has no diagnostic test
I have a hp pavilion dv2742se laptop. He failed disk hard diagnostic test-07 #1 and # 2 test - 07.Is this criitcal? I was able to use the Manager of recovery and restoration, and unit works very well. I let it run for 48 hours. No hiccups. Thank you.
Robert
Yes, it's a problem. SMART errors are not all bad sectors so will not stop a BONE to load, but tough guys never get better they that are getting worse so sometime in the near future it will fail on you. I would like to replace the hard drive now, while it is still possible to clone your old drive to a new one. I'm a policy never to use a hard drive that displays all errors. My data is too valuable for that risk.
And the information you have given us already said what's the problem. Error 07 is an error rate of search which means that the hard drive takes too long to find data on the plates. It is usually a problem with the mechanics of the reading mechanism, i.e. the small arms and the servo motor. As I said, it will not only get worse and begin to corrupt your data as he does.
Tags: Notebooks
Similar Questions
-
This procedure is a diagnostic test.
The question how to delete this file EtreCheck found:
~/Library/LaunchAgents/com. [email protected]-SharedServices.Agent.plist
/System/Library/frameworks/CoreServices.framework/frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert - /Users/GeoffreyMcCabe/Library/Logs/[email protected]- SharedServices.log u l @me.com SharedServices s t
Search me has led to an older discussion-"this procedure is a diagnostic test"...
I ran the test recommended in the Terminal, but this window says there are invalid characters...
Are there any alternatives to the procedure or updates?
Thank you...
Open your library folder of the user by holding down the Option key and selecting the library from the menu go to the Finder.
Find the LaunchAgents folder and open it.
Search for the file with the same name as on the Etrecheck and delete it.
-
Satellite M40: Modem fails the diagnostic test on WinXp Pro
Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.
What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.
Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out
Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.
Thank you
OumyHello
Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.
http://EU.computers.Toshiba-Europe.com
They are a lot of drivers for countries individually.
In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.
Good bye
-
360 11 X - n012na: Diagnostic test
The customer service was asked to run the basic diagnostic test. This procedure has been stuclaimed on 17% estimated time remaining 12 minutes 13 seconds for more than two hours! It is safe to say that my laptop once again froze. I'm giving up test. Quick test has been selected.
Was it a test drive? If so, it is blocked like this, which indicates that your hard drive has failed and needs to be replaced.
If it's a different test, I don't know what to tell you.
Whatever it is, you can turn it off without damaging the PC.
Good luck
========================================================================
I'm a volunteer and I do not work for, or represent, HP.
---------------------------------------------------------------
If my post helped you, please click on the thumbs-up symbol to say thank you.
If my posts resolved your issue please click "accept as a Solution.
======================================================================== -
Monthly hardware diagnostic test
Top of A6510t HP desktop computer.
Question of hardware diagnostic tools
My monthly hardware diagnostic test ran and it showed:
in the category of instruments 'storage '.
storage-"smart auto court" has failed. It had on it. HD521-2W
She supposed to check help and support center but that was no help to me at all.
Can someone give me an idea what I'm up against? I don't know even where to start. If I was a technician, it would be probably better.
Thank you in advance.
Your questions are valid and thoughtful.
If the plan is to backup your important files, etc. on an external hard drive and nothing to do with the old PC, so you don't need a 3.5 "SATA hard drive to replace the other.
Your question: "so I guess I'm asking if record these things on the external hard drive will allow me to have these things available to put on a new computer should I have to? Yes. You will not need the OS or recovery disk\usb license information because your new PC media comes with a.
It is not a simple matter of connecting the disk external usb passport to a usb port on the new PC and using Windows Explorer to search for and copy them to your new PC.
-
I tried to put a disc that has CD - R80 disk in my computer with the files that it contains, but the drive is not recognized and I did the diagnostic test and it came up with error code 0f00:286E... Anyone know whats wrong?
-
Good evening
We have a problem where after running a concurrent program as active users, when we try to display the output file or Log, the browser appears and displays one of the following:
The file of Applications Server could not open the file /rst4025/app/common/log/l53051882.req for reading.
The file of Applications Server could not open the file /rst4025/app/common/out/CJOHNSON.53051882 for reading.
If I change the profile options for opening files in Oracle Viewer, two files open very well when you click on the button, but then if I choose the FILE - copy to and choose browser, it displays the same as above so basically when they open in a browser, they receive this error.
The files are present and good... I have e nsuredthe variable $APPLCSF of environment set correctly and that the applmgr has sufficient privileges to access the files under the path / directory. I feel like I've tried everything I found on Metalink and this forum, but the problem still persists.
