GST Port Console 8710 pinout

Similar Questions

• Port console SRW248G4

  Hello

  I want to configure my SRW248G4 switch via the console port. Unfortunately, in this option, there is no console RJ45 port entry, I don't see what port cosole resemble RS232 input. I bought two cables of the standard console cisco with one end with the db9 and one RJ45.

  Now I have and idea to put one end of a cable (db9) to switch and a second end (db9) cable in my computer (input/output COM)

  I need connect two RJ45 - this isn't a problem, I know how to do this. Here's the question:

  I know how pinout in my computer look like but I can't find the port pinout console in my SRW248G4. There are a lot of images in Internet, numerous Cisco devices, but it does not work. Maybe in LINKSYS different pinout? Anyone has experience with this subject and can help me?

  cordially Wilq

  Hi Marcin, the pinout for this console port is the standard db9 pinout.

  

  -Tom
  Please mark replied messages useful

• Port Console wireless connection problems

  I have a

  AIR-AP1242AG-A-K9

  When I connect my cable of console access point in that it puts me directly

  AP1.ciscow >

  compared to the username prompt.

  I do not have the 'local connection' or 'login' as a switch or a router command no vty/con / lines if just trying to figure out how I can point line con 0 port of the access point wireless to use the local username database configured on the access point itself.

  Any ideas?

  IOS 12.3 (7) JA1

  Hi Glen,

  Try aaa authorization console in configuration mode to add the RADIUS und / or authorization Ganymede on the console port in the world!

  Best regards

  Frank

• password protect port console on pix?

  you need a password on the console port? IF so how?

  Yes, you can.

  If you have an aaa server:

  AAA-server-server protocol radius bob

  AAA-server inside the host 1.1.1.1 bob cisco

  Bob AAA authentication serial console

  If you want to make local authentication:

  LOCAL AAA authentication serial console

  Cisco password user bob

  There is a section in this link that you can use as a reference:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_tech_note09186a0080094e71.shtml

  Let us know if you have follow-up questions.

  Thank you

  Peter

• Public port Console Proxy address?

  Which port is the proxy Console must be configured for Internet access?

  As far as I know:

  From the browser to the cell: https (443)

  From cell to ESX and vCenter: 443, 902, 903

  I'm working on a complete diagram with all connections and ports for all items.

  Hany Michael

  --

  Blog: http://www.hypervizor.com

  Twitter: http://www.twitter.com/hany_michael

• Port Console of moving Service from one v-switch to another

  I have a server VMWare ESX 3.5 with 2 v-switches. I would like to move the port vswif0 to one virtual switch to another console. The reason is I plan to use iSCSI and will change the subnet that will experience the physical NIC. See the attached picture to see my current config v-switch.

  When you set up a 2nd service console interface, it usually does not affect a default gateway.  What is usually left with the 1st service console.  If you have a gateway on the 2nd, and remove the console interface 0 service, your connection will be lost.  You should be able to fix the entry door and have connectivity again.  In addition, the name of the server is identified as that's what the vi client will try to connect to the remote console.  Make sure that DNS points to the new address and update your registration to the virtual Center, if you have a.

  -KjB

• PowerConnect 5448 Port lights flash up to 10 times per second in unison

  The ports on our PowerConnect 5448 switch lights flash very quickly in unison.  We use this switch to an office network.  No servers or computers are available on the network.  We believe that this was due to a power failure which resulted in a failure with our internet connection.  We have restored power to the modem and restarted the firewall because it was out.  Then, we noticed the lights on the switch.  We have manually operated switch PC 5448 and then turned it back.  The switch always shows the same problem.  We can connect directly to a modem, so we know that we have internet.  It seems that something is wrong with the switch because of the flashing lights of port.

  In addition, the admin user and the password to connect to the switch are lost, so we cannot see what is happening.

  There is a port of the console to the back of the switch. Connect to the port console and you will have access to the CLI. Once connected to the CLI it should give an idea of what's going on.

• PowerConnect 6248 stacking using the front SFP Ports

  I am trying to stack two Dell Powerconnect 6248 switches. Currently they are chained together, but I modules fibre for the front sfp ports. Theoretically, I should be able to stack them. But when I try:

  stack 1/g45 #stack - port console (config-battery)

  Could not set the front panel stacking mode.

  Any ideas? Thank you!

  The PCT6200 requires a stack of modules installed in Bay 1 (XG1 XG2) at the rear of the switch. The stacking module uses CX4/Infiniband type stacking spacers.

