Hauppauge HVR-1800 with FIOS STB, IR hardware not detected

Similar Questions

• "IR hardware not detected" error when you try to configure the TV signal in Windows XP Media Center 2005 with Service Pack 3

  I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
  Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
  but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
  on the system (bought in November 2006). I've updated the drivers for the TWO
  the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
  address this problem. Any suggestion on how to solve this problem would be greatly
  appreciated. What HP had try me, including Sofpaq fixes are not
  address my problem. It does not give the error "IR hardware not detected".
  overnight, it correctly detects the signal from my digital cable box.
  The main problem could partly be the we FINALLY converted to digital television
  signal and I always try to use the analog tuner ExpressCard? Once again
  any help is greatly appreciated.

  I found this fix on another site.  We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media.  The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do).  With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation.  I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed.  I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.

• Windows media center ir hardware not detected units

  Hi all

  It's my whole first time attempt to install a tv tuner and set up and I have difficulties. I try configuring a hauppauge hvr 1850 in windows media center on windows 7 64 bit. My TV provider is directv and windows media center detects my decoder when it searches for tv signals. It does not detect my tv tunter as well, but he says no signal and I have to configure manually. After you manually configure my tv tuner, I get another message saying "ir hardware not found." I tried a lot of workarounds and none of them does not seem to work, I have a windows media center certified remote provided with my tv tuner and I can control everything in windows media center, but it stops said ir hardware not detected. I need help serious because I am running out of options. Does anyone use directv on this particular tv tuner?

  Have you downloaded Windows Media Center remote control receiver/blaster configuration utility?

  Go through the procedure step by step, as described in the following article: -.

  Windows Media Center double Tuner and decoder Setup

  (in your case STB single)

• IR hardware not detected

  I have a card WinTV - HVR 1600 internal HDTV on my computer, but Windows Media Center does not detect the material in the IR. I have a Media Center remotely from a previous IR Blaster and you can use this remote control and the one supplied with the card WinTV Media Center control, but when installing Media Center, he says IR hardware not detected.

  Hello

  Try these steps and check if that helps:

  Step 1: Change due to Windows Media Center Receiver Service log

  a. Click Start, type "services.msc" in the search bar and press ENTER. Click on continue if UAC window is prompted for permission.
  b. double-click Windows Media Center Receiver Service.
  c. on the 'Log On' tab, select the Local System account.
  d. click on apply, OK.
  e. right click on the Windows Media Center Receiver Service and click the "Restart".
  f. check service to make sure it's status is started.

  Step 2: Update the drivers for the WinTV-HVR-1600.

  You can download the latest drivers from the link below:
  http://www.Hauppauge.com/site/support/support_hvr1600.html#mediacenter

  Download and install the drivers manually.

  Greetings,
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center IR hardware not detected

  Hi, I'm stuck at the 'IR Hardward not detected"when you try to set up the TV.

  I am in Australia and have a wireless component gets my digital signal in another room.  www.cocoonsystems.com.au I run a Haupaggue (spelling?) TV tuner.  The TV tuner may display the signal from my cocoon via its product called WinTV.  It is consulted on the Composite connection.  (PC is a new computer from Dell with Vista desktop loaded)

  So, when I go to configure Media Center to see the signal as I do the following:
  1. set up TV signals
  2. Australia region
  3. choose antenna
  4. Select digital terrestrial
  5. Select Yes (for the view through a decoder, because the other option does not find my signal)
  6. He found the photo and playback of the sound by means of Composite 1, so I select it
  7 IR hardware not detected.

  Media Center doesn't let me step by-pass 7 if I don't have an infrared connection.  I have no need of my PC to change the channel because I use the remote control digital TV to change the channel through the Cocoon system.

  Is there a way someone knows I can work around that this troublesome matter of IR hardware not detected?  I can only assume if I had my video camera connected through the Composite connection I would have the same problem too, because that was not a remote control.

  What can I do?

  Balibooblue,
  Thank you for visiting the Microsoft Answers community forum.

  The only way I know to bypass the need for a hardware device to IR during the installation of Media Center to watch TV is to use a "virtual" infrared device  There is one called "Vista MCE IR Blaster" is a file that you download from the Internet that simulates an infrared device.  You will need to do a search for it.  Or you can buy the hardware Media Center application relatively cheaply online, on the USD $20.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  Let us know if this information was useful or if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• E9150T - Windows 7 Media Center - IR hardware not detected

  Hello.  I finished the upgrade from Vista to Windows 7 earlier today.

  While the upgrade went OK, Media Center can't access hardware IR for a reason any.

  I always get the IR hardware not detected error message.

  I do not anything with the prior agreement of material or after the upgrade.

  I'm running on an E9150T and I think IR's eHome Infrared Receiver via USB.

  Any help is appreciated as I did not find anything Googling for the last two hours.

  PDXPat

  Problem seems to be resolved.  Do not know which of the following has solved, but I made the following two tasks:

  1. connect a second infrared device on the second port of the IR Blaster.  Previously, it was empty.  Alone, this does not solve the problem.

  2. the system to reboot.

  3 went through a detailed set / Media Center, and simple configuration.