I found the following and decided to try to run the program to Test Diagnostic FS:
How to troubleshoot FNDFS and FNDWRR (output display competing application issues) (Doc ID 847844.1()
I followed the instructions and came up with the following data to plug into the test:
LOGFILE_NAME: /rst4025/app/common/log/l53051882.req
LOGFILE_NODE_NAME: ADELVMTR01
OUTFILE_NAME: /rst4025/app/common/out/CJOHNSON.53051882
OUTFILE_NODE_NAME: ADELVMTR01
CONTROLLING_MANAGER: 2693527
FILENAME [internal log file competitor Manager]: /rst4025/app/common/log/rst4_0905.mgr
NODENAME: ADELVMTR01
So now using this information, I run the FULL test with:
Filename [internal log file competitor Manager]: /rst4025/app/common/log/rst4_0905.mgr
NodeName: ADELVMTR01
Request ID: 53051882
Director ID: 2693527
The trial takes place and ends with a WARNING State, and the output file looks like this:
Is RT Begin program. ===================================================
This is FSTest.java version: $Header: FSTest.java 120.3 26/09/2005 07:34:21 pferguso noship $
Local node is: adelvmtr01.xyz.gov
-Display of the versions of the important packages:
/ * $Header: AFCPFILS.pls 115,15 2005/08/19 21:42:23 rckalyan ship $ * /.
/ * $Header: AFCPFILB.pls 120.7.12010000.3 2010/03/19 11:20:54 mburra ship $ * /.
/ * $Header: AFCPWFPS.pls 115.18 2005-08-20 20:34:29 pferguso ship $ * /.
/ * $Header: AFCPWFPB.pls 115,30 19/07/2006 20:21:01 tkamiya ship $ * /.
Test +-running FULL-+.
-Run all available tests
+-Running test FILE-+.
-File recovery: /rst4025/app/common/log/rst4_0905.mgr
Node: ADELVMTR01
-File will be copied into: /rst4001/app/apprst4/inst/apps/rst4_adelvmtr01/appltmp/OF46336268.tmp on adelvmtr01.xyz.gov
-Call to FND_WEBFILE. SET_DEBUG
-Call to FND_WEBFILE. GET_URL
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=4285090718
-The values stored in FND_FILE_TEMP for this request:
--------------------------------------------
FILE_ID: 4285090718
FILE name: /rst4025/app/common/log/rst4_0905.mgr
Node_name: FNDFS_APPLTOP_adelvmtr01
Mime_type: text/plain
TRANSFER_MODE: TEXT
REQUEST_ID: 0
EXPIRES THE: 13-SEP-07 20:00:07
FILE_SIZE: 0
DESTINATION_NODE: FNDFS_adelvmtr01.xyz.gov
DESTINATION_FILE: /rst4001/app/apprst4/inst/apps/rst4_adelvmtr01/appltmp/OF46336268.tmp
TRANSFER_TYPE: W
NATIVE_CLIENT_ENCODING: null
OPINION ON: 0
PAGE_SIZE: 0
ENABLE_LOGGING: Y
--------------------------------------------
-Make connection HTTP FNDWRR.exe
Exception in running the test FILE: java.net.ConnectException: connection refused
java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
at sun.net.www.http.HttpClient.New (HttpClient.java:306)
at sun.net.www.http.HttpClient.New (HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:837)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:778)
at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:703)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream (HttpURLConnection.java:1026)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373)
at oracle.apps.fnd.cp.request.FSTest.retrieveFile(FSTest.java:506)
at oracle.apps.fnd.cp.request.FSTest.runFILEMode(FSTest.java:250)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runFULLMode(FSTest.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runProgram(FSTest.java:132)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
+-FILE test failed. --------------------------------------------------+
RFILE +-operation test-+.
-File recovery: /rst4025/app/common/log/rst4_0905.mgr
Node: ADELVMTR01
-Call to FND_WEBFILE. SET_DEBUG
-The call to RemoteFile.getFile)
-File transferred successfully.
Test +-RFILE completed successfully. ---------------------------------+
REQOUT +-operation test-+.
