HA does not work properly.... subhasis

Hi all

I have 7 business esxi 5.0 more and a vc lic. All esx are in single cluster. Today, I noticed that, after the failure of a server esx, vm migrates not this host to another host. Average ha does not work properly. After rephrasing of what esx vms become active but put off the power of the State with the error "failover HA vSphere virtual machine failed. Can someone guide me why it happened?

Concerning

Sasmas

Admission control is enabled. He wouldn't have enough connectors on other hosts for other virtual machines to failover. Disable the admission control and recreate the scenario.

Tags: VMware

Similar Questions

  • My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

    My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

    You don't say what you mean by not working not properly, however...

    Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

  • I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

    I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

    My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

  • Satellite P200 accidents + message: graphic card driver does not work properly

    Hello

    hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

    When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

    It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

    I ran a system restore but the problem remains.

    I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

    Matt

    Hello

    Sounds like the GPU problem.
    But try the graphics card driver update.
    Use the most recent driver for your graphics card.

    In addition, clean the fans of portable computers.
    Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
    Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

    If this is not enough, then a problem of graphics chip would be possible.

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • Satellite Pro M10 - infrared does not work properly

    Hello

    I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click Troubleshoot to start the troubleshooter for this device.

    However, under Driver Details is said:
    C:\windows\system32\DRIVERS\smcirda.sys

    I extracted the zip file in my home directory of c:\downloads\infrared.
    whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

    Thanks in advance for any help.
    Chris

    Hello

    If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

  • Mat * one years (uj-840) DVD player does not work properly

    The Mat * one years (uj-840) DVD player does not work properly.
    A symptom of the problem is that the icon does not appear in 'my computer '.
    more and she does not recognize the CD.

    I went to the properties of the drive through Device Manager and saw the following message is displayed:

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click Troubleshoot to start the troubleshooter for this device. »

    Following the instruction of the troubleshooter, I tried to update my driver through
    Device Manager, but it tells me that the current driver is the more up-to-date version.
    In the properties of the drive, I found that my driver version is: 5.1.2535.0

    What is a simple problem that has a solution?
    I don't see other actions to find the root of the problem.

    Thank you

    I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
    Check it out!

  • Toshiba common modules does not work properly

    Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

    Anyone know what this means?
    I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
    Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

    I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
    Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

    Please let us know if everything works well again.

  • Keyboard does not work properly

    Hello

    I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

    When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

    Thank you very much

    Tom

    Hi Tom

    Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
    Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

    I think the keyboard needs to be replaced to check if only this part is affected

  • Satellite L670 - after Win 8 upgrade WIFI does not work properly

    Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

    The connection only works some time, usually only a few seconds before the connection is lost.
    After a few seconds or minutes the connection is restored, just soon to be lost again.

    Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

    Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

    To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

    But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
    The device was working properly under Win 7?

    I would recommend running a few Wlan test.
    For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

  • Carpet * a DVD - RAM in Sat M55-325 drive does not work properly

    The Mat * one years (uj-840) DVD player does not work properly.
    A symptom of the problem is that the icon does not appear in 'my computer '.
    more and she does not recognize the CD.

    I went to the properties of the drive through Device Manager and saw the following message is displayed:

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click Troubleshoot to start the troubleshooter for this device. »

    Following the instruction of the troubleshooter, I tried to update my driver through
    Device Manager, but it tells me that the current driver is the more up-to-date version.
    In the properties of the drive, I found that my driver version is: 5.1.2535.0
    I have RecordNow from Sonic/Roxio which is preinstalled on the computer.

    What is a simple problem that has a solution?
    I don't see other actions to find the root of the problem.

    Thank you

    Hello

    Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft

    I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.

  • Satellite C850 - internal MIC does not work properly

    my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

    You must mark the internal mic as the default device.
    This can be done in its tab → click right on internal mic to record and choose the default device

  • Satellite P25-S520 - DVD player does not work properly

    Difficulty of DVD player or buy the external drive

    My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

    I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

    An attempt to update the driver has also fails.

    I was able to copy a CD of music last night so that at least works properly.

    Does anyone know how can I fix? The important part is to be able to load my new program.

    Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

    Thanks for any help,
    Humbaba3000BC

    Satellite P25-S520
    PIONEER DVD - RW DVR-K12D
    Driver provider: Microsoft
    Driver date: 01/07/2001
    Driver version: 5.1.2535.0
    Digital signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.

    However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

    So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • the BACKSPACE key does not work properly and if I want to enter the same letter twice it takes time between them

    the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them

    Hello

    In what program?

    Don

Maybe you are looking for

  • Impossible to compile of the SMU-8101 Code

    Hello My system is an SMU-1065 chassis (I also had the same problem in the SMU-1082 chassis), SMU-8101 controller with Windows 7 installed by OR and the following instruments: DMM PXI-4071, power supply PXI-4110, DAQ SMU-6356, calendar card SMU-6674

  • next iteration during the click on

    Hello I'm doing a loop (as or) I'll be able to control so that he won't be at the next iteration until I click. I tried to use a combination with case-control and has not found a solution. I need the loop because I need move node registry/feedback. w

  • Nvidia graphics two cards in a M58P 9965-A6U

    I am trying to connect 4 monitors to a thinkcentre M58P 9965 - A6U via two discrete graphics cards. I have a geforce 9500 card PCIe and PCI card a geforce 8200. The thinkcentre running windows XP Professional. XP recognizes two graphics cards, but De

  • Label rotation done away?

    I am trying to add a label to my application on an angle (or even on the side), but when I put in the code following the label disappears: var label:Label = new Label(); label.text = "label"; label.setPosition(100,20); label.rotation = -45; label.for

  • E-business suite 12.1.3 - worklist/loan checklist installation program displays in IE vs Chrome

    HelloWe are putting loans to the demo on a vision 12.1.3 in a customer environment.  We find that the differences in the way the screens are made between IE 8 (and Firefox) compared to Google Chrome.View in IE/FirefoxChrome viewObviously the renderin