Service prallele console

Similar Questions

• Service Manager Console 2012 can create tickets via email through any kind of process/workflow?

  Original title: create tickets by e-mail

  Hey guys,.

  I need to create a support metric and most of our users are used for sending emails to the support mailbox and do not connect a ticket. Service Manager Console 2012 can create tickets via email through any kind of process/workflow? I know another system that can - I did not know if the MSC can?
  I hope that makes sense.  THX,

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Launch the web services PAPI console

  I have stand-alone installation BPM.
  
  On the start page, there is a named item: services console web lanunch PAPI. It is gray.
  
  Other gray elements include webspace administrator and archive Viewer.
  
  How lanunch the?
  
  Thank you

  After starting center Admin, go to the Configuration. Applications Web BPM tab, you can select the viewer archives and Web Services of PAPI.

  When starting the BPM Web Applications, you then will be able to launch other applications.

  -Kevin

• Could create us some accounts connection service bus Web console?

  Hi all

  When we create a weblogic for OSB domain, we must provide an account (username and password) to access the service bus and weblogic Web console (example: username weblogic). And if we have three developers use this connection bus service account Web console, they can use Create/Active Session in the center of change to work. And they may encounter some conflicts when it is active a task, then could create us three account for these developers to access the bus service Web console?

  Kind regards

  Going to happen because of the cache of the browser. Try to connect with a user in a browser (let's say firefox) and with another user with a browser (IE) different or better yet, try to connect to different machines using different users. You shouldn't face this question then.

• VCenter server: tolerance on failure service console network

  Hello world!

  I have question about network service on the vCenter Server console. In my server, I have 4 free NIC and I want to lay off the witch NIC network service management console.  Is it a good choice for the team this free with other NIC with Intel Advanced Network Services ( http://www.intel.com/support/network/sb/cs-009747.htm )?

  My 2 vShpere host is configured as scenario 4 illustrated on this page:

  http://kensvirtualreality.WordPress.com/2009/03/09/when-is-it-OK-to-default-on-your-VI/

  My idea is to connect the NIC primary service on the Vcenter Server console to the single switch and the other to the other switch and then the 2 NIC teaming

  Is the right choice?

  Thank you

  You should be able to accomplish what you want by using the NIC software from the manufacturer of your NETWORK adapter in combination.

  Connect the second NETWORK card on pSwitch 2, using the NETWORK card software create a team. Assign the two network cards (same make and model, I hope) to the team. Give the SC IP network to the NIC BIA - clear move the existing IP of the network card.

  If one of the NIC in the server VC port fails and/or a pSwitch fails, your VC server should always be in place.

  Everything else seems good.

  ----

• EM Test Service Console shows down

  We have changed the port webservice HTTPS, since then EM Console Service Test is marked as inactive.
  The States of error messages that connect to the port 7799 is refused.
  
  How the operational test?
  
  support_dba

  Hi s/n,.

  Follow the navigation provided below to resolve this issue:

  The https prot is changed, you can change the URL for the Service of Console test in the page ' Edit Service: EM Console Service test ":

  -Nagivate to targets > Services
  -From the Services page, click Service of Console EM
  -Click on the Configuration of the Analysis tab
  -Click Service trials and tags
  -With the EM Test selected Service Console, click on change
  -Change the URL for step access Logout

  Now, this should work fine.

  Best regards
  Vincent

• HA and 2nd service console

  I had just a console single service in each of my clusters for too long.  I want to install a 2nd / backup service console, only to improve resilience/accuracy of HA.  HA is configured on my cluster right now, with 'VM leave it on"since I'm paranoid about false positives. It happened twice in as many years.

  Service primary or existing console is on vSwitch0 (typical of course) which NIC access network 10.25.13.0.

  Is it not better to add a console/service gateway secondary on a network other than the primary?  If so, vSwitch1 (in use by my VMs) access network 10.25.20.0 so can't I just 'Add Networking' / Service Console / use vSwitch1 and add IP/gateway, etc and do with it?  Again, I have only this want to another path for HA heartbeat and don't have (or really even need) a NETWORK card dedicated for this purpose.

  Sound good?  The warnings I share with this approach?

  Then I can set the HA to do that HA is REALLY supposed to - detect what is almost certainly a host FAILURE and restart the virtual machines on other host in the cluster.  I find this 'interesting' VMware added option 'VMs letting' turned on only for the host isolation response, because it is not more or less defeat the purpose and/or is not an admission that HA is prone to false positives that get undesirable results?  Secondary service consoles, taking other paths (physically, nic to pass) AND to other subnets would seem to be an absolute requirement for the ideal/real 'stop VM' (and restart on hosts alt) implementation of the AH.

  I think that what is meant by the tip to maintain the network label, it is similarly to name the second service even console on each host in the cluster, not name - it the same as the first service console.

  Think of the second service console to provide connectivity redundant heatbeat mainly between the hosts, not really of another interface to check the addresses of isolation after the heartbeats are lost.  Use of the second service console if it is placed on the redundant network links well & switches must ensure that when a problem is detected, it is a failure of another host and the additional verification of isolation on a single interface would be enough to determine that the local host is not the issue.

• Test Service Console EM down

  I have a new installation of EM Cloud Control. Due to the configuration of the firewall after installation, I needed to change the HTTPS to the Web service port, default 7799 to 9043.
  
  After the change of the EM Console Service Test ist marked as inactive, the error messages States that the connection to the port 7799 is refused. Of course, it is, because I changed the port as described in note (EM 12 c: how to change the HTTP and HTTPS Upload & Ports after Installation of the Console.) [REF 1381030.1]) to Metalink, however I can't find how to set up this test, so that it uses the correct port, or how to restart that goal. Obviously, the howto to Metalink is not enough...
  