-Recovery of output file for the concurrent request 53051882
-The name of the file is: /rst4025/app/common/out/CJOHNSON.53051882
It is located on the node: ADELVMTR01
-Call to FND_WEBFILE. SET_DEBUG
-Call to FND_WEBFILE. GET_URL
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=1322626817
-The values stored in FND_FILE_TEMP for this request:
--------------------------------------------
FILE_ID: 1322626817
FILE name: /rst4025/app/common/out/CJOHNSON.53051882
Node_name: FNDFS_APPLTOP_adelvmtr01
Mime_type: Application / msword
TRANSFER_MODE: TEXT
REQUEST_ID: 53051882
EXPIRES THE: 13-SEP-07 20:00:07
FILE_SIZE: 0
DESTINATION_NODE: null
DESTINATION_FILE: null
TRANSFER_TYPE: null
NATIVE_CLIENT_ENCODING: null
OPINION ON: 0
PAGE_SIZE: 0
ENABLE_LOGGING: Y
--------------------------------------------
-Make connection HTTP FNDWRR.exe
Exception, run the REQOUT test: java.net.ConnectException: connection refused
java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
at sun.net.www.http.HttpClient.New (HttpClient.java:306)
at sun.net.www.http.HttpClient.New (HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:837)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:778)
at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:703)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream (HttpURLConnection.java:1026)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373)
at oracle.apps.fnd.cp.request.FSTest.retrieveFile(FSTest.java:506)
at oracle.apps.fnd.cp.request.FSTest.runREQOUTMode(FSTest.java:380)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runFULLMode(FSTest.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runProgram(FSTest.java:132)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
+-REQOUT failed test. ------------------------------------------------+
REQLOG +-operation test-+.
-Recovery of log file for the concurrent request 53051882
-The name of the file is: /rst4025/app/common/log/l53051882.req
It is located on the node: ADELVMTR01
-Call to FND_WEBFILE. SET_DEBUG
-Call to FND_WEBFILE. GET_URL
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=366936850
-The values stored in FND_FILE_TEMP for this request:
--------------------------------------------
FILE_ID: 366936850
FILE name: /rst4025/app/common/log/l53051882.req
Node_name: FNDFS_APPLTOP_adelvmtr01
Mime_type: text/plain
TRANSFER_MODE: TEXT
REQUEST_ID: 53051882
EXPIRES THE: 13-SEP-07 20:00:07
FILE_SIZE: 0
DESTINATION_NODE: null
DESTINATION_FILE: null
TRANSFER_TYPE: null
NATIVE_CLIENT_ENCODING: WE8MSWIN1252
OPINION ON: 0
PAGE_SIZE: 0
ENABLE_LOGGING: Y
--------------------------------------------
-Make connection HTTP FNDWRR.exe
Exception, run the REQLOG test: java.net.ConnectException: connection refused
java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
at sun.net.www.http.HttpClient.New (HttpClient.java:306)
at sun.net.www.http.HttpClient.New (HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:837)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:778)
at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:703)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream (HttpURLConnection.java:1026)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373)
at oracle.apps.fnd.cp.request.FSTest.retrieveFile(FSTest.java:506)
at oracle.apps.fnd.cp.request.FSTest.runREQLOGMode(FSTest.java:419)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runFULLMode(FSTest.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runProgram(FSTest.java:132)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
+-REQLOG failed test. ------------------------------------------------+
+- Running MGR test ---------------------------------------------------+
-Recovery of log file for the process of 2693527 Manager
-The name of the file is: /rst4025/app/common/log/w2693527.mgr
It is located on the node: ADELVMTR01
-Call to FND_WEBFILE. SET_DEBUG
-Call to FND_WEBFILE. GET_URL
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=3980490565
-The values stored in FND_FILE_TEMP for this request:
--------------------------------------------
FILE_ID: 3980490565
FILE name: /rst4025/app/common/log/w2693527.mgr
Node_name: FNDFS_APPLTOP_adelvmtr01
Mime_type: text/plain
TRANSFER_MODE: TEXT
REQUEST_ID: 0
EXPIRES THE: 13-SEP-07 20:00:07
FILE_SIZE: 0
DESTINATION_NODE: null
DESTINATION_FILE: null
TRANSFER_TYPE: null
NATIVE_CLIENT_ENCODING: null
OPINION ON: 0
PAGE_SIZE: 0
ENABLE_LOGGING: Y
--------------------------------------------
-Make connection HTTP FNDWRR.exe
MGR test runtime exception: java.net.ConnectException: connection refused
java.net.ConnectException: connection refused
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
at sun.net.www.http.HttpClient.New (HttpClient.java:306)
at sun.net.www.http.HttpClient.New (HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:837)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:778)
at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:703)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream (HttpURLConnection.java:1026)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373)
at oracle.apps.fnd.cp.request.FSTest.retrieveFile(FSTest.java:506)
at oracle.apps.fnd.cp.request.FSTest.runMGRMode(FSTest.java:458)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runFULLMode(FSTest.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.cp.request.FSTest.invokeTest(FSTest.java:166)
at oracle.apps.fnd.cp.request.FSTest.runProgram(FSTest.java:132)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
+-MGR failed test. ---------------------------------------------------+
+-FULL test completed successfully. ----------------------------------+
Is ERROR: failure of 4 of the 5 tests.
