. When I opened the call of duty 4 Multipalyer and play for 5 to 6 minutes (sometimes up to 15 min) it give stopped working error (iw3mp.exe has stopped working). I use coolpad for the laptop to control heat. and I try these solutions:

  1 turn on the stereo mix

  2. put the socket for headphones

  3. put the microphone jack

  4.mssmp3. ASI-> mssmp3.bak

  and my problem not solved. Now what can I do with this error and my laptop?

  Thank you.

  HKN

  Hello;
  
  Let me welcome you on the HP forums!
  
  Sorry, but it's just a volunteer community support forum and we have no possibility for debugging problems with third parties (i.e., no HP) applications.
  
  For help with COD4, yout best bet is to see if the game provider has a support forum and post your concerns there.  You are more likely to help in this way.

  On an overheat, here are a few troubleshooting steps you can try: HP laptops - reduce the heat inside the PC to prevent overheating. HP® customer support

  Good luck

• Satellite L300 - 2CL - built in mic has stopped working

  Hello

  When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.

  What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.

  I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.

  Is that what I can do to get the microphone working, or should I buy a headset?

  Grateful for help
  Hugo

  Hi mate

  To be honest, I would use a helmet because helmet still provides a better speak of quality.

  But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
  Please launch the webcam software and go to settings.
  Then, choose Audio tab.
  Here, you must increase the volume to maximum.

  Welcome them

• DeskJet F2430: Printing from the Internet has stopped working

  My printer worked for several years until now.  I have a Deskjet F2430 all-in-one. When I search for updates, it says that the driver, etc are up to date.  I still can not print a document on the computer, but cannot print anything on the web. A block appears generally who says that the error is unknown, but the script on the page has stopped working (not sure of the wording).

  aurielle

  You are welcome.

  Solutions come in different flavors.

  While Firefox is my own browser of choice for several reasons, I understand that everyone wants change browsers just to print a document.  The smile.  On the other hand, I find myself using Internet Explorer on occasion when Firefox is stubborn on a particular issue - sometimes just adapt to the situation.

  There should be a permanent solution for IE - can - be another Expert or someone else will chime.

  If I find something useful, I'll post.

  Good impression!

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.