  Stacking of front port / user is not supported

• AP access and console of 1131

  Hello

  I have just Setup wireless access point, but seem unable to access via the console port. When I boot it I see the startup through the console session, but seem unable to grasp all the commands, it simply ignores them

  Am I missing something obvious here?

  your

  brand

  Hi Mark,

  Boat 1131AP with an image LWAPP as 12.3. (7) JX that allows only read-only via the Console port access. This applies also to 1131, that have been converted in to autonomous LWAPP. Take a look;

  Converted to LWAPP access points provide unalterable Port Console

  After you convert an access point mode LWAPP, the port of the console gives read-only access to the unit.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_release_note09186a00804fc3b6.html#wp154721

  I hope this helps!

  Rob

  Remember messages useful rate...

• Parameters of the SG300-10 Console?

  Hi all

  I try to connect to the console of this SG300-10 using a Cisco console cable, but I get anywhere with a real connection. I use Putty with the parameters of 9600-8-n-1-None-None. I also tried with the baud rate of 19200, but no difference. I can't access the console of this switch. Is it possible that Cisco has disabled port console switch? I would like to configure the VLANS on the switch and find the extremely confusing to use graphical interface.

  Thougthts? Suggestions?

  Thank you!

  Hi blue console is not supported. You must use standard serial 9 pin

• Access to the Console of Administration Mapviewer 12 c problem

  I try to install and configure Oracle Mapviewer 12 c (v12.1.3).  The installation seemed successful, but after the installation, I am unable to access the Console of Administration Mapviewer 12 c.  The default is Admin Console URL http://[host]:[port]/mapviewer.  I can reach the URL using a browser (Firefox, Chrome, IE), but the admin home page will not appear.  The browser just "turns its wheels"as it tries to load the page. " The image below is from Firefox

  Looking at the console of the developer of the browser (press F12) while the page loads, you can see browse the page of connection repeatedly (see image below).

  

  My environment consists of the following:

  (1) server OS: Linux (RedHat Enterprise 5.11) x86_64

  (2) oracle Weblogic Server 12 c - distribution "Oracle Fusion Middleware Infrastructure"

  According to the documentation, Oracle Mapviewer 12 c requires specific dependencies that will not provide generic install Weblogic Server (i.e. , http://www.oracle.com/technetwork/middleware/weblogic/overview/index.html,).  Instead, you must use the "Oracle Fusion Middleware Infrastructure" distribution, installation of weblogic server and all the dependencies required.

  The distribution of Oracle Fusion Middleware Infrastructure has been downloaded from the Oracle ADF OTN download page or leave cloud of delivery of the Oracle software.

  -Oracle ADF OTN download page: http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html

  -JAR file fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip

  (3) oracle Fusion Middleware MapViewer Version 12 c (12.1.3)

  -downloaded from http://www.Oracle.com/technetwork/middleware/MapViewer/downloads/index.html

  -JAR file is fmw_12.1.3.0.0_mapviewer.jar

  Following the instructions in the for Oracle Mapviewer 12 c E29624-02 User Guide (http://docs.oracle.com/middleware/1213/core/JIMPV/index.html), first of all, I have installed and configured Weblogic Server 12 c, in Mapviewer 12 c followed.

  I made two attempts of different installation:

  (a) I installed Mapviewer using the Universal Installer

  (b) I have manually deployed an EAR MapViewer exploded in WebLogic Server folder

  Two attempts produced the same results.

  Specifically, after installation and configuration of Mapviewer, I could check the Mapviewer version using the URL:

  http://[host]:[port]/MapViewer/omserver?getv=t

  Immediately access this URL resulted in the expected answer text string:

  Ver12.1.3_B140430.1010

  I could also successfully access the Weblogic administration Console (http://[host]:[port]/console) and confirm the Weblogic is running, and that Mapviewer was correctly deployment up and running as well.

  However, at this point, if I try to access the Console of Administration Mapviewer 12 c via http://[host]:[port]/MapViewer , the Console launch page does not appear (as described above).

  at this point, I wonder why the Oracle demo site works (http://slc02okf.oracle.com) and me does not work.  I assumed that the demonstration site for the Oracle Mapviewer used Mapviewer 12 c.  I based this assumption on the fact of demonstration site for this Orqacle (http://slc02okf.oracle.com/mvdemo/demo/oracle_maps_demo_v2.jsp) displays a header SEO Mapviewer 12 c (see image below).