Is end RT program. =====================================================
Our facility consists of 8 knots:
ADELVMTR01 (node CM)
ADELVMTR02 (node CM)
ADELVMTR03 (node CM)
ADELVMTR04 (node CM)
ADELVMTR05 (WEB/SHAPE node)
ADELVMTR06 (WEB/SHAPE node)
ADELVMTR07 (WEB/SHAPE node)
ADELVMTR08 (WEB/SHAPE node)
All 8 nodes use the same file system mounts: rst4001 and rst4025 and we have a F5 load balancer with SSL acceleration. When I saw the mistakes in the FS Diagnostic Test above, I noticed that every time he will use FNDWRR.exe, it uses:
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=3980490565
adelvmtr01 is a CM node so I thought this is probably why the test is a failure and I need to use a WEB/FORM as ADELVMTR05 node, so that the url, with what it tests can use http://adelvmtr05.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_id=3980490565
and do not give a connection refused.
The server node that I am inputing in the test is the node to which it asks to the database which is ADELVMTR01. I decided to rerun the test and feed ADELVMTR05, but the test still uses adelvmtr01 and fails in the same why.
I also see in the test when it generates this URL, it is said:
-Call to FND_WEBFILE. GET_URL
-Using URL: http://adelvmtr01.xyz.gov:23799/OA_CGI/FNDWRR.exe?temp_ID=3980490565
The question is, is anyone know how I can get this test using one of my knots/WEBFORM to test HTTP FNDWRR.exe so that eventually it will work correctly?
We have 3 other instances R12 on these same servers that appear to be in the same place and work properly. Ultimately, my goal is to set the "Application Server cannot open file for read ' error in the browser, but I feel that if I can get this test runs correctly, perhaps it will shed light on what is our problem.
Thanks a lot for taking the time to look at it. I appreciate any help you may be able to offer.
Sincerely,
Chris
Hi Hussein.
I am pleased to announce that I have found the problem. It turns out that in my tnsnames.ora, was - this entry:
FNDFS_APPLTOP_adelvmtr01 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp) (HOST = ADELVMMR01.xyz.gov)(PORT=23797))
(ADDRESS = (PROTOCOL = tcp) (HOST = ADELVMMR02.xyz.gov)(PORT=23797))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR01.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR02.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR03.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR04.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR05.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR06.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR07.xyz.gov))
(ADDRESS = (PROTOCOL = tcp (PORT = 23797))(HOST=ADELVMTR08.xyz.gov))
)
(CONNECT_DATA =
(SID = FNDFS)
)
)
These first two servers are external DMZ server, so it seems that every time that FNDWRR.exe was using this FNDFS entry, he was trying to connect to the DMZ server and have refused. As the external DMZ iSupplier servers use the same database as these internal nodes, these have been sucked into the last time, I ran autoconfig. I removed the first two lines and the files began opening.
Thank you very much for your help!
Chris
-
I ran the HP's Diagnostic Test twice and he came the same twice (Test to go snack) ME516-16W error code. Error code (checkerboard Test) ME516-15W. ME516-17W error code (a left walk Test). ME516-18W error code (a right walk Test). Error code (model auxiliary Test) ME516-3W. ME516-5W (Advanced Pattern Test) error code. The rest of the test came out good. Anyone know what could be the problem and what should I do about it? Thanks advance.
Coordinates:[personal information deleted]
Please, turn off your computer and remove the memory DIMM. Then, use a can of compressed air, blow gently dust and dirt on the memory locations. Now put the DIMMs and test your computer again by using the HP Test's diagnosis. If the errors continue, please remove all except one DIMM and test the computer again. Tests if DIMM, remove it and put it aside. Continue his tests the remaining DIMM in the same way, taking care to note that DIMM is good and which are bad. If all DIMMS test good or bad, retest them in another location.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Modem failed the diagnostic test
I ran a Windows diagnostic test and it came with this test failure modem Agere Systems PC1Soft MC921-2w what it takes please
Hello
· What is the brand and model of the modem?
· What were the changes made on the computer prior to the question?
I suggest you contact your ISP or Modem manufacture to improve assistance on the issue. In the meantime, you can follow these steps and check if that helps.
(a) reset your modem. See the documentation for more information on how to reset the modem.
(b) If you have an external modem, make sure that you use the right cable series. For more information on the requirements for a proper wiring, refer to the section 'Wiring required Configuration' in aid of Dial - Up Networking.
