Hangs after connection.

Similar Questions

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller

• Windows hangs after connection.

  After the connection, Windows Vista freezes. Im am able to run in safe mode, so think this isn't a hardware problem.

  Norton did a deep scan and make sure that I do not have a virus.

  Any Suggestions?

  Hello

  If the computer works properly in safe mode, then perform a clean boot to safe mode to check if a third party program startup or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iMac hangs after connecting with the interminable spinning beachball, but works in safe mode.

  Plug

  iMac 27 "(mid-2010) running Os X El Capitan 10.11.4"

  Processor: 3.2 GHz Intel Core i3

  Memory: 16 GB at 1333 MHz DDR3

  Problem

  With a normal startup, iMac will start properly and I can successfully connect. Once connected, I immediately get a popup window stating "To open"CS5ServiceManager", you need to install the runtime Java SE 6 legacy." I have the opportunity to click on 'Détails' or 'OK', if I click on what anyone, I immediately get the spinning beachball. I'm sure that he ran the updates at night, because the next morning was when problems began to occur.

  With a sure start, I can connect properly, everything is and I can open applications, it's just very slow.

  What I have done (in no particular order)

  1 Ran first aid utility disk

  2 reinstalled OS X El Capitan

  3 reset the NVRAM

  4. the elements of disabled opening (Dropbox and Google Drive)

  4 Ran correctly in Safe Mode, but when I rebooted the problem still occurred.

  Recently I also upgraded my RAM from 8 GB to 16 GB, it has greatly improved the performance of the machine, and I don't have any problems so far.

  I'm almost to the point of wiping the device to its factory settings, because it is so frustrating me. I really don't store anything on site, everything is in the cloud, or on an external hard drive.

  Flora-flora,

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Computer hangs after connecting external monitors.

  Original title: external monitors

  I have a Qompac Presario cq56 laptop, running windows 7 home premium. I connect it to my TV via a vga to hdmi. It works fine when running on battery, but when I connect the power cord the computer starts to slow down and eventually freezes. Also when I plug the power into the screen decreases intensity. The converter has its own power supply. I was wondering anyone has the solution to the problem.

  Hello Stephen,

  Thank you for your response.

  I am happy to know that your problem got solved.

  Feel free to write us if you encounter any other problem related to Windows.

• System hangs after connecting a USB device in Satellite A110

  Hello
  I have a Satellite A110 (psab6c). Whenever I plug an ino device USB my computer it crashes and I have to put it off and then on again and remove the USB device. I looked for the drivers, but I can't find.
  I use Windows XP. Can someone help me? Thank you

  Riledogg

  I'm sure that there is a driver problem. See the manuals. It must be described how to properly use this external device.

• Satellite M60-162: the system hangs after connection of SD card

  I at all, I have a problem when I insert an SD card in my toshiba, the system freezes. I try to install the drivers downloaded from the Toshiba site but the problem remains. The operating system is windows xp pro sp2.

  Any ideas?

  Hello

  What SD card did you use? Maybe the laptop doesn't support the format of SD card? Check the manual for the supported cards.
  Also, check the Device Manager. Check if the SD card controller is installed correctly. What you can do is to also update the SD card driver.

• Virtual machine hangs after connection. Version 11 of the workstation.

  Hi, I have a strange problem where post installation of Windows XP SP2 on a computer virtual workstation 11 machine crashes. As soon as I log on the machine, it crashes. This also happens with a machine that I created (same OS). I have Microsoft EMET (https://support.microsoft.com/en-us/kb/2458544) on my machine. I changed DEP settings to opt-in application and I have also disabled EMET but machines keep crashing post login screen.

  Any idea?

  He is a hardened machine (running windows 8.1 entirely patches, 16 GB RAM, 2 GB of which is giving to the virtual machine) and a lot of people with disabilities services. VMware Workstation 11 requires some Microsoft services to work? I have no changes to settings such as EXP enabled on processor on machines that I created.

  Thanks in advance,

  Parth

  Are you facing problems reported @ regression tools VMware Workstation 11.1.2? It is a problem of regression introduced in WS 11.1.2.

• X 1 carbon 2014 windows 7 hangs after the main power connection

  Nice day

  After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.

  The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.

  Thank you!

  Pawel

  
  

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.