  

  However, when I questioned the version of Oracle Demo site URL (i.e. ) http://slc02okf.Oracle.com/MapViewer/omserver?getv=t ), I see that they run Mapviewer 11 g!

  Ver11_1_1_7_3_B140717

  So, long story short, deployed anyone successfully Mapviewer 12 c and if so, can you access the Console of Administration Mapviewer 12 c?

  Any contribution is greatly appreciated.

  Wayne

  Hi Wayne,

  Please check that Java is used to start the WebLogic Server. If the JDK 8, try starting with JDK 7 to see if the spin connection problem is resolved.

  Thank you.

  João

• Help, please! Issue networks nested ESX 4. No access Console of service!

  Hi, im setting up a laboratory at home to help prepare for the VCP certification and have encountered a problem. I tried to solve this problem all day and made extesive googleing nothing helps.

  Current virtual machines:

  6 x ESX 4 Update 1 (host name = 8VESXC1N1 - 3 and 8VESXC2N1 - 3)

  1 x Server 2008, Datacenter Edition (Hostname = Cedar)

  1 x Openfiler 2.3 (Hostname = Oak)

  1 x UDA 2.0 (Hostname = pine)

  My vSwitch configuration looks like this:

  

  Currently I have each of the ESX VM with a NETWORK card installed in the Port Console of Service Group. They are directed to 192.168.10.51 - 192.168.10.53 to what will be the cluster 1 and 192.168.10.61 - 192.168.10.63 for cluster 2 (all with 24 bit masks). Yet for some reason I can't connect to or ping them from either a laptop computer sitting across the physical interface (with IP in the same range) or "Cedar" VM.

  If it has no effect then my controller of domain and DNS is through 192.168.10.40 (the virtual machine of Cedar)

  IM using the E1000 type vmnic and my physical interface is an Intel PRO1000 GT, which is listed on the HCL.

  Out of order:

  

  

  

  

  

  All ideas

  See you soon

  Have you enabled on vSwitch0 promiscuous mode?

  André

  EDIT:

  http://www.vcritical.com/2009/05/VMware-ESX-4-can-even-VIRTUALIZE-itself/

• What are the default ports in the firewall of the ESX ESX Server groups

  Hi all

  Greetings to all!

  <! [endif] > <! [if gte mso 9] >

  I'm new to vmware. I have some experience in Linux. I need to work with EXES

  Firewall. Can someone help me with firewall ESX.

  Suppose for example, that if I need to block some ports or open a

  port to a particular network. (Clamping server)

  And I would like to know what groups of ports in ESX

  Server and what are the default ports

  ESX Server available groups

  While the physical switches have ports to which you can connect, virtual switches have groups of ports. The types of Group 3 port are machine virtual port group, port console and vmkernel service groups

  Méhul

  PS: If you find answers correct or useful, please consider giving points!

• Service prallele console

  For service console prallele, the kb article 1002641 saying that "having a service console on a separate vSwitch linked to a different vmnic associated with another physical switch ensure that VMware HA feeds out of virtual machines, if the Basic console network service goes down. If the primary service console network fails, it still works using the 2^nd service console.

  But how do you assign 2 VMNIC for a pair of redandant of network switches that same VLAN ID for 2 ports installation and then join them for the same group of ports Console of Service?

  What NIC teaming also possible?

  If possible, which is better for the service console prallele in a HA environment?

  Think of it as a simple loadbalancing option.

  You need to configure the portgroup level. Select the optionbox to replace the default values vSwitch.

  If configured at the level of the vSwitch you set options for all exchanges and not what you want at this stage.

  Arnim - van Lieshout

  -

• Adapter USB - C compatibility series?

  Can someone confirm compatibility USB adapters series knows well with other Macs and a 12 '' MacBook?

  I'm not (USB) universal serial bus but a cable series to 9600, 8, N, 1 network connections and ports console industrial equipment.

  I use a TRENDnet TU-S9 with my retina 15 or 13 Air via VMware Fusion and a virtual Windows machine.

  Thank you.

  FYI to the professionals or technicians with these needs.

  I brought a House MacBook and a Windows 10 VM sees the TRENDnet TU-S9 plugged the dongle USB - C or mini dock drivers loaded, and that's where that COM3 just as it is with the native USB ports on my laptop Air and 15 of the retina.

  That could make the MacBook a keeper.