(c) If you have an external modem, make sure that the serial cable is properly connected.
(d) If you use an adapter to connect your external modem to your serial port, make sure that the pin adapter is wired properly for modem communication. For example, a 9-to-25 pin for a mouse adapter malfunctions with a series of RAS configuration.
(e) test the serial port or multiport card and replace the adapter if necessary.
(f) ensure that the modem communication protocol options are configured correctly. See the documentation for more information about the different transfer protocol options that are available for your modem.
(g) contact the modem manufacturer to see if the initialization and configuration information are available for your modem. Also, check the Windows hardware compatibility list most recent (HCL) to make sure that your modem is supported.
(h) use the Device Manager to remove the modem. You can do this in safe mode or in normal mode. Restart the computer in normal mode. Windows XP will detect the modem and reinstall the proper drivers.
-
HP TouchSmart 300-1020: buttons HP Support Assistant diagnostic Test does not
I have HP Support Assistant version 7.7.34.34, which - I think - is the right version for my TouchSmart from HP with Windows 7 64-bit 300-1020.
When I try to run a diagnostic test (optical drive, USB key, sound card test, test test the printer, hard drive, keyboard, map chart, microphone, mouse), the button snaps (with mouse) for diagnosis, tests do not work.
Basically... I click on the button for the desired... diagnostic test and nothing happens!
Troubleshooting apparently buttons function very well... click on one and a convenience store starts.
What can I do to "solve" the problem of Diagnostics button? Thank you!
You are welcome.
Since your computer is 6 years old, I suggest that perform you a System Recovery. I do this at least once a year because I like a computer that works like new without any problems.
-
Hardware error code Diagnostic Test
During a hardware diagnostic test the short self-test gave me an error code of HD521-2W. What does that mean and how do I fix?
Here are the specifications and configurable options for your desktop HP Pavilion Elite HPE - 310 t CTO. Since it is a configuration in the application system, you will need to determine what size and type of hard drive is in your computer based on the invoice of your order. Please consult this HP document entitled "adding or replacing a hard drive" for instructions on replacing your hard drive.
-
Diagnostic test returns with this error: 1000-0146.
Original title: 1000-0146
ran diagnostic test and error code from 1000-0146 everything works ok
Why do you think that will help a clean boot?
It is a pre-boot diagnostic assessment Dell computer error code you can read here:
I think it means that the hard drive may be failing. How will a start clean and check correct this?
It seems that these companies will show anything to get a link to an article here somehow - even if it makes no sense.
If forums MS Answers would invite some information about the system, when a new question is asked, maybe... just maybe we would not have these answers.
-
Diagnostic test error: drive hard hitachi failed the diagnostics tests
My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months. Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify. I need to replace the hard drive?
Hi Pete,.
You are welcome.
It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.
Best regards
DP - K
-
Please help my friend
When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computerPlease see: Missing file \Windows\system32\winload.exe
-
Hi, just did a diagnostic test on my Z2... everything works perfectly, but failed the test of speaker.
Tried several times but still the same...
Any ideas how to rectify, not a big problem for me, but just like having all work 100%
Thank you very much
St did a reset of "turn on the button/volume"... tested fast again & his works very well!
Strange but happy his new on ok... Thanks for your help
Maybe you are looking for
-
CP 4525 always want to get the paper from a TRAY
Hello We have a problem with our printer HP CP 4525 DN- -The tray in the printing options is "Auto" and "A4" paper size -On printing, the printer always stop and ask us to feed paper manually in a status bar! -We already have 'A4' tray for two! -Any
-
Connection WIFI on Satellite M30
HelloI have the Satellite M30 with an Intel PRO Wireless 2200BG Driver version 8.1.0.26 adapter set the driver installation was successful, but when I click on connect it displays unavailable connection. but one of my friends uses his computer laptop
-
Linksys E2000 together at 5 GHz stops transmitting SSID and becomes undetectable to 5 Ghz AC580
Bought a USB wireless adapter dual band AC 580 today and set the channel to "5G" only mode I put my E2000 (firmware 1.0.04)is) to 5 GHz, made sure the SSID broadcast is turned on. The wireless adapter appears as a peripheral AE6000 in windows 8.1. Ve
-
Why are these windows not my data connection - I now have to connect whenever I go to the site
Why not "remember me".
-
cannot pair mobile mouse wireless Microsoft 6000 with a Toshiba bluetooth usb adapter
I have a toshiba bluetooth usb adapter, which is supposed to be able to connect with up to 7 bluetooth devices, but I can't seem to do recognize/find my Microsoft 6000 wireless mobile mouse. is it because the mouse has its own transceiver or I do so