  Alto!  The IR Blaster seems to work now...

  PDXPat

• Tuner tv WinTV-HVR - 950Q with built in ir does not work in WMC

  I am running Windows 7, 64 bit. I use a Hauppauge Win TV - HVR - 950Q with IR, tv tuner built-in and I also have a remote control supplied with the tuner. I connect to a cable box. During the implementation of WMC, I get an error message that says THAT WMC cannot detect any IR material. Someone at - it successfully implemented this particular tuner? If so, can you tell me how did you have the IR error message. Any help would be greatly appreciated.

  See http://www.hauppauge.com/site/support/support_mce.html.

  You need the driver package to present the Media Center IR Hauppauge remote control.

• Headset with Microphone plugged in but not detected

  Recently, my brother got a Philips SHM7410U Philips PC Headset with Microphone and tried to make it work for him. It's probably 'plug and play' as it came with no instructions except that. It is plugged in, but my computer does not detect the microphone or headset. The headphones are not listed in the playback devices, and while the microphone is listed, it is said that it is not plugged. They are certainly in the right decision. Not too knowledgeable in the resolution of this type of problem and could use some help.

  Hi Genae,

  I thank you for your message and gives us a chance to help you. I see that you can not use the headphones and the microphone.

  The headphones and the microphone work on another computer?

  You can follow these methods to check whether the problem is resolved.

  Method 1: Run the hardware troubleshooting tool.
  Follow the steps in this link
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Select the default values of the device
  (a) click on 'Start', then 'Control Panel '.
  (b) click on 'hardware and sound '.
  (c) Under sound, click "manage audio devices.
  (d) click on the playback device you want to output sound.
  (e) click set default.
  (f) do the same for the microphone and then click OK

  Method 3: Updated drivers

  You can follow the steps in this link to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  For more information.

  http://www.P4C.Philips.com/cgi-bin/cpindex.pl?CTN=SHM7410U%2F10&DCT=FAQ&faqview=1&new_tmpl=1&refdisplay=PCHEADSET_QAC_63472&refnr=0063472&scy=SA&SLG=AEN

  If the headphones do not work on another computer, contact the manufacturer.

  Feel free to use the forum for any other issue of Windows, you may have.

• Re: Bluetooth hardware not detected on Satellite M40-145

  Hello

  I recently changed the HD of my Satellite M40-145. I have successfully used the recovery CD, office etc, and now everything seems to work fine... All except the Bluetooth, it is not detected (this laptop has a Bluetooth chip internal). It does not appear on the Device Manager list. I was reading some FAQ in the web of Bluetooth Toshiba and tried to install it again Toshiba Bluetooth Stack but there is still not detected. Any idea?, any solution?

  Thanks in advance for your attention (and I apologize for my bad English)

  If your laptop is preinstalled with original recovery image please activate the BT module (WLAN WIFI switch must be ON, and then use the FN + F8 key combination) and I hope that BT's standard installation starts automatically.

  When you are finished Device Manager check again. The components of BT enabled and installed should appear correctly.

• Impossible to use the webcam with Skype, but it is not detected

  webcam problems

  built in cam, but when I try to Skype it says it is not detected?... don't know if it's my Skype or my comp sumone... does know?

  A moderator has moved this thread to Windows for the hardware and drivers Forum

  Hi, Twyla,

  Is everything up to date?  Drivers, etc...?

  Open Windows Event Viewer. Access custom views-> administrative events. Search for recent error messages. Click on all errors and view the details here if they time things fail.

  Try this Fixit M.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Controls graphics issues

  http://community.Skype.com/T5/idea-garage/TheUberOverLord-video-issues-checks/TD-p/156710

• Installation for the new video card will not work. Message "Hardware not detected" what's the problem?

  Windows XP Home Edition. Motherboard ASUS P4PE. (Old) NVIDIA geforce4 TI 4400 failed - video card replaced by Prowler Radeon 7000 64 MB agp (Mad Dog). The black screen with the old card and bought a new one. At out the old card and installed a new.  Start the computer and graphics were. With Nvidia drivers installed, display settings could be changed. Device, 'Monitor' Manager showed now default monitor instead of good Sony monitor. Remove all drivers video and rebooted.  Screen "new hardware found" appeared, but I couldn't get the new drivers loaded. I inserted the disc by the manufacturer, but the pilots has not can be detected. Has attempted to launch "Setup" on the disc, but received a material not found error message. Yellow mark points to "Other devices" and the hyphen "VGA Display adapters". No 'monitor' in Device Manager. Tried to turn off the windows firewall and Virus software. I tried windows update. Still have a problem. What's wrong?

  The old drivers must remove the first test pilot seeper guru3d.

  The nvidia Setup program should find the material but otherwise download the latest version of the software from their Web site.  They must be the pilot, right down to the revision number, not only the model number.

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• What's compatible with FIOS router BEFW11S4?

  My daughter has a Verizon FIOS as his ISP.  The BEFW11S4 can be used in such an environment?  Are there special settings I should change when it is used in this environment?

  I think it can work because that BEFW11S4 supports the PPPoE connection.

  I think that even with Fios, you can use your old router with the system, they just give you a free when you sign up.

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.