HA restarts VMs after failure

Similar Questions

• The value of VM to restart automatically after a power failure

  Hello world

  I'm under vSphere Client 4.1.0 and VMware ESXi 4.1.0. I'm having a problem to find my vSphere client where to change the VM to restart automatically after a power failure. When we have a failure someone must manually start the virtual machine. I want that it automatically starts up on its own. Where can I change this to? I looked around the client with little success...

  Thank you for your time and help

  on the ESXi host go to the tab Configuration - setting Virtual Machine power - properties (top right of the customer)

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Satellite A200 restarts continuously after Windows update

  Hey all,.

  The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
  Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
  Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
  Try to restore to a point before the blackout failed for an unknown reason (gave an error).
  Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
  The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.

  Someone has any idea how to fix the computer without having to reinstall windows? No matter what?

  Thanks in advance,
  Ofir

  Hello

  I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
  The fact is that a BSOD can be caused by hardware error, but also a serious software problem
  In my opinion, something went wrong during the update

  If you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem

  I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.

• 4/2 (B) IOM right AFTER failure

  Connection just finished our 4th chassis and it shows the following error message: "IOM 4/2 (B) right AFTER failure.

  A screenshot of what I see in the UCS Manager under chassis 4 fouls and POST results on the general tab for chassis 4 is attached.

  Any ideas on how to fix?  Or has anyone seen this before?

  Drew,

  If it is not yet the production, you can try to reset the IOM and force him to RE-POST.  UCSM, select the IOM in question and click "Reset".  It will take about 6-7mins to deal with.  Alternatively, you can remove physically IOM, wait 10 seconds and then reinsert it.  This will also force a POST kickoff again.

  If the IOM does still not MESSAGE, then collect the following output and evoke a TAC case as suggested.

  For UCSM 1.4 or later:

  1. go to the Admin tab, select the top level of the navigation tree and select 'all '.

  "2. on the right side, you should see a link to"Create and download Tech support"information."

  3. Select the local path to save the output file

  4 Select "Châssis" and enter the chassis ID #.

  5. Select "IOM" below and let 'All' selected.

  For UCSM 1.3 or earlier:

  1. SSH to virtual IP of UCSM, connect with Admin credentials.

  2 issue 'local connection '.

  3 issue "present chassis technical support details X", where X = the chassis # for this MANUAL.

  Gathering this forward and by attaching it to your TAC case when you open with a good description of the issue will accelerate the resolution.

  Kind regards

  Robert

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• 2 minute delay in the RESTART system after Windows 8 upgrade to 8.1

  After the upgrade to Windows 8.1 I now see a delay in the RESTART function.  After you select the RESTART, the system terminates normally.  The power light stays on, the screen goes into sleep mode, but the system will wait 2 minutes before restarting.  After two minutes, the system appears to start Windows normally (as it does a cold start).  The delay is a uniform period of 2 minutes.

  Update being suspended operations may be something, but it is difficult to say. I did a little research and I see events with ID in the 200 are associated stop (100 are related startup).

  This page deals with the anatomy of the judgment (and use the Performance tool to try to trace issues):

  

  Of your description and reading the information on this page, it looks like that your hangs occur during the KernelShutdown Phase.

  Installation of the Toolkit and the follow-up of decisions are certainly advanced.  Let's just dig a little deeper.  In your registry, be sure that the value is 0 (zero) for the key ClearPageFileAtShutdown registry at this location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management

  
  

  In addition, we were able to test to see if there is a slow unloading kernel mode driver seeing if the same blocking occurs when the closure of the safe mode.  If it is fast (and it's of course better be!), we can try by using the process of elimination to find the culprit.

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I'm under El Capitan on MacbookPro. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall the CS4 Master Collection after failure of the card logical and all work EXCEPT Acrobat 9 Pro. I'm under El Capitan on a Macbook Pro. The program worked with El Capitan until the logic board failure - I use it every day.  I reinstalled the entire Collection, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  I tried to uncheck the boxes, but no difference.

  How can I get an operational program again? If Acrobat Pro 9 is no longer supported, how to get a version supported by software that works on my computer?

  Thank you.

  Thanks for the explanation. I actually have to install Acrobat and it now works. I downloaded and installed Adobe Reader XI (I think, http://ardownload.adobe.com/pub/adobe/reader/mac/11.x/11.0.02/en_US/AdbeRdr11002_en_US.dmg ) and opened the program. I noticed that after I opened the new drive, my Adobe Reader 9 program began to work. After that, I tried to open Acrobat and instead of getting the error 6 message that I had before, I had an error on a question of license that would require me to uninstall and reinstall the software. Once I did these steps my Adobe Acrobat 9 Pro started working! Don't know why my program, but it is fully functional again. I hope it helps someone else, I have why I came to answer.

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I am running Yosemite. on iMac. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  What is the cause? If yes where can I get.

  I tried to uncheck the boxes, but no difference.

  Is this or an activation problem

  Thank you

  K
  

  Hi Kate,.

  Acrobat 9 is not supported on OS of Yosemite.

  You could face compatibility problems.

  Kind regards
  Rave

• Hello, as I did an upgrade from Windows 7 to Windows 10. I also upgaded to Lightroom 6.2.1. Now it always crashes when I did crop, straighten up or deleting photos. I always have to restart lightroom after that. It then sends a message to wind

  Hello, as I did an upgrade from Windows 7 to Windows 10. I also upgaded to Lightroom 6.2.1. Now it always crashes when I did crop, straighten up or deleting photos. I always have to restart lightroom after that. It then sends a message to Windows. But gave any help. I had him just ended a cht with Adobe on this matter, they gave me your forum. Can someone help me, please? Ivo

  First of all, try to disable the GPU: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html

  What type of GPU do you use?

• After failure of hard drive, I need to download Adobe Acrobat and Photoshop Element. How to do without the link send Adobe when I bought these programs? Thank you very much.

  After failure of hard drive, I need to download Adobe Acrobat and Photoshop Element.

  How to do without the link send Adobe when I bought these programs?

  Thank you very much.

  Hello

  You need to return the document to download Acrobat.

  If you could tell us the exact version you need, we could provide you the download link directly for this particular version.

  If it s DC Acrobat, you might check out the following link.

  Download Acrobat DC (DC) | Company or VIP

  If it's any prior version, please see the following.

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  To download Photoshop element, thanks for posting your query on the next page and the expert will get back to you.

  Photoshop Elements

  Concerning

  Sukrit diallo

• PSE 13 Win 8.1 will not be installed, "detects the computer restarts" even after the computer restarts

  PSE 13 Win 8.1 will not, install "detects the computer required restarting" even after restarting the computer.

  The Mac version has installed fine on my desktop.  I now want to put the PC version on my laptop.

  Problem solved.  Seems to have been a combination of HP Support Assistant, eager to check updates and Avast2015 are not satisfied with some aspects of the installation.  Ended up uninstalling Avast, installation of PSE 13 and then re - install Avast.

• cancel the deployment or suspend VMs after a period of inactivity?

  In Lab Manager 4.0, is it possible to cancel the deployment or suspend the VMs after a period of inactivity? For example, if I want to have the VMS undeploy or suspend it after a user has not used for an hour or two?

  Thank you.

  is the closest you will get to this is a lease of deployment:

  The duration of a configuration or a VM template is deployed before Lab Manager is supposed to he cancel the deployment.

  This is because Lab Manager is not on 'activity or inactivity' as far as I remember, just how long he was out on an ESX host to.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.