  If you want to see the screenshot for the error messages:
  https://picasaweb.Google.com/LH/photo/BUbketrVX_7QYmy-mnWcQ5cWWB303H40N4sglnemewg?feat=DirectLink
  
  So how do I fix this, so that the test is shown as running, without having to install everything new?
  
  Ciao, Gerrit
  
  Published by: Gerrit Haase on 08.03.2012 17:14 THIS

  Hi Gerrit,

  You can change the URL for the Service of Console test in the page ' Edit Service: EM Console Service test ":

  -Nagivate to targets > Services
  -From the Services page, click Service of Console EM
  -Click on the Configuration of the Analysis tab
  -Click Service trials and tags
  -With the EM Test selected Service Console, click on change
  -From there, you can continue to change the URL for the step to access Logout

  Kind regards
  -Loc

• Service Console port group

  I have a test box that I started to use a VLan tagging with. Unfortunately, I forgot to place the service console port group. Is there a way to change the port group to service the console kvm CLI console?

  You can define a VLAN with command portgroup esxcfg-vswitch-p - v vlanid

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Double Console of Service, how to eliminate a duplicate Service Console?

  Hello, I have a VMWARE ESX Server 3.5 u4, I need help, I tried to create a second service on another switch console using VI Client, now I don't have I have access to the server by SSH or VI, could someone help me how to remove the duplicate service console, configuration is as follows:

  Main service console:

  vSwitch0:

  Exchanges:

  Machine virtual network 0

  Service IP Console 0 10.212.141.9

  vSwitch2:

  Exchanges:

  Network of the virtual machine 2

  Service console 2 10.212.140.15

  Thank you?  :|

  'esxcfg-vswitch - D "Console Service 2" vSwitch1' run in the console vmware will remove this 2nd service console interface.

  -KjB

  VMware vExpert

• Unable to connect to the console of the Oracle's Web services manager

  Hi guys... I'm dan...
  
  I have oracle soa 10.1.3.1.0. I have my tent to connect to Oracle Web services manager console.
  
  I tried all possible users and passwords as names
  
  United Nations: by default
  PW: EU1
  
  
  United Nations: oc4jadmin
  PW: oc4jadmin (this is the password that I gave to the administrator when installing the suite soa)
  
  United Nations: oc4jadmin
  PW: EU1
  
  
  Thanks in advance guys...

  Try

  UN: admin
  PW: oracle

• services.msc how do you know which run? Manual delayed, the disabled?

  U\Is there a document for which services run Auto, auto set delay, disable, manual?

  Hello

  The Services' management console provides a brief description of the service functions and displays the path to the executable of the service, its current status, startup type, dependencies and the account under which the service runs. It allows users to:

  • Start, stop, pause, or restart the service.
  • Specify the service settings.
  • Change the startup type which includes Automatic, Manual and disabled:
    • Automatic starts the services when connecting to the system.
    • Manuel starts a service as required or when called from an application (according to the definition, but only part of the time in practice, depending on the service).
    • Disabled completely disables the service and prevents the running it and its dependencies.
    • Automatic (Delayed) is a new type of start, introduced in Windows Vista, which starts the service some time after the system end of initialization and initial operations occupied, so that the system boots faster.
  • Change the account under which the service to connect.
  • Configure the options of recovery in case of service.
  • Export the list of services as a text file or a CSV file.

• -restart via the management console - stopped printer spooler continues to stop

  Printer Spooler which suddenly stopped, restart spooler system still does not - which started through the services management console - to which starts and stops - is unable to run? Help!

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  Try the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Document Builder for Foglight 5 service

  Nice day

  Where can I get a document "manufacturer of service' for Foglht 5.

  Help, please.

  David Manyike

  It is the URL to generate services

  http://eDOCS.quest.com/Foglight/56/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=core&file=Userguide/HelpPage_CreateService.081.01.php&single=true

  It's the video for the use of the service operations console

  http://eDOCS.quest.com/Foglight/56/Foglight_ServiceOpsConsole_Video.html

  Golan

• Do I need to RpcSs service?

  In Task Manager, I find that RpcSs (remote procedure call) is running and would like to know if I need it or not, if I don't need, how to stop this service.

  Moreover, I also find RasAuto RasMan, RemoteAccess RemoteRegistry, rpcapd, RpcLocator,... it seems too many features remotely are running, which I don't know about the question to know if I need it or not.

  I never use function of distance in win 7.

  Does anyone have any suggestions on which it is possible to stop service remotely?
  Thanks in advance for your suggestions

  Yes, you need RpcSs service.

  Quote

  This service is pretty vital. Virtually everything depends on this service is running. It is also one of the few services that you can not disable the Services MMC console, nor can you change the State of a registry patch.

  RPCSS service control manager of services for COM and DCOM servers. It performs queries of activations of objects, object exporter of resolution and distributed garbage collection for servers, COM and DCOM. If this service is stopped or disabled, programs using COM or DCOM does not work correctly. It is strongly recommended that you have the operation of the RPCSS service.

  End of quote

  Source + more info: http://www.blackviper.com/windows-services/remote-procedure-call-rpc/

  And: https://technet.microsoft.com/en-us/library/cc787851%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396

  For other questions, you can look here: http://www.blackviper.com/service-configurations/black-vipers-windows-7-service-pack-1-service-configurations/

  See you soon